Section 5 - Playground Equipment

www.hahnplastics.com
CATALOGUE 2017
FINISHED PARTS · PROFILES · SYSTEMS
hanit®
Recycled Products
THE CLEVER SOLUTION
KMPALGEN1216
HAHN Kunststoffe GmbH has been
certified and authorised to use the
“Blue Angel”eco-label since 2005.
CATALOGUE2017
YE
AR
WARRAN
TY
H
AHN PLASTI
CS
HAHN Plastics Ltd.
Old Pilkington Tiles Site
Rake Lane Swinton
Greater Manchester M27 8LJ
+44(0)161 850 1965
+44(0)161 850 1975
info@hahnplastics.co.uk
HAHN Plastics (North America) Ltd.
180 Northfield Drive West
Unit 4
Waterloo, ON N2L 0C7
Canada
+1(226)444-6779
info@hahnplastics.com
www.hahnplastics.ca
HAHN Kunststoffe GmbH
Gebäude 1027
55483 Hahn-Flughafen
+49(0)6543 9886-10
+49(0)6543 9886-99
info@hahnkunststoffe.de
www.hahnkunststoffe.de
HAHN France SAS
27 Rue de Sarre
57070 Metz, France
+33(0)387575710
+33(0)9 70 06 88 88
contact@hahnfrance.fr
www.hahnfrance.fr

MIXED TO
PERFECTION
O U R Q U E S T F O R Q U A L I T Y
A good chef knows that a successful dish is more than the sum
of its ingredients. The dish should bring out the best in each
ingredient, strike a balance between flavours and create something
special.
The same applies to recycled plastic. You can’t just mix any old
rubbish. Getting the ingredients right is crucial. Getting it wrong is
not an option.
There are no quick ways to become an expert. Over many years,
our engineers have found the best possible formulations and
developed materials with the highest specifications.
All of our plastics have been developed with specific functions in
mind. For example, a child’s sandbox needs to be different to a
paddock rail.
It’s also important that we manufacture all our products and raw
materials ourselves. It’s the only way to be sure that our standards
are met and our formulations are correct. As a result, our products
are only made in Germany and the UK under strict control.
The right ingredients, tested formulations and strict quality
control: we’ve been following these principles since we started in
1993. They are the backbone of the company and they enable us
to innovate, develop and bring products of the highest quality to
market.
243For more information » www.hahnplastics.com2 HAHN Plastics Ltd. » +44 (0) 161 850 1965

CONTENTS
Index��4
Company��6
Facts & Figures��8
Environment & Recycling��11
The hanit®
product ��12
Technical excellence��18
Processing guidelines�� 236
01
02
03
04
05
06
» Palisades
» U-profiles
» Beams/Sleepers
» L-stones/Stones
» Boundary stones
» Kerbs
» Square profiles
» Standard panels
» Amphibian protection
» Tunnelling protection
» Cable protection panel
» Boards
» Posts
» X-profile stakes
» Bollards
» Picket fence panels
and pickets
» Privacy fencing
» Paddock rails
» Rail systems
» Barriers
» Dock planks
» Driven piles
» Patio flooring panels
» Paddock mats
» Hanpave
» Lawn chequer bricks
» Eco-weave
» Mobile terrain panels
» Cable duct cover plates
» Weed control plates
» Benches
» Tables
» Bench planks
» Planter
» Raised bed
» Round herb planter
» Composters
» Rubbish bins
» Accessories
» Kids’ benches
» Kids’ tables
» Sandboxes
» U-profiles
» Mud tables
» Raised beds
» Cable duct cover plates
» Cable ducts
» Warehousing & Logistics
» Ventilation systems
BUILDING AND
CONSTRUCTION
FENCING AND
BARRIERS
GROUNDWORK
AND SURFACES
OUTDOOR SPACES
AND FURNITURE
PLAYGROUND
FURNITURE
PROJECT
REALISATION
FROM PAGE 74
FROM PAGE 196
FROM PAGE 60
FROM PAGE 188
FROM PAGE 42
FROM PAGE 176
FROM PAGE 20
FROM PAGE 160
FROM PAGE 132
FROM PAGE 228
FROM PAGE 150
FROM PAGE 234
For more information go to » www.hahnplastics.com 3

