1. Faisal Afsar
Permanent Address: House 9,Block69, Sector G-
10/3
P.O Box Islamabad
Pakistan
Mobile: +92-3359448196
Mobile: +971-552709920
Email:faisalafsarnm@gmail.com
PROFILE
A committed professional with more than two years of significant broad-based experience in the
International repute (Inspection Services of Oil & Gas Sector). Experienced in the Oil & Gas Sector for
Non Destructive Inspection.
I have effectively managed people and resources, training & development developed and consolidated
internal systems, implemented quality initiatives and liaised with culturally diverse geographically
dispersed stakeholders.
EDUCATION:
• MATRICULATION, PESHAWAR BOARD, K.P.K PAKISTAN.
• F.SC (PRE. MED.), ABBOTABAD BOARD , K.P.K, PAKISTAN.
• B.A , PUNJAB UNIVERSITY, LAHORE, PAKISTAN.
• B.ED ALLAMA IQBAL OPEN UNIVERSITY ISLAMABAD.
EXPERIENCE SUMMARY
Organization Job Title Duration Area of Experience
Oil and Gas Tubular
Cosultent (Pvt) Ltd.
Pakistan
Trainee
Inspector
September
2011 to
February 2013
Worked as a Level II NDT
Inspector, For B.H.A
Inspection, EMI of Drill Pipes
Personal Information:
• Date of Birth : March26, 1983
• Passport No. : DH1518831
• Availability : Immediate

2. & Tubing, Casing & Tubing
Inspection, Testing Tools, Oil
Drilling Tools (Jars, Mud
Motors, Stabs & Cross Overs.
Integrated Petroleum
Services (IPS) Abu
Dhabi UAE.
Inspector Level
II
February 2013
to Till Date
Worked as a Level II NDT
Inspector, For B.H.A
Inspection, EMI of Drill Pipes
& Tubing, Casing & Tubing
Inspection, Testing Tools
(Piping, Low Torque Valves,
Choke Manifold, separators,
Oil Manifold, Gas Manifold)
Drilling Tools (Jars, Mud
Motors, Stabs, Cross Overs)
etc.
Inspection for various tools
under third party witness of
DS-1 inspectors.
•• FOLLOWING NDT TECHNIQUES WERE USEDFOLLOWING NDT TECHNIQUES WERE USED::
•• Visual InspectionVisual Inspection
•• Magnetic Particle TestingMagnetic Particle Testing
•• Dye Penetrant InspectionDye Penetrant Inspection
•• Ultrasonic Thickness MeasurementUltrasonic Thickness Measurement
•• Dimensional Check On Tool JointsDimensional Check On Tool Joints
•• Thread Profile GaugingThread Profile Gauging
•• Electromagnetic inspection (EMI)Electromagnetic inspection (EMI)
•• WORKED A TRAINEEWORKED A TRAINEE
• INSPECTOR AT FOLLOWING PROJECTSINSPECTOR AT FOLLOWING PROJECTS (Pakistan)(Pakistan):
•• HalliburtonHalliburton
•• OGDCLOGDCL
•• WeatherfordWeatherford
•• Weatherford DrillingWeatherford Drilling
•• MOLMOL
•• Baker HughesBaker Hughes
• WORKED AS A LEVEL II INSPECTOR AT FOLLOWING PROJECTSWORKED AS A LEVEL II INSPECTOR AT FOLLOWING PROJECTS (UAE)(UAE):
•• Weatherford FishingWeatherford Fishing
•• Weatherford Thru TubingWeatherford Thru Tubing
•• Weatherford Rental ToolsWeatherford Rental Tools
•• Weatherford Jar and MWD ToolsWeatherford Jar and MWD Tools
•• Weatherford TRS and UBD ToolsWeatherford TRS and UBD Tools
•• Weatherford Liner Hanger ToolsWeatherford Liner Hanger Tools

3. •• Weatherford Wire line ToolsWeatherford Wire line Tools
•• Oil Serv Wire line and BOP ToolsOil Serv Wire line and BOP Tools
• RESPONSIBLE FOR FOLLOWING INSPECTIONS AT DIFFERENT COMPANIESRESPONSIBLE FOR FOLLOWING INSPECTIONS AT DIFFERENT COMPANIES
(Pakistan)(Pakistan):
SEA AND LAND DRILLING SERVICESSEA AND LAND DRILLING SERVICES
•• Dimensional Check Tool Joints, Full Length External OD Gagging & Visual ThreadDimensional Check Tool Joints, Full Length External OD Gagging & Visual Thread
Inspection etc.Inspection etc.
