1. Dr. Sandeep Tiwari
(Director)
Global Institute of Management and Technology, Gurgaon
(21 Years of Proven record in Academics and Industry)
Mobile: +91 9891460727, +91 941542948,
E-mail: sandeeptiwari1970@gmail.com
DOB: 26 April1971,
Passport Number: L1906241 valid till 07/07/2023
Address: C-402, Peach Palm, Omaxe Palm Green, Sector: MU, Greater Noida
PROFESSIONAL SUMMARY
Dr. Sandeep Tiwari has a total of twenty one years experience in academics and industry,
which includes his hands on experience as Director, Head of the Department, Professor and
Engineer. For Sixteen years he has been in the teaching profession and for five years he holds
industrial experience.
He has been holding important positions at various institutes. He joined Accurate Institute of
Management and Technology as the Professor and Head of Mechanical Engineering and at the
completion of 1 year he progressed to the position of Director. He then spent 2 years at Accurate
as the Director Engineering and Director Research. Prior to this, he has also been the
Professor and Head for the Mechanical Engineering Department at College of Engineering and
Technology, IILM-AHL. Prior to this he has worked as Associate Professor, Assistant Professor
and Reader at various Engineering Institutes.
As part of his Industrial experience, Dr. Sandeep Tiwari has worked as a Production Engineer
at Tribhuvan Steel Industries Limited. Prior to this he worked as a Production Engineer with
Subhash Projects and Marketing Limited.
With excellent subject knowledge, his knowledge as an academician is honed with his industrial
expertise of working in the industry for initial 5 years of his career.
He holds a PhD degree in the field of Mechanical Engineering from Uttar Pradesh Technical
University whereas research has been carried out at Indian Institute of Technology (BHU),
Varanasi. He also holds Master of Engineering from Indian Institute of Technology, Roorkee
and Bachelor of Engineering from Karnataka University, Dharwad and Executive MBA. Along
with this, he holds many publications in national and international journals and conferences
under his name.

2. With this vast academic record, academic experience and industry experience, time and again, he
is conferred various significant roles such as the head examiner and observer by various
government examination bodies.
EMPLOYMENT HISTORY
ACADEMIC EXPERIENCE
Institute Designation Duration
Global Institute of
management and Technology,
Gurgaon
Director September 23, 2015
onwards
Amity School of Engineering,
Amity University, Noida,
Uttar Pradesh, India
Professor, Mechanical and
Automation Engineering
March19, 2014—Till
date
(On Leave from
Sept.23, 2015)
Accurate Institute of
Management and Technology,
Greater Noida
Director Research and Professor in
Mechanical Engineering Jan 2013 – Mar 2014
Accurate Institute of
Management and Technology,
Greater Noida
Director and Professor in Mechanical
Engineering Department Sep 2011 – Jan 2013
Accurate Institute of
Management and Technology,
Greater Noida
Professor and Head of Mechanical
Engineering Department Mar 2010 – Sep 2011
College of Engineering and
Technology, IILM-AHL,
Greater Noida
Professor and Head of Mechanical
Engineering Department Oct 2009 – Mar 2010
Accurate Institute of
Management and Technology,
Greater Noida
Associate Professor and Head of
Mechanical Engineering Department July 2008 – Oct 2009
G.L.A. Institute of Technology
and Management”, Mathura
Reader in Department of Mechanical
Engineering Jan 2007 – July 2008
Azad Institute of Engineering
and Technology”, Lucknow
Assistant Professor in Department of
Mechanical Engineering July 2003 – Jan 2007
Azad Institute of Engineering
and Technology”, Lucknow
Lecturer and Senior Lecturer in
Department of Mechanical Engineering June 2000 – June-2003

