2. Is a subsidiary of Access Group of companies which
is highly reputed company both locally and
internationally and established on year
2001 to fulfill the needs of quality drinking water
sourced from Sri Lankan natural water springs with
meeting international standards
Access Natural Water (pvt) Ltd
3. Mission
Our purpose of existence is to bridge the nature to
human life while increasing share holder value by
providing sustainable innovative solutions from
nature for a healthier life while adhering to norms and
standards .
Vision
Be the company of choice that enhances
healthy living through nature’s resources
4. Drinking Water is a basic need and the
water should be
- Clean
- Uncontaminated
5. We extract the main source from the natural springs that
sprout from Labugamkanda Mountain
We have our own factory which is located in Padukka an
isolated area which surrounded natural rain forests .
Source of our company is straight from the nature and its
untouched any human/animal activity
7. Aerator Purification
Water breaks in to drops and those drops are mixed with
Oxygen and naturally purified .
The PH value of the water should maintain 6.5 PH – 8.5
Aqua fresh maintain 7ph – 7.5ph under the SLS 8,9,4 2008 standards
9. Advantages of using Biological purification system
No chemical involvement in the process
PH rate is to the optimum level like between 7 – 7.5 ph
Eliminate unwanted gasses like Co2 & H2S
Eliminate unwanted chemicals like Fe
Mineral percentage will balance
Remove large & small particles by using micro filters
11. Micron Filters
Water which gathered to the main sump comes to the storage tanks and those
water filtering through Micron filters .
Micron filter is removing the particles of the water .
• There are 3 micron filters for each production
Micron10
Micron5
Netfilterabove1-.0.5
12. UV sterilization
• UV rays help to change the DNA & RNA characters of bacteria if there is any
present .
• There fore it helps to avoid regeneration of any organism and this water is
absolutely free of bacteria .
• The factory supervisor should have to check the machine for every 30
minutes
Process going smoothly Something is wrong STOP production
13. Now the Aqua Fresh water is ready to fill
the PC & PET bottles
“Aqua fresh Water”
Simply It’s natural, superior quality, clean
and healthier as it’s totally free of
chemicals.
14. .PC remains Poly Carbonate
.These bottles can recycle and
reuse
.Capacity of the bottle 18.9L /
5 Gallon
PC Bottles
15. PC Bottle Production
Categorizing bottles
• Stain bottles
• Damage bottles
• Smell bottles
• Good bottles
Good bottles are ready for the normal production and the other
bottles should have to clean and repair .
16. Water filling process
Step one :
Manually bottom rings separate from
bottle
De capper the bottles
Nobs & Blue tops washed by Chlorine
water
• We use < 250ppm chlorine
Step two :
Outer washing by using the chlorine <
250ppm .
Step three :
Internal Washing process
Step four :
Filling the water to the cleaned bottles
Step five
Set nob and the cap of the bottle
Step six :
Inspection – Each and every bottle
of the production will be checked
There are 2 inspections
• White area inspection to
identify black particles
• Black area inspection to
identify white particles
Step seven :
Rapping and pasting the safety
seal . In this safety seal it
mentioned Batch no. /
Manufacturing date / Expiry
date
Step eight :
Production finish
bottles are kept in
washed bottom rings
& are ready to
deliver .
Per hour 600 bottles
manufacturing
17. Internal Washing process
Bottle 01 Bottle 02 Bottle 03 Bottle 04
UNIT02
UNIT03
Chemical Washing by
using 250 ppm
Chlorine
Each bottle wash 4
times
Hot water washing
Maintaining 65 C Each
bottle wash 4 times
Wash 4 tomes per
bottle
UV washing
Wash using Aqua
fresh water
Each bottle wash 2
times
UNIT02
UNIT03
Chemical Washing by
using 250 ppm
Chlorine
Each bottle wash 4
times
Hot water washing
Maintaining 65 C Each
bottle wash 4 times
Wash 4 tomes per
bottle
UV washing
Wash using Aqua
fresh water
Each bottle wash 2
times
Chemical Washing by
using 250 ppm
Chlorine
Each bottle wash 4
times
Chemical Washing by
using 250 ppm
Chlorine
Each bottle wash 4
times
UNIT02
UNIT02
UNIT03
UNIT
03
Hot water washing
Maintaining 65 C Each
bottle wash 4 times
Wash 4 tomes per
bottle
Hot water washing
Maintaining 65 C Each
bottle wash 4 times
Wash 4 tomes per
bottle
UV washing
Wash using Aqua
fresh water
Each bottle wash 2
times
UV washing
Wash using Aqua
fresh water
Each bottle wash 2
times
18. Damaged bottles repairing
Categoriz
ed
damaged
bottles &
past a red
label
Put those
bottles in
to a tank
which is
filled with
water &
air
Identify
damage
place
through
the air
bubbles
And past a
label on
the
damage
place
Send those
bottles to
the repair
unit for
repairing.
Repairs do
by using
the PC
material
Sending
the
repaired
bottles to
the normal
washing
process
19. PET Bottles
.PET remains Polyethylene
Terephthalate
.These bottles can recycle but
cannot reuse
.There are 2 brands as
Premium & Classic
. Wall particles are unleashing
and they are carcinogen
Premium Brand
350 ml
500 ml
750 ml
1000 ml
1500 ml
Classic
500 ml
1500 ml
5 L
20. Wrapped and packed the bottles in the cartoons
Per hour 2500 bottles manufacturing
Top lid fix manually & Printing the details – Batch No / Manf. Date / Exp. Date
Bottles are steamed to get attaché the label to the bottle
Manually past the bottle label
Bottles inspection through a white backgrounds to identify particles / Responsible person should
check the one bottle each for six bottles
Bottle cap is fit with the bottle
Filling the water to clean bottles
Washing the import bottles by using Chlorine water
Molding the bottle shape / Currently we are importing the PET bottles
PET bottles production process
21. Lab Testing
Physical Testing
Chemical Testing
Biological Testing
Testing the taste and the smell of the water .
Water doesn’t have a color test or smell
This test is doing to check weather water have any electricity
conductivity
Testing APC – Aerobic Plate counter and Coliform bacteria
presents in the water
Daily we are checking the water which gets from 18 check points before the production
Out side Testing parties
ITI – Once a year for tube water & Twice a year for finishing water
MRI – Biological testing once a month
22. Quality standards that we have …
SLS Certification : Aqua fresh was the first in the island to receive the SLS 894 certificate for 5
gallon bottle
ISO 9001 : 2008 : Certification for quality management system in Aqua fresh
ISO 22000:2005 : Certification for Food safety management system in Aqua fresh
HACCP : Certification for the The Hazard Analysis Critical Control Points System
U.S.FDA : Aqua fresh was registered with United states Food and Drug Administration
Registered on Health Ministry
23. Place where we taken the water - we extract water from natural
springs .
It's originally pure and not affected from pathogenic bacteria.
Its purified through a natural purification system.
We are using the Poly Carbonate bottles to store water .
Product purified filled & sealed at source .
Branded covered vehicles
We locally & internationally certified for drinking water
Why customers must consume us ?
