1. BLOW MOLDING TECHNOLOGIES
Flexibility, Speed and Quality are Key for Custom Blow Molders
BUILT SPECIFICALLY FOR
CUSTOM BLOW MOLDERS
As a custom blow molder, you demand
more from your equipment. At Amsler, we
deliver machines that are simple to run
and maintain with fewer moving parts.
Our quick changeovers are a must have.
Amsler machines range from 1 to 4 cavities
with outputs of 1,500 to 6,000 bottles per
hour. Consistent, quality output is built into
everything we make.
In addition to providing top quality
equipment, we will partner with you to help
develop and test your package.
Amsler is the only North American
manufacturer of all-electric linear PET stretch
blow molders, 100% designed, built and
serviced in North America.
ADVANTAGES
ENERGY EFFICIENCY
» Servo electric movements to save energy
» Closely spaced preforms saves energy
» Less air consumption saves energy
RELIABILITY
» Easy to maintain
» Machines require 75% less maintenance
than hydraulic machines
PRODUCTIVITY
» Output speeds of up to 6,000 bottles/hr
» Proven efficiencies and repeatability
» Use Blow Molds from other brands
including Sidel and MAG
»
L32 - 3 CAVITY
CONVERTIBLE MACHINE
VERSATILITY
» Available in 1,2, 3 and 4 cavity models
» Fast changeovers; 20 minutes to 2 hours
» Few moving parts means higher reliability
FAST CHANGE-OVERS
» Perform carrier changes without tools
» Quick oven adjustments
» Easy access to all parts of the machinery
SIMPLE AND RUGGED
» Few moving parts
» Heavy tubular welded construction
» Very low maintenance
» DELIVERING MORE FROM YOUR BLOW MOLDING EQUIPMENT

2. » Adjustable air flow in the ovens
» Unblown preform rejection system
» Safety warnings and machine
shutdown on low air pressure
» Individual low pressure blowing
with flow control valves
» Checklists on the touchscreen
operator panel
» Adjust the mold closing speed on
the touchscreen operator panel
» Adjust preform transport speed on
the touch screen operator panel
» Adjustable preform rotation speed on
the touch screen operator panel
» All settings are stored in the
recipe memory
» Fault screen with real time display
» Automatic starting and stopping
with bottle back up sensors on the
downstream conveyor.
» Closed loop oven control
» Servo operated stretch rods
(most models)
» Servo electrical mold clamping system
» All mechanical settings have scales
for repeatability
» Quick mold change
» Quick preform carrier change
» Operator height mold access
» Molds are interchangeable between
most models
» Major competitor’s molds can
be fitted
» Blowing inhibit system for
preforms that do not meet the
right temperature.
» Color operator interface
» Automatic fault display
» Diagnostic screens
» Recipe Storage
» Separate cooling circuits for
bottom inserts
» Preform temperature monitoring
with alarm
» Electronic mold protection
» Height adjustable take out system
to suit your conveyor system
CONVERTIBLE SERIES FOR THE CUSTOM
BLOW MOLDER - FLEXIBLE CAVITATION
» L32 Convertible: Run 1, 2 or 3 cavities
depending on the bottle size and output
requirement. Necks up to 63mm.
» L42 Convertible: Run four cavities up
to 2 liter or two cavities up to 5 liter.
MACHINE TYPES
» Narrow Neck Series: L12, LM12, L15,
LM15, L22X, L25, L32C, L32X, L42C, L43C
(LM=manual loading of the preforms)
» Wide Mouth Jars: L15 JAR, L25 JAR,
» Large Format Containers:
L110, LM120, L120 Convertible, L215
» Complete product chart available at
amsler equipment.net
MACHINE CAPABILITY
» Hot Fill Containers
» Preferential heating
» Neck Orientation
» Wide Mouth Jars
» Small footprint
LARGE COLOR TOUCH SCREEN OPERATOR
PANEL WITH ONSCREEN DIAGNOSTICS
» On Screen System Monitoring
» On Screen Diagnostics
» Water Flow Monitoring
» Water temperature Readout and Alarm
» Air Pressure Readout and Alarm
» Oven Temperature Readout
» Individual Preform Temperature Readout
STANDARD FEATURES
ABOUT US
W. Amsler Equipment Inc. is a Canadian
company founded by Werner Amsler. Since
1994 the Amsler group has been helping plants
in North America and worldwide with Blow
Molding Machines and ancillary equipment
such as: Leak Testers, Spin Trimmers,
Air Compressors, Process Chillers, Mold
Temperature-Control Units, Gaylord Dumpers,
Palletizers, Labelers, Vacuum Conveyors, Blow
Molds, Mold Testing, Pilot Production and Turn
Key Plant Design and Installation.
W. Amsler Equipment Inc. is the only North
American manufacturer of all-electric linear
PET stretch blow molding equipment, 100%
designed, built and serviced in North America.
Amsler Packaging Solutions can offer filling
equipment and turnkey installations for Liquid
Filling Projects.
SERVICE AND TECHNICAL SUPPORT
Our service technicians are based in the
US, Canada and Mexico. They are available
for both onsite and phone support.
You can reach support by emailing
service@amslerequipment.com or
by calling toll-free 1-877-738-2569
(US, Canada), or 905-707-6704.
NEXT DAY PARTS DELIVERY
ACROSS NORTH AMERICA
More details are available at
www.amslerequipment.net/sales
CONTACT INFORMATION
www.amslerequipment.net
sales@amslerequipment.net
CANADA
Phone: 905-707-6704
Toll Free: 1-877-738-2569
Fax: 905-707-6707
W. Amsler Equipment Inc.,
1245 Reid Street Unit #1,
Richmond Hill, Ontario,
Canada, L4B 1G4
UNITED STATES Toll Free: 1-877-738-2569
MEXICO, LATIN AMERICA, CARIBBEAN
Phone: 905-707-6704
www.amslerequipment.net