3. INDUSTRIAL EXPERIENCE
Organization Designation Duration Responsibilities
Tribhuvan Steel
Industries
Limited
Production
Engineer
April 1998 –
May 2000
I was reporting to General Manager
(Production) and my key responsibilities
were production, heat treatment, finishing,
inspection, testing and dispatch.
Subhash Project
and Marketing
Limited, New
Delhi
Mechanical
Engineer
Jan 1994 –
May 1996
Reported directly to Vice-President
(Planning). I was an active member of the
team, visited Chamoli (Uttaranchal) for the
site selection of the 6 MW hydroelectric
stations and also a part of the group, which
was responsible for technical collaboration
with foreign concerns.
AREAS OF EXPERTISE IN ADMINISTRATION
 Director in Global Institute of management and Technology, Gurgaon, Haryana.
 Director Research in Accurate Institute of Management and Technology, Greater Noida,
Uttar Pradesh.
 Director in Accurate Institute of Management and Technology, Greater Noida, Uttar
Pradesh.
 Head of Department in Accurate Institute of Management and Technology, Greater Noida,
Uttar Pradesh.
 Appointed as Observer in State Entrance Examination by Uttar Pradesh Technical
University (U.P.T.U.), Lucknow, Uttar Pradesh.
 Appointed as Head Examiner for Evaluation by Uttar Pradesh Technical University
(UPTU), Lucknow, Uttar Pradesh.
 Group Leader, Greater Noida, End Semester Examination by Uttar Pradesh Technical
University (U.P.T.U.), Lucknow, Uttar Pradesh.
 Appointed as Observer in End Semester Examination by Mahamaya Technical University
(MTU), Noida, Uttar Pradesh.
 Project In charge in GLA Institute of Technology and Management, Mathura, Uttar
Pradesh.
 Assistant Proctor from July 2003 to June 2005 in Azad Institute of Engineering and
Technology, Lucknow, Uttar Pradesh.

4.  Member of the Disciplinary Committee in Azad Institute of Engineering and Technology,
Lucknow, Uttar Pradesh.
 Member of the Anti-Ragging Committee in Azad Institute of Engineering and Technology,
Lucknow, Uttar Pradesh.
TECHNICAL QUALIFICATION
Ph.D. IN MECHANICAL ENGINEERING
Awarded in 2011 (Thesis submitted in May 2010), from Uttar Pradesh Technical University,
Lucknow
Research Place: Indian Institute of Technology-BHU, Varanasi, Uttar Pradesh, India.
Title – Strategic Approach for Environmentally Conscious Traditional Machining by Effective
Coolant Disposal.
Guides: Prof. P.C. Pandey, Emeritus Indian Institute of Technology, Kanpur, Former Prof. and
Head (Mechanical and Industrial Engineering Deptt. University of Roorkee), Roorkee.
Prof. Harvendra Singh, Former Director, Bundelkhand Institute of Engineering and
Technology, Jhanshi
MASTER OF ENGINEERING
Master of Engineering from University of Roorkee (Now Indian Institute of Technology),
Roorkee in 1998 and secured First division.
ENGINEERING
Bachelor of Engineering (Mechanical Engineering) from Karnataka University, Dharwad in 1993
and secured First division.
PARTICIPATION IN TECHNICAL PROGRAMS
 Participated in a two months Continuing Education Program on “Advanced
Manufacturing” (21st May-20th July 2001) sponsored by All India Council for Technical
Education and organized by Department of Mechanical, Indian Institute of Technology,
Kharagpur. This program consisted of six exhaustive modules (each module equivalent to full

5. semester course) related to latest trends and recent development in advance manufacturing. I
have been rated Excellent in the program.
 Attended four-week Industrial Program in “Kirloskar Limited”, Hubli, Karnataka, which
involved manufacturing automatic Lathes and special purpose machines.
 Attended a short term training Program on ‘Improving Industry Institute Interaction’
conducted by the EDIC Department, National Institute of Technical Teachers Training and
Research (NITTTR), Chandigarh.
 Attended a short term program on, “System Thinking and System Dynamics” organized
by Department of Mechanical, I.T.BHU(Now I.I.T.-BHU), Varanasi
 Attended one month Training in “Haryana State Industrial Development Corporation”,
Faridabad, Haryana, to set-up own Industry.
 Entrepreneurship Development Amity University, Noida May 05-20, 2014
(Two week).
 International workshop on Transportation and safety, Indian Institute of Technology,
New Delhi, Nov. 30-Dec. 08, 2014 (Two week ).
 Workshop on “Awareness of Intellectual Property Rights” in association with Department
of Electronics and Information Technology (DeitY, Delhi) on 25th- 26th June,2015 at Amity
University, Noida, Uttar Pradesh, India.
PAPER PUBLICATIONS
INTERNATIONAL JOURNALS
1. Tiwari S. et.al., A Multi-Criteria Approach for the Selection and Grading of Adsorbent
Materials for the Removal of Oil from Spent Cutting Fluids, International Journal of
Physical Sciences, Volume 21 (1), Page 85-98, 2009.
2. Tiwari S. et.al., Adsorption Chemistry of Oil-In-Water Emulsion From Spent Oil Based
Cutting Fluids Using Sawdust of Mangifera Indica, Journal International of
Environmental Application and Science, Volume 4 (1), Page 99-107, 2009.

