My paper is focused "GREEN MANUFACTURING"

1. GREEN MANUFACTURINGGREEN MANUFACTURING
PRESENTED BY,
S.GNANAGURUNATHAN,DME,
KAMARAJ COLLEGE OF ENGINEERING AND
TECHNOLOGY,
VIRUDHUNAGAR.

2. ABSTRACTABSTRACT
The aim of this paper is to identify the factors that help to implement
the green manufacturing in the industry. The paper focus on the green
design for industry and environment of green manufacturing system,
energy conservation, development of product with less wastage. The
paper also highlights the use of green manufacturing to form a
sustainable product and to reuse the product, shorter life cycle.
Together, these incorporate design for environment criteria in product
and process design phases, monitor and control manufacturing
processes to minimize waste and use of materials, conserve water
through reuse, and reduce volatile organic compound emissions through
process and solvent replacement.
Key Words: Green Manufacturing, Industry, Environment.

3. What is Green manufacturing?What is Green manufacturing?
Method for manufacturing that minimizes
waste and pollution, which is achieved
through product and process design.

4. History of Green ManufacturingHistory of Green Manufacturing
1910s Mass Production.
1970s Flexible Manufacturing
1990s Mass Customization
2000s Green Manufacturing

5. Why Green ManufacturingWhy Green Manufacturing
Important?Important?
Due to the recent global climate, human
have started to realize the vulnerability of
nature and diasasters. It may bring as
response our negligence.

6. The following are the recent stressesThe following are the recent stresses
on our Environment:on our Environment:
As much fresh water has been withdrawn
in the 30 years as in the last 3 centuries
The rate increase in atmospheric CO2
between 1970 and 2000 is nearly double
that between 1960 and 1970.
Carbon emissions have increased by more
than 1.5 times since 1970
Industrial waste “Minimize at source”

7. Benefits of Green ManufacturingBenefits of Green Manufacturing
Saves useless cost.
Reduce the Environmental waste
Improve the ecological condition
Increases the production efficiency
Promotes Research and Design.
Creates a great reputation to the public.

8. Process of Green ManufacturingProcess of Green Manufacturing
Companies move from traditional end-of-
pipe control to new technologies.
End-Of-Life Management
Waste source reduction on the spot.
Recycling
Virgin Materials are recycled

9. Application ofApplication of Green ManufacturingGreen Manufacturing
Lean Manufacturing
 Product design
Green Chemistry
Automobile Manufacturing

10. GREEN MANUFACTURINGGREEN MANUFACTURING
APPLICATION OF
GREEN
MANUFACTURING
IN AUTOMOBILE
INDUSTRY

11. Application ofApplication of Automobile IndustryAutomobile Industry

12. AUTOMOBILE INDUSTRYAUTOMOBILE INDUSTRY

13. Application ofApplication of Automobile IndustryAutomobile Industry

14. Application ofApplication of Automobile IndustryAutomobile Industry

15. Application ofApplication of Automobile IndustryAutomobile Industry

16. Application in HighwaysApplication in Highways

17. FUEL CONSUMPTIONINCRESESE INFUEL CONSUMPTIONINCRESESE IN
AFTER GREEN MANUFACTURINGAFTER GREEN MANUFACTURING
• Before Green Manufacturing Four
Wheeler Vehicle fuel consumption is
<10km/Lit.
• After Green Manufacturing the same
Four Wheeler Vehicle fuel consumption
is 18 to 20km/Lit.

18. THANKYOU
ANY QUESTIONS?