Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Bmc permit 1
1. Banu Mukhtar Contracting Pvt. Ltd.
Permit to Work (for two weeks only)
Request Section
Type of Work Requested: General Work Cold Work Hot Work Additional Permits Required:
JSEA completed/attached LOTO Permit #
Issue Date/Time Confined Space Permit #
1 Expires Date/Time Ground Dist. Permit #
Location BP Contractor Company Name
Description of Work
Contact Completed by Performing Authority
2
Contact Person/Supervisor Phone Number Radio Frequency
Equipment Condition Completed by Performing Authority and Verified by Issuing Authority
Out of Service Depressured Drained Atmosphere checked for:
In Service Pressurized Not Drained % Oxygen
3 Deenergized/Isolated Locked out % LEL
Electrically Energized Bleeders open CO (carbon monoxide)
Other Conditions: PPM for:
Work Hazards Completed by Performing Authority and Verified by Issuing Authority
SIMOPS Oxygen deficiency Pinch points Hot environment
Power tools Hydrocarbon vapor Working at heights Cold environment
Line of fire Chemical exposure Electrical Heavy lifting
4 High pressure Acids/Caustics Overhead work Falling objects
Severe Weather Sources of ignition Eye hazards High noise
Mechanical lifting Excavation Hot/Cold surfaces Sharp objects
Stored energy Limited access/egress Walking/Working surface Repetitive motion
Other Hazards: MSDS#
Controls Completed by Issuing and Area Authority
Barricades Fire watch Additional access/egress Tractel
Flagman required Standby fire extinguishers Additional lighting Tripod with retrieval device
LOTO Blanket to contain sparks Air mover required GFCI
5 Level 2 Risk Assessment Use tag line Continuous monitor required, Type
Competent person's name
Additional precautions
See site safety procedures for additional requirements
PPE Completed by Performing Authority and Issuing Authority
Standard Required PPE: (safety toed boots, hardhat, safety glasses) Protective suit, Type
Rubber boots Cooling vest Respirator, Type
Face shield/goggles Relective vest Gloves, Type
6 Hearing protection Lifeline Electrical hot suit, Type
Supplied air Safety harness/lanyard/ladsafe FRC 8 cal
20 cal 40 cal
Any additional PPE
Authorization Permit is Not Valid Until Signed
7
Date/Time
Sign
Performing Authority
Issuing Authority/Manager Plant
Return Permit to Area Authority when work is finished for the shift
Permit Sign Off Completed by BP and Contractor Representative
Work Complete Work Incomplete (Please list reasons)
8 Performing Authority Issuing Authority
Copy of Permit must be at Job Location
Novatex Plant, FIEDMC, Faisalabad
Permit No: