Quick Installation Guide EPG5000 English

1. Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wifiabc.com
Disclaimer: Information may be subject to changes without prior notification. Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
EPG5000
Unplug your modem
Disconnect your cable or DSL modem or remove
the power adapter.
Connect your Ethernet cable
Plug one end of the included Ethernet cable into
the WAN port on the back of your gateway. Plug
the other end of the Ethernet cable into the
Ethernet port of your modem.
Connect the power adapter
Connect the power adapter again with your cable or DSL modem and plug it
into the outlet. Connect the power adapter to your gateway and plug it into the
outlet. Wait for two minutes.
Wi- Fi name and password
Consult before the Wi-Fi name and password. These are located on the bottom
of the gateway. Continue on to the next step.
Connect to Wi- Fi
Open the wireless settings on your PC, Mac or mobile device and connect to
your network (Wi-Fi name).
Setup
1. Open a web browser on your computer or mobile device.
Type “ 192.168.0.1 “ in the web browser.
2. Follow the steps in the installation wizard to complete the installation.
If you want to skip the wizard, choose “ Network settings “ at the bottom.
3. Enter the user name and password to continue logging.
The default value for this is admin.