•• Check Thread Profile, Check Stress Relief Groove & Bore Back Measurements, GallingCheck Thread Profile, Check Stress Relief Groove & Bore Back Measurements, Galling
and Mechanical Damaged of Thread & Seal etc.and Mechanical Damaged of Thread & Seal etc.
•• Inspection of Bottom Hole Assembly, Handling Equipments, Fishing Tools, Milling Tools,Inspection of Bottom Hole Assembly, Handling Equipments, Fishing Tools, Milling Tools,
Slings, Shackles & Rig Parts etc.Slings, Shackles & Rig Parts etc.
•• EMI of Drill Pipes.EMI of Drill Pipes.
•• BHA Inspection for all Sections.BHA Inspection for all Sections.
•• Rig Mast inspection.Rig Mast inspection.
•• Load Test for all the sections of Rig parts under Third Party witness of NSL.Load Test for all the sections of Rig parts under Third Party witness of NSL.
•• Load Test of Lifting Eyes, Shackles & Slings etc.Load Test of Lifting Eyes, Shackles & Slings etc.
•• MPI Of Stabelizers , Cross Overs, Lifting Subs etc.MPI Of Stabelizers , Cross Overs, Lifting Subs etc.
•• Shop Inspection of Mud Motors, Jars etc.Shop Inspection of Mud Motors, Jars etc.
• Inspection of Irons, Silo & Compressors. Inspection of all Pump Truck Equipments,
Cement Head, Swedges & Slings etc.
•• Inspection of Container Lifting Eyes.Inspection of Container Lifting Eyes.
•• Load Test of Lifting Eyes, Shackles & Slings etc.Load Test of Lifting Eyes, Shackles & Slings etc.
•• Inspection of Irons, Silo, Compressors, DST Tools & Slick Line Tools, Inspection of allInspection of Irons, Silo, Compressors, DST Tools & Slick Line Tools, Inspection of all
Pump Truck Equipment's, Cement Head, Swedes & Slings etc.Pump Truck Equipment's, Cement Head, Swedes & Slings etc.
•• Load Test of Lifting Eyes, Shackles & Slings etc.Load Test of Lifting Eyes, Shackles & Slings etc.
•• Mud Motors and Rental Tools.Mud Motors and Rental Tools.
Oil Serv UAEOil Serv UAE
•• Inspection of Wire Line TOOLS.Inspection of Wire Line TOOLS.
•• Inspection of BOP tools.Inspection of BOP tools.
ADOS UAEADOS UAE
•• MPI of Companion, Weld neck, Blind Flanges, Spacer Spool, Adopter Spool, Xmass treeMPI of Companion, Weld neck, Blind Flanges, Spacer Spool, Adopter Spool, Xmass tree
and wheel Head.and wheel Head.
WEATHERFORD UAEWEATHERFORD UAE
•• Inspection of Drill Collar, Stabilizer, Subs, Wash Pipe, Jars, Fishing Tools.Inspection of Drill Collar, Stabilizer, Subs, Wash Pipe, Jars, Fishing Tools.
•• JARS.Hydro mechanical jar,Daily Hydrolic drilling jar,Intensifier,Shock tools.JARS.Hydro mechanical jar,Daily Hydrolic drilling jar,Intensifier,Shock tools.
Rental Tools Inspection.Rental Tools Inspection.
•• Visual Inspection of Tubing & Drill PipesVisual Inspection of Tubing & Drill Pipes
•• Handling Tools.Handling Tools.
• Rental & Drilling Tools.Rental & Drilling Tools.