Unexpected start-up, improper tags, residual energy and a lot more & much worse can happen when LOTO systems fail. Needless to say, an ideal LOTO procedure is an absolute must to save the life & limbs of your workers, as well as safeguard resources. So what makes for ideal steps of a LOTO procedure? Let's check them out #loto #energy #safety #elearning

1. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved.
Lock it down, Tag it up & create a Safe Workplace

2. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved.
o "Locking" down safety in the workplace
doesn't have to be a "key" issue!
o In fact, it's as easy as following the
"LOTO" procedure to keep yourself and
your coworkers safe.
2
So, let's "bolt" down and take a closer look
at the steps of an ideal LOTO procedure.

3. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 3
o Identify the equipment to be serviced
o Notify all affected employees
o Obtain the necessary tools and
equipment
o Identify and review the specific LOTO
procedure for the asset

4. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 4
o Identify all energy sources
o Identify all LOTO devices needed
o Determine the sequence of steps for the
LOTO procedure

5. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 5
o Shut down the equipment using the
correct procedures
o Follow any specific instructions for the
equipment

6. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 6
o Identify and locate all energy sources
o Follow the LOTO procedure to
disconnect each energy source

7. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 7
o Install locks and tags on
each energy source
o Ensure that the locks and
tags are properly labeled
and identifiable

8. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 8
o Release or block any stored energy in the
equipment
o Follow the specific LOTO procedure for
the equipment

9. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 9
o Verify that all energy sources are
disconnected and locked out
o Verify that all stored energy has been
released or blocked
o Verify that the equipment is in a safe
condition to work on

10. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 10
o Perform any scheduled servicing or
maintenance on the equipment
o Follow the specific procedures for the
equipment

11. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 11
o Remove all locks and tags from the
equipment
o Follow the specific procedures for
restoring the equipment to service
o Notify affected employees that the
equipment is back in service

12. © 2023 ASK-EHS Engineering & Consultants. All Rights Reserved. 12
LOTO procedures are critical to ensuring the
safety of employees who work on or near
equipment
Following the steps of an ideal LOTO procedure
can help prevent accidents and injuries
Always follow specific procedures for each piece
of equipment to ensure that the LOTO procedure
is done correctly

13. Any material or information contained in this document represents the proprietary information of ASK EHS Engineering & Consultants
The sole purpose is to present the value proposition. This information shall not be disclosed, duplicated or used for any other purpose.
https://www.ask-ehs.com/elearning/
Your E-learning Story Starts Here
Press the button. Make the call. Transform your trainings.
COMMUNICATION & LEARNING FOR RELIABLE OCCUPATIONAL SAFETY AND HEALTH BY ASK-EHS