polyvinyl acetate presentation

1. By
Engineer Nathan.J.Chifamba
B-tech Hons Chemical and Process Systems Engineering (Harare Institute of Technology ,Zimbabwe)
M-Tech Polymer Science and Technology
(Amity University Gurgaon India)
Polymer Technology Presentation
(Dr Nidhi Goel lecturer)
22/12/2016

2. Polyvinyl Acetate

3. Brief History
• Poly(vinyl acetate) was discovered in Germany in 1912 by Fritz
Klatte.
• The monomer, vinyl acetate, was first produced on an industrial scale
by addition of acetic acid to acetylene with a mercury(I) salt but it is
now primarily made by palladium catalyzed oxidative addition of
acetic acid to ethylene.
• Polyvinyl acetate is prepared by polymerization of vinyl acetate
monomer (free radical vinyl polymerization of the monomer vinyl
acetate).

4. INTRODUCTION
• it is a colorless, nontoxic thermoplastic resin prepared by the
polymerization of vinyl acetate. Polyvinyl acetate (PVAC) It is one of
the most widely used water-dispersed resins.
• Polyvinyl acetate water-based emulsions have been used as latex
house paints, artists' media (since 1945), and common household
white glues..
• Poly(vinyl acetate) (PVA, PVAc, poly(ethenyl ethanoate)
• It is commonly referred to as wood glue, white glue, carpenter's glue,
school glue, Elmer's glue in the US, or PVA glue)
• It is an aliphatic rubbery synthetic polymer with the formula (C4H6O2)n.
It belongs to the polyvinyl esters family with the general formula -
[RCOOCHCH2]-.

5. PROPERTIES
Under alkaline conditions, boron compounds such as boric acid or borax cause the polymer to cross-link.
A number of microorganisms can degrade polyvinyl acetate(fungi and algae).
Sets by the removal of water due to evaporation or absorption into a substrate.
 Have good weather resistance
Withstand water, grease, oil, and petroleum fuels degradation.
good biodegradation resistance
poor resistance to creep under load.
Softens at 30-45C
Soluble in benzene, chloroform, methanol, acetone, butyl acetate
Insoluble in ligroin, diethyl ether, butanol, turpentine, water, oils
Can absorb 3-5% water when immersed for 16 hours at 60 C.
Burns with a dark yellow flame that smells of acetic acid.
Combustible.

6. Uses
• PVA water-based emulsions have been used as latex house paints.
• Making commonly used household white glues.
• Making wood glue.
• Makin paper glue.
• Adhesives.
• Glues for porous material.
• Used as a primer for drywall and other substrates.
• As a mortar additive.

7. 7
Mechanism (free radical Polymerization)

8. Free Radical Mechanism

9. Mechanism Continued
9

10. Any Questions!!!!