mis

1. Presented by,
Modi Harshil Rakeshkumar.
Roll No.:- 21927
College:- BK School of Professional and Management Studies
Guided By: Prof. Rujuta Shah
MIS SYSTEM IN PTPL
INFORMATION SYSTEM MANAGEMENT

2. Precision Technoplast Pvt. Ltd.
• Precision Technoplast Pvt. Ltd. is an internationally reputed firm which specializes in developing
high precision injection moulds and plastic components.
• The company can point to over 40 years of experience and has been actively exporting its moulds
and components all over the globe.
• By concentrating and expanding the available resources, the firm has created a highly efficient
centre of competence and specialized knowledge covering the sectors of high precision machining,
mould and product development, and plastics engineering.

3. Process at Precision Technoplast Pvt. Ltd

4. Network in Precision Technoplast Pvt. Ltd
 Connection or cabling system
 Microcomputers with network
interface cards
 Network OS
 Other shared devices
 Routers, bridges, and gateways
 Hub

5. Software used in Precision Technoplast Pvt. Ltd.
Many Software are used in Precision Technoplast Pvt. Ltd. on bases of department requirements and
makes them work accurately, fast, and easy.
 Account Department
 Tally ERP 9
 MS Office
 Design Department
 NX 9 (Unigraphics)
 Autodesk MoldFlow Adviser 2018
 Autocad 2012
 MS Office
 Manufacturing Department
 MS Office
 Quality Department
 Minitab 14
 QSPAK (Mitutoyo)
 Rapid-I
 MS Office
 Maintenance Departments
 MS Office

6. Tally ERP 9
 We are using Tally ERP 9 in account department for track and manage all of our company's
accounts, sales, debts.
 Also we are using this software for PO tracking, Order tracking, And Inventory tracking.

7. NX 9 (Unigraphics)
 Unigraphics NX (also known as
Siemens nx) is an advanced
CAD/CAM/CAE software
package originally developed
by UGS Corporation, But since
2007 it is owned by Siemens
PLM Software.
 We are using this software in
design department.
 Used of Software
1. Part Design
2. Mould Design
3. Mould Assembly Design
4. Drafting
5. Programming (CAM)

8. Autodesk Moldflow Adviser 2018
 Mouldflow Adviser is a
producer of simulation
software for high-end
plastic injection
moulding computer-aided
engineering. It is owned
by Autodesk.
 We are using this software for
analysis purpose after
complete the mould design. Or
some time we use during the
mould design it’s depends on
complexity of part.
 Used of Software
1. Cooling System Analysis
2. Flow Analysis (Fill-up Analysis)
3. Warpage analysis
4. Shrinkage analysis
5. Part Fill-up Timing analysis

9. AutoCAD 2012
 AutoCAD is a drafting software
application. Which is
Developed and marketed by
Autodesk, AutoCAD was first
released in December 1989 as
a desktop app running on
microcomputers with internal
graphics controllers.
 Used of Software
1. 2D Drafting
2. 3D Drafting
3. Drafting of any parts and
products

10. Machine Vision Screen Cad Screen (Measurement)
Rapid-I
 Rapid-I is a software of Vision
measuring machine. This
software developed by
Customised Technologies
Private Limited. And this first
Indian company in this sector.
 We are using this software in
Quality department.
 Used of Software
1. Part Measurement
2. Reverse Engineering
3. Parts and drawing
Comparison through
superimposed.

11. QSPAK (Mitutoyo)
 QSPAK is a also a software of
Vision measuring machine. This
software developed by
Mitutoyo.
2007 it is owned by Siemens
PLM Software.
 We are using this software in
Quality department.
 Used of Software
1. Part Measurement.
2. Programming Measurement.
3. Critical Product Measurement
which is can’t measured by
Vernier Caliper, and
Micrometer.

12. MINITAB 14
 Minitab is statistic software
which is developed by minitab
in 1972.
 Minitab automates calculations
and the creation of graphs, it’s
allowing us to focus more on
the analysis of data and the
interpretation of results.
 We are using this software for
Process capability index
 Used of Software
1. Cp-Cpk Analysis

13. Thank You