INDEX
A
Algarve bench 101 209
Alton bench 96 204
Alton bench without back 96 204
Alton set 83 197
Alton table 110 213
Amphibian guard 33 171
Armrest 123 221
B
Bank reinforcement 33 171
Barriers 58-59 187
Base plate 51 181
Bavaria bench 95 204
Bavaria set 79 196
Beams 27 167
Bearing supports 155
Bench and table sets 76-85 196-198
Bench boards 120-122 218-220
Bench board element 122 220-221
Bench planks 120-122 218-219
Benches 86-107
112-123
198-211
214-221
Board profiles,
tounge & groove
37-40 174-175
Boards 34-40 172-175
Boardwalk,
boardwalk boards
62-68 188-192
Bollards 48-51 180-181
Boundary stone 29 168
Burrowing barrier 33 171
C-D
Cable duct 153
Cable duct cover plate 73, 152 195
Cable protection cover 33 171
Calero bench 94 202
Calero set 80-81 197
Calero table 109 212
Canetti bench 93 202
Canetti children‘s bench 134 228
Caserta bench 96 205
Cemetery composters 129 225
Collec litter bin 130 226
Collision protection 157
Collodi skater bench 105 211
Composters 129 225
Cornwall bench 97 205
Cross-profile stake 47 179
Curb stone 29 168
Decking 69 192
Docks, dock planking 62-68 188-192
Driven piles 66 191
E-F
Eclipse bench 92 202
Eco slab 72 194
Eifel bench 98 207
Eifel bench without back 99 207
Eifel set 84 198
Eifel table 111 214
Eldorado sun lounger 106-107 211
Exclusive products
custom-made
152-159
Fence posts 53-54 183-184
Footpath planks 62-69 188-192
Forio children‘s set 138 229
G
Garden benches 86-107
112-123
198-211
214-221
Gatton round bench 116 216
Gobi sandbox 144 231
Grand Canyon bench 116 216
Grass-inhibitor plates 73 195
Ground anchors 123 221
Ground covering systems 70-72 192-194
H-J
Hanpave 71 193
Heavy-duty ground grid 72 194
Hexagonal base plate 70-71 192-193
Highlands bench 97 206
Hyde Park bench 90 200
Hyde Park bench
extension module
91 201
HydePark bench
without back
90 201
Hyde Park bench
connection module
91 201
Hyde Park set 77 196
Hyde Park table 110 212
Iberis planter 127 223
Interlocking palisades 22-23 160 -163
Iona bench 118 217
Isola set 114 215
K-L
Kalahari sandbox 145 231
Kids’ benches 134-138 228-229
L-stones 28 167
Lawn chequer bricks 72 194
Litter bins 130-131 226-227
Lut sandbox 146 232
Lounger 106-107 211
M-O
Mira bench 94 203
Mira children‘s bench 136 228
Mira children‘s table 137 229
Mira table 110 213
Mobile terrain panel 72 194
Modular composter 129 225
Mojave sandbox 142 230
Mud table 148 233
Muscari planter 124-125 222
Namib sandbox 143 230
HAHN Plastics Ltd. » +44 (0) 161 850 1965
hanit® Recycled Products
THE CLEVER SOLUTION
4

