This document provides an overview of herbicides, including their history, classification, toxicity, and examples. It discusses how herbicides are defined as chemicals that kill or inhibit plant growth. The history outlines some of the first herbicides used dating back to the 1890s and the commercialization of 2,4-D in the 1940s. Herbicides can be classified based on selectivity, activity, residual effects, and application timing. Contact herbicides only affect the parts of plants they contact while systemic herbicides are translocated within plants.
2. Unit 6 – Topics Covered
Herbicides:
Introduction to herbicides
History, nomenclature, toxicity,
classification
3. Introduction to Herbicides
• Herbicide defined as any chemical
agent that kills or greatly inhibits
plant growth. They were made to
specifically and mainly kill plants.
• Literally means "plant killer".
4. 1. History of Herbicides
• 1890 to 1900 - sodium arsenite to control aquatic
plants in waterways in the US.
• 1925 - sodium chlorate (direct soil application)
was first used for killing weeds.
• 1934 - sodium nitrocresylate, as the first
selective weed killer in France.
5. • 1940s – first organic herbicide 2,4-D was
commercialized providing selective control of
certain broadleaf weeds in grass crops.
• 1960's – pre-emergence herbicides trifluralin
and atrazine introduced.
• 1974 - glyphosate (Roundup) available - among
the world’s most important herbicides -
S.B.Powles. Control broad-spectrum of weed
spp.
• As in 2010, more than 200 herbicides from 22
mode-of-actions available in the market.
6.
7. Herbicide facts:
• Worldwide, expenditure on herbicides accounts for approximately
40% of all pesticide expenditures (Grube et al. 2011).
http://www.epa.gov/opp00001/pestsales/07pestsales/market_estima
tes2007.pdf.
• Malaysia: 70-75% herbicide use compared to other pesticides.
• All these info make herbicides among the most used and the most
important tools in agriculture.
9. Herbicide Nomenclature
1. Active ingredient - the chemical in the herbicide
formulation primarily responsible for its
phytotoxicity.
2. Trade name - a trademark or other designation by
which a commercial product is identified.
3. Common name - each herbicidal chemical has one
common name assigned to it. In many cases, the
common name is a simplified version of the chemical
name.
10. 4. Chemical name - the systematic name of a chemical
compound according to the rules of nomenclature of the
International Union of Pure and Applied Chemistry
(IUPAC), Chemical Abstracts Service (CAS) or other
organization.
Example:
11. • Toxicity: danger/poison level
• Based on oral LD50 values on the test
population (animal).
• The lower the LD50 value, the less chemical that is
required to reach lethality.(LD5010 is more toxic than
LD50100)
• LD50 value measurement: mg/kg
• Info: Material Safety Data Sheet (MSDS) or Safety Data
Sheet (SDS) for each herbicide.
3. Herbicide Toxicity
13. Table 2. Comparison of oral LD50 values for commonly
used herbicides and consumer goods.
Herbicide LD50 Common consumer
chemicals
LD50
Paraquat (Gramoxone) ~100 Nicotine 9-10
Pinoxaden (Axial) >3100 Bleach 192
2,4-D 666 Caffeine 192
Atrazine 3090 Household ammonia (10%) 350
Glyphosate (Roundup) 4900 Table salt 3000
Glufosinate >430 Codeine (pain and cough
relief)
427
Source: Fishel et al. 2009
14. Herbicide Classification
• Herbicides can be classified based on
different activity, herbicide chemistry
(chemical family or mode of action),
placement, time of apply, or type of
vegetation controlled (selectivity).
15. A. Selectivity: Selective vs. Non-selective
1. Selective: toxic to some species and much less
toxic to others at a given dosage. A selective
herbicide kills weeds but not the crop.
2. Non-selective/broad-spectrum: kills or severely
damages all or most species. A non-selective
herbicide kills weeds and potentially crops.
• A selective herbicide can be made non-selective
by applying improperly or by applying high rates.
Selectivity is usually rate dependent.
16. Herbicide Selectivity
16
Selective: A herbicide that is more effective in
controlling some plant species than others.
Broad-Spectrum/Non-Selective: A herbicide that
controls many plant species.
No
activity
No
activity
Activity
19. B. Activity: Contact vs. Systemic
1. Contact herbicides: destroy only that plant
tissue touched by the chemical.
a. Effective only on tissue contacted by
application of herbicide
b. Very little movement (translocation) within
the plant
c. Full spray coverage essential (because no
translocation, must get spray deposited on
most of plant).
20. Contact vs. Systemic cont…
d. Usually exhibit acute effects - kill rapidly
e. Effective for annuals, usually ineffective for
perennials (because no translocation to
underground reproductive organs)
f. Can be selective or non-selective.
21. Contact vs. Systemic cont…
2. Systemic herbicides
a. Absorbed by roots or above-ground
parts (depends upon particular
herbicide and application method),
translocated within plant.
b. Good spray coverage is necessary with
all herbicides, but less critical than
contact herbicides because of systemic
herbicides can be translocated.
22. Contact vs. Systemic cont…
c. Usually exhibit chronic effects - slow
acting.
d. Effective on annuals, some are
effective on perennials; effective on
perennials because of translocation to
underground organs.
e. Can be selective or non-selective.
23. Effect of different types of herbicides
on Asystasia spp. in Rubber
Paraquat
Glyphosate: systemic Paraquat: contact
24. C. Residual activity: Residual vs. Non-residual
1. Residual: Herbicide retains activity on susceptible
weeds for some time following application. Length
of residual depends upon the particular herbicide
and the application rate.
2. Non-residual: Herbicide has activity only on weeds
present at time of application. Does not provide
control of weeds that emerge after application.
4. Herbicide Classification cont…
25. D. Type/time of application
• Pre-plant incorporated: applied to soil and mechanically
incorporated into the top 2 to 3 inches of soil before the
crop is planted
• Pre-plant: applied prior to planting the crop
• Pre-emergence: applied to the soil prior to emergence of
the crop or weed
• Post-emergence: applied after emergence of the crop or
weed
29. E. Methods of application
• Refer to the ways herbicides can be applied:
1. Broadcast: applied over the entire field
2. Band: applied to a narrow strip over the crop row
3. Direct: applied between the rows of crop plants with
little or no herbicide applied to the crop foliage
4. Spot treatment: applied to small, weed-infested areas
within a field
Editor's Notes
It is important to keep in mind that herbicides differ in the number and type of weeds they control. This is referred to as the weed spectrum. For example some herbicides control only a few plant species and thus have a limited or narrow spectrum of control.
<mouse click>
Herbicides that control many weed species are generally referred to as broad spectrum herbicides.
Sometimes there can be confusion around whether a particular weed is tolerant or resistant to a herbicide. If the weed was never controlled by the herbicide in the first place, according to the language on the label, then it is tolerant. This is true for both narrow and broad spectrum herbicides.
<mouse click>