6. 3. Tiwari S. et.al., A Comparative Study of the Performance Behaviour of Adsorbent
Materials Used for the Treatment of Spent Cutting Fluids, International Journal of
Environmental Technology and Management, Volume 13, 2010.
4. Tiwari S. et.al., Adsorption of Emulsified Oil From Spent Metal Working Fluid Using
Agro-Waste Of Cajanus- Cazan, International Journal of Environmental Technology and
Management, Volume 14, No.1-4, Page 115-131, 2011.
5. Srivastava. A ,Dixit. A.R., Tiwari. S, Experimental Investigation of Wire EDM Process
Parameteres on Aluminium Metal Matrix Composite Al2024/SiC, International Journal of
Advance Research and Innovation, Volume 2 (2014) 511-515.
6. Madheshiya S., Srivastava. A , Dixit. A.R., Tiwari. S, A Review on Fabrication and
Characterization of Composite Material and its Buckling Analysis through FEM,
International Journal of Advance Research and Innovation, Volume 2, issue 1, (2014)
185-193.
7. Srivastava. A ,Dixit. A.R., Tiwari. S, A Review on Fabrication and Characterization of
Aluminium Metal, Matrix Composite (AMMC), International Journal of Advance
Research and Innovation, Volume 2 (2014) 516-521.
8. Experimental Studies of Heat Transfer and Pressure Drop Characteristics of Nanofluids
Under Turbulent Flow Regime, International Journal of Engineering and Science, ISSN
2348-3300, Page 05-27, January 2014.
9. Tiwari S.,Tiwari A.K.,2015,Thermophysical properties of various nanofluids:
Measurement and comparison, Applied Thermal Engineering (Under review), Publisher:
Elsevier (SCI). Impact factor: 2.739, 5-year Impact factor: 3.034.
10. Tiwari S., Tiwari A.K., 2015,Particle concentration levels of various nanofluids in heat
exchanger for best performance, International Journal of Heat and Mass Transfer (Under
review), Publisher: Elsevier Science (SCI). Impact factor: 2.383, 5-year Impact
factor: 2.809.
11. Sharma S, Tiwari A.K., Tiwari S., Prakash, R., 2015, Viscosity of Hybrid Nanofluids:
Measurement and Comparison, Energy Conversion and Management (Under review),
Publisher: Elsevier (SCI). Impact factor: 4.380, 5-year Impact factor: 4.512.
12. TVR Sekhar Tiwari S., Sharma S, Tiwari A.K., 2015, Performance Enhancement of
Solar Collectors: A Review, Energy Conversion and Management (Under review),
Publisher: Elsevier (SCI). Impact factor: 4.380, 5-year Impact factor: 4.512.
13. TVR Sekhar Sharma S, Tiwari S., Tiwari A.K., 2015,Investigations on Hybrid
Nanofluids: A Review, Energy Conversion and Management (Under review), Publisher:
Elsevier (SCI). Impact factor: 4.380, 5-year Impact factor: 4.512.

7. 14. Srivastava. A , Dixit. A.R., Tiwari. S, Investigation of Microstructural and Mechanical
Properties of Metal Matrix Composite A359/B4C through Electromagnetic Stir Casting,
Indian Journal of Engineering and Materials Sciences (IJEMS) (2014 onwards Under
review), (SCI). Impact factor: 0.65.
15. Srivastava. A, Dixit. A.R., Tiwari. S, Parametric optimization of Wire-EDM on in-situ
hybrid composite using Taguchi’s and Grey-relation analysis, De-gryuter’s Science and
Engineering of composite materials (SECM) (Under review), (SCI). Impact factor: 0.5.
16. Srivastava. A ,Dixit. A.R., Tiwari. S, A review on intensification of Metal matric
composite and its machining, De-gryuter’s Science and Engineering of Composite
Materials, (SECM) (Under review), (SCI). Impact factor: 0.5.0
INTERNATIONAL CONFERENCE
17. Tiwari. S. et.al., Applicability of Freundlich and Langmuir Model In the Removal of
Emulsified Oil, International Conference on Separation Processes, Chemical Engineering
Department, Institute of Technology (Banaras Hindu University), Varanasi, October 20-
22, 2009.
18. Tiwari. S. et.al, Eco-Friendly Disposal Of Spent Cutting Fluid, International Conference
On Challenges And Strategies For Sustainable Energy, Efficiency And Environment,
Organized By Uttar Pradesh Technical University, Lucknow, June 10-11, 2006.
19. Tiwari. S. et.al, Applications of Recycling, International Conference organized by Asian
Oceania Geosciences Society (A.O.G.S.) / Asia Pacific Association of Hydrology and
Water Resources (APHW), Singapore, July 5-9, 2004.
20. Srivastava. A, Dixit. A.R., Tiwari. S, Parametric optimization of Wire-EDM on in-situ
hybrid composite using Taguchi’s and Grey-relation analysis, International Conference
on Technological Advancements in Materials and Manufacturing for Industrial
Environment, Jointly organized by KPRIET, Coimbatore and Mokpo National University,
South Korea (Accepted).
21. Tiwari S Process Capability Analysis for Quality Improvement and Calculation of
Taguchi Capability Index, National Conference of Advanced Manufacturing and Robotics
(AMR 2004), Central Mechanical Engineering Research Institute, Durgapur, 10-11
January 2004.