Ogee palisade 22-23 160-163
Opeka forest bench 99 207
Open mesh panels 158
P-Q
Pales 53-54 183-184
Paddock post, round 44-45 176 -178
Paddock post, square 46 178 -179
Paddock rails 56 186
Paddock slab 70 192
Palisades 22-25 160-166
Panels 32 170
Park benches 86-107
112-123
198-211
214-221
Park tables 109-116 211-216
Pasture posts 44-47 176-179
Patio flooring 69 192
Piccadilly bench 89 200
Picket fence panel 52 182
Pickets 53-54 183-184
Piles 66 191
Planters 124-129
149
222-225
233
Playgrounds 140-149 230-233
Posts 44-46 176-179
Posts, reinforced 44-46 178
Prato bench 99 208
Privacy fencing 55 185
Provence bench 100 208
Provence bench
without back
101 208
Provence set 82 197
Provence table 111 214
R
Rails 56-57 186
Raised beds 129
149
225
233
Rectangular palisades 25 166
Rectangular profiles 30-31
34-36
169-170
172-174
Reflectors 51 181
Reinforced posts 45-46 178
Resco litter bin 130 226
Riffleded planks 62-69 188-192
Roncade round bench 116 216
Round benches 116-118 216-217
Round palisades 24 164-165
Round posts 44-45 176-178
Round posts, with point 44-45
66
176 -178
191
S
Sahara sandbox 140-141 230
Sandboxes 140-147 230-232
Sapo bench 104 210
Sapo bench without back 104 210
Sapo seniors‘ bench 102-103 209
Scilla planter 128 224
Scori litter bin 131 227
Screens 55 185
Seat pads 120-122 218-220
Seating groups 76-85
112-116
196-198
214-216
Securing of river banks 33 171
Serengeti set 112-113 214
Sheets 32 170
Shelter 116 216
Sleepers 27 167
Somerset bench 97 205
Special packaging 157
Spiral herb planter 128 224
Square posts, with point 46 178-179
Square profiles,
without point
30-31 169-170
Standard sheet 32 170
Stelvio set 115 215
Stora litter bin 130 226
Sutton bench 88 199
T
Table & bench sets 76-85 196-198
Tables 76-85
109-116
196-198
211-216
Taunus forest bench 98 206
Taunus forest bench
without back
98 206
Taunus set 85 198
Taunus table 111 213
Terra kids‘ raised bed 149 233
Terrain panel, mobile 72 194
Thar sandbox system 147 232
Thresholds 27 167
Tivoli bench 86-87 198
Tivoli children‘s table 135 228
Tivoli set 78 196
Tivoli table 109 211
Tounge and groove boards 37-40 174-175
Trafalgar Square bench 88 199
Tremezzo bench 105 210
Tremezzo youth bench 105 210
Treptow bench 95 203
Triangular profiles 155
Trinity table 109 212
Tubing blocks 156
Tunnelling protection 33 171
Turon round bench 117 217
Tyre plates 157
U-X
U-profiles 26 166
Ventilation channels 159
Vinca planter 126 222
Waza bench 95 203
Waste bins 130-131 226-227
Weed cover 73 195
X-profile stakes 47 179

1997
1996
1999
1998
Establish a processing plant and begin
contracting work for the German Dual
System.
Start production and marketing of
pasture posts and floor mats.
Open sales offices in Ihlienworth
(relocated to Cadenberge in 2013).
Acquisition of company premises
(formerly rented) in the grounds of
Hahn Airport.
Open sales offices in Köthen.
Acquisition of the plastics recycling
division of Dr. Spiess Kunststoff-
Recycling GmbH & Co. in Kleinkarlbach.
Expansion of production facilities by
two extruders, allowing for production
of street furniture, cover plates and
noise barriers.
In early 1997, machinery consists of
one extruder, two injection moulding
machines and one processing plant
with two shredders and two pelletisers.
The company is founded and based at
the former US Hahn Air Baseport, as
part of a decommissioning project.
1993
1999
HAHN Lärmschutz GmbH founded
focusing on noise barriers.
2012
Open HAHN Plastics Limited sales
office and manufacturing facility in
Manchester, UK.
2016
Open HAHN Plastics (North America)
Ltd. sales office in Waterloo, Ontario,
Canada.
2014
Establishment of HAHN France SAS
sales branch in Metz, France.
2001
Deliver more than 1000 tonnes (about
50 lorry-loads) of finished products per
month for the first time.
2010
Deliver more than 2000 tonnes (about
100 lorry-loads) of finished parts per
month for the first time.
2010
Purchase neighbouring land to increase
company grounds by approx. 20,000 m²
to the current 75,000 m².
2008
Significantinvestmentinprocessing
technologytoincreasein-house
agglomerateproduction,improve
monitoringandraisestandardsof
qualitycontrol.
2011
Extensive expansion of assembly
and loading areas to improve order
processing and shipping times.
2005
Introduction of an export department
due to increasing demand from abroad.
The export team consists of five
employees.
1998
hanit® registered as a trademark. From
this date forward the product range is
marketed around the world under the
hanit® brand.
2003
Number of employees exceeds 100 for
the first time.
2005
Awarded „THE BLUE ANGEL“ eco-label.
THE CLEVER SOLUTION
6

