During 3D printing workshop we do an overview how 3D printers work, what technologies are used today for 3D printing and which materials we can use. We are going to review how to prototype, design and produce objects using 3D printers. One of the most important aspects is how you design models for 3D printing. Finally, at the end of the workshop participants can print out their models using 3D printer. About the company: ITBS Secured3D is an enterprise security company that offers cloud 3D printing solutions. To protect copyright of Designers and Enterprises we securely store and stream 3D models directly to 3D printers without exposing originals. Our product is becoming a standard, has detective and protective controls, B2B focused, fully ready and selling. Our solution is validated by the top 3D printer manufacturers.

1. Please take a laptop!
//TODO: I think we started 10:20
15 Minute Pause
Next Step
WORKSHOP

2. WORKSHOP
PREPARE TO LEARN
ITBS
Juri Tishko
Ivan Gaydamakin

4. ● I will show, how to use FreeCad and how to
create a 3D model
● You will learn how to create a 3D model in
FreeCad
● Slicing model with MakerWare
● PRINT IT!
What are we going to do today?

5. FreeCad
//TODO: Now I will show, how to use
FreeCad…
FreeCad
v0.14
http://goo.g
l/XQftga

6. FreeCad again...
Now it’s your turn,
use a tutorial!
If you have question,
feel free to Ask!
Max. time = 3 hours!
Try yourself in a 3D modeling
And get a reward! :)
Tutorial
http://goo.
gl/1uOfE0
FreeCad
v0.14
http://goo.g
l/XQftga

7. 1 hour left
Please ask, if you don`t understand, what
are you doing!

8. Don`t Worry!
TIME LEFT!
http://goo.gl/0IUnP1

9. Next Step…
Now we are going to export your model to STL

10. MakerWare
http://goo.
gl/BVBVtk

11. MakerWare
//TODO: Now we run a MakerWare and will
slice our model...

12. PRINT IT
//TODO: Now please write in Paper you Emails
OR send you email to: ivan@itbsg.eu.
ivan@itbsg.eu

13. While Printing…
Recommendation For Create Models
1. Angles
2. Sizes
3. Supports
4. Correct place on printing bed

14. While Printing… Again!
Recomendation for Printer:
1. Why use Black Taft?
2. Buy only high quality plastic
3. More steps to increase print quality.

15. Nozzle clogging because bad plastic

17. Nozzle realy clogged!

18. Охлажение

19. No Cooling

20. What can printer? Examples…

21. 70 Hours - 1,5kg plastic!

23. Where buy Plastic
www.ebay.com
www.aliexpress.com
www.plastic2print.com
www.makerpood.ee
Or ITBS: plastic@itbsg.eu

24. Have printer? Не бойся Играться с
Ним!

25. NOW YOU PREPAIRED!
FOR CREATE OWN MODELS!
Thanks for WorkShop!
If you have Questions, you can contact:
Ivan Gaydamakin (3D Printers)
Skype: ivan6335523
E-mail: ivan@itbsg.eu
Juri Tishko (Software)
Skype: juri.tishko
Email: juri@itbsg.eu