8. NATIONAL CONFERENCE
22. Tiwari S Engineering Tolerances and Functional Tolerance Design For Assembly,
National Conference Of Advanced Manufacturing and Robotics (AMR 2004), Central
Mechanical Engineering Research Institute, Durgapur, 10-11 January2004.
23. Tiwari S Eco-Friendly Disposal of Spent Cutting Fluids Using Agro Wastes, National
Conference on Recent Advances in Mechanical and Productive Engineering (RAMP-
2009), College of Technology, Govind Ballabh Pant University of Agriculture and
Technology, Pantnagar, February 12-14, 2009.
24. Tiwari S Theoretical Analysis of Swing Jaw Plates Used In Heat Exchanger, Workshop
on Advances In Energy, Engineering and Technology (WAEET2013), Indian Institute of
Technology (Banaras Hindu University), Varanasi, June 28-30, 2013.
25. Tiwari S Characteristics of Walter’s B Visco-Elastic Nanofluid Layer, Workshop on
Advances In Energy, Engineering and Technology (WAEET2013), Indian Institute of
Technology (Banaras Hindu University), Varanasi, June 28-30, 2013.
AS AN ACADEMICIAN PAR EXCELLENCE:
16 yrs of experience in different reputed institutions such as Amity School of Engineering
and Technology, Amity University, Noida (UP), Accurate Institute of Management and
Technology , Greater Noida, G.L.A. Institute of Technology and Management ,Mathura ,
to quote a few. Awarded letters of appreciation for academic excellence and performance
par excellence consecutively for two years in G.L.A. Institute of Technology and
Management ,Mathura.
ADMINISTRATIVE ACUMEN:
Left an indelible in print of Administrative Acumen as Director Research, Director and
Professor and HOD at Accurate Institute, Professor and HOD at IILM-AHL, Greater
Noida.
Won Kudos and Accolades as Production Engineer for spectacular growth in Production
in Tribhuvan Steel Industries Limited, Lucknow and Subhash Projects and Marketing
Limited, New Delhi.

9. AS A RESEARCHER:
 Reviewer of the the 3rd Global Conference on Materials Science and Engineering
(CMSE 2014), which will be held 0n Oct. 20- 22, Shanghai, the economic centre of
China and all accepted papers and abstracts published in ISI indexed journals.
 Reviewer of the 4th Global Conference on Materials Science and Engineering (CMSE
2015) ,August 3-6, 2015, Macau, papers related to strength and mechanical engineering
published in Vol. 47, No.1, 2015 of one Springer Journal Strength of Materials in April,
2015, and indexed by Science Citation Index already in May, 2015.
 Reviewer for the journal “Indian Journal of Science and Technology”.
 Published more than a dozen papers in International Journals.
 Communicated 08 papers in International journals mostly in Elsevier with good impact
factor.
 Presented research papers in International and National Conferences.
 Presently guiding and supervising 4 research scholars.
 Research areas and expertise includes
 Nano-fluids and its applications in heat transfer devices like Heat Exchangers etc.
 Industrial Engineering and development of economical and eco-friendly waste
disposal systems
 Composite development and its application
 Green Manufacturing
REFERENCES
Prof. P.C.Pandey
Former Professor and Head,
Mech.and Ind. Engg. Deptt.,
University of Roorkee now I.I.T.,
3/149, Vinay khand, Gomti Nagar,
Lucknow-226010 Uttar Pradesh, India
Mobile: +91 94155 81955, 0522-239 1184
Prof. Harvendra Singh
Former Director, Bundelkhand Institute of
Engineering and Technology (BIET), Jhansi,
Uttar Pradesh, India
Mobile No.: +91 94153 59102
Prof. (Dr.) S.N.Gupta
Former Professor and Head,
Mechanical Engineering Department,
Institute of Technology-BHU now Indian
Institute of Technology, Varanasi,
Uttar Pradesh, India
Mobile: +91 9415619561, 9718492002
Prof. (Dr.) J.K.Sharma,
Former Prof. FMS, New Delhi
Amity Business School,
Amity University, Noida
Mobile No.: +91 09810068510