Ulrich Kossin spent much of his career as the head of an
accounting practice in Vreden, Westphalia. His insight into
business gave him a unique view of a changing world. By
the early 1990s, he realised that some of the best investment
opportunities lay in future-oriented companies.
When packaging legislation was introduced in Germany
in 1991, Ulrich Kossin saw the potential for an exciting new
business sector. He took a leap of faith and founded HAHN
Kunststoffe GmbH in 1993. The new company was based
in Hunsrück, more than 180 miles from Ulrich’s home in
Münster.
The early years were not easy. As a pioneer in the recycling
industry (making packaging materials), Ulrich faced huge
challenges. There was no steady supply of raw materials and
production techniques were under-developed. The industry
was starting from scratch and there were no market-driven
products or sales channels.
Ulrich Kossin developed all these on his own. He invested
huge sums of his own money into the company, not to
mention his patience, hard work and perseverance. His
courage eventually paid off and HAHN Kunststoffe became
the market leader for recycled finished parts. Today, we
remain faithful to the tradition of Ulrich Kossin and continue
to grow.
HAHN Kunststoffe GmbH has over 20 years of history.
The diagram opposite shows our key milestones.
A MAN
AND HIS VISION
I N T H E F O O T S T E P S O F U L R I C H K O S S I N

> 250HAHN Kunststoffe GmbH
currently employs
more than 250 staff.
EM PLOY EE S
8
THE CLEVER SOLUTION
105,000 m2
BUSINESS PREMISES
11,000 m² of these are factory
buildings & administration
buildings
SALES
> 2,000
PRODUCT RANGE
HAHN Kunststoffe GmbH
manufactures over 2,000
products at present.
44,000 t
CAPACITY
processed annually. In addition,
35,000 t of hanit® products
are recycled and sold
annually.
Globally
SERVICES TECHNOLOGY KNOW-HOW QUALITY
» Customer and market-oriented
product range
» Expert advice, excellent customer service
and fast delivery.
» Processing of recycled plastics into
agglomerates or pellets
» Production of finished parts by extrusion,
intrusion, compression and die-cast
processes
» Patent-protected products
and production processes
» Research, development
and design
» hanit® products are
suitable for playgrounds
» Products are tested according to
DIN EN 71 Section 3
» Periodic TÜV certification
» Internal and external quality controls

9For more information go to » www.hahnplastics.com

10
THE CLEVER SOLUTION

Products made of hanit® are
very environmentally friendly.
Our products do not damage or
contaminate the environment.
Our raw material is used plastic. Although that sounds
simple, the market for used plastic is extensive, growing and
surprisingly complicated.
There is a huge variety of used plastic on the market and we
need to choose our ingredients very carefully. hanit® is about
quality and consistency - our reputation depends on it. To
maintain these high standards we only buy from suppliers
we can trust. We never compromise on quality.
To make things even more complicated, not all of our
products are the same. They all have their own requirements
and properties; so ingredients differ too. Our buyers have
in-depth knowledge of which used plastic is needed for each
of our products.
No matter what material we use or which product we’re
making, whether recycling or manufacturing, we keep
emissions low. Our commitment to the environment will
never change.
That‘s one of the reasons why we’re the first company ever to
be awarded the “Green Angel” recycling award.
LET’S TALK
RUBBISH
WELCOME TO THE WORLD OF USED PLASTIC
Current use of plastics
from fossil raw materials
per year in Germany
of plastics are used
in packaging for perishable
products
Some 50% of light
packaging from yellow
bags and yellow bins
are plastics
At present, about 60% of plastic
packaging from yellow bags is
processed into new products
12.5
mt
over
30%
50%

WHERE’S THE CATCH?
THERE ISN’T ONE.
DURABILITY
Each material has its advantages. Unfortunately, it also has its drawbacks.
Wood, for example, is attractive but it can’t withstand the rain and cold for long. Time-consuming
maintenance helps, but wood can’t last forever. Concrete, is very durable but it’s just too heavy for
many applications. Concrete is difficult to transport and as years go by, dirt and water marks take their
toll. It can also crack in cold weather and flake. Steel, on the other hand, is incredibly versatile but you
have to think about rust - and stainless steel is expensive. The same can be said about new plastics,
not to mention the impact on the environment.
And then there‘s hanit®.
Unlike wood or steel, weather isn’t a problem for hanit®. As it’s lighter than concrete and cheaper
than steel, it’s easier on the back and the budget! But best of all, virtually any product can be made
out of this high-tech material. Thanks to its unique composition, hanit® can be adapted to almost any
application.
» Weather-resistant
» Rot-resistant
» Splinter-free and carries
low risk of injury
» Can be used all year round
» Moisture-repellent, does not
absorb water and dries quickly
» Produced without preservatives
» Reduces the strain on landfill, is
sustainable and environmentally
friendly
» Recyclable in the material cycle
» Awarded the „BLUE ANGEL“
eco-label
» Non-polluting
» Non-toxic (safe according to
DIN 71, Section 3 Playground
Regulation)
W H AT M A K E S h a n i t ® U N I Q U E ?
THE CLEVER SOLUTION
12
LIGHT-WEIGHT ECONOMICAL
» Installation does not require
heavy equipment
» Higher load capacity
» Transport cost savings
» Faster installation
» Reduced workload
» Long service life
» Resistant to oils, brines, acids,
and salt water
» Low maintenance and service
costs
» Made of high-quality processed
secondary plastics (polyolefins)
» Excellent
price-quality ratio
» Perfect construction material,
especially for robust profiles
and finished parts
ECO-FRIENDLY SIMPLE PROCESSING
» Easy to process mechanically
(drilling, sawing, screwing,
nailing)
» Simple adjustments can be
made on the spot

14
THE CLEVER SOLUTION

hanit® has many advantages. It’s weather-resistant,
chemical-resistant and splinter-free. It’s also maintenance-
free which makes it unbeatable when comparing price with
performance.
The uses for hanit® are virtually unlimited. It’s no wonder
that over 2000 products now bear the hanit® name. Its uses
include: patios, planters or palisades for horticulture and
landscaping; street furniture for the public realm; flooring,
panels and profiles for industrial construction; mud tables
for playgrounds; or posts for pasture fencing and paddock
rails.
All these products differ, not only in the way they are made
but also in their composition. For example, a sandbox does
not require steel reinforcement but a bench plank does.
When used in agriculture, hanit® needs to be exceptionally
robust and resistant to acids and brines. For cable duct
cover plates, load stability is essential. We develop the
products and formulations accordingly.
We take great pride in meeting the individual requirements
for each application and product. This is what makes hanit®
so exceptionally resilient and efficient.
We cover the following areas:
BEAUTIFUL PATIOS,
DURABLE POSTS
2 0 0 0 Q U A L I T Y P R O D U C T S
HORTICULTURE AND
LANDSCAPING
DOCK & HARBOUR
CONSTRUCTION
ROAD CONSTRUCTION
AGRICULTURE BUILDING
TECHNOLOGY
EVENTS
MATERIALS

hanit® has always been synonymous with strength and
durability. It handles stress perfectly and is ideal for tough
everyday applications. With or without reinforcement,
hanit® products are extremely durable.
But what about those profiles that are subjected to extreme
stress and the toughest conditions? Take a look at hanit®
Ultra - the strongest of all hanit® formulations.
hanit® Ultra’s specially developed formulation is both
unique and exceptional. Its combination of high quality
polyolefins and other additives gives it outstanding
strength. The tensile strength and the elasticity coefficient
(e-module) are 60% higher than standard hanit® – but the
cost is not.
The properties of hanit® Ultra can even save on project costs
or offset additional spending. For example, a board made
of hanit® Ultra can span larger gaps thanks to its strength
and increased rigidity. Think about it: stronger boards mean
fewer posts.
What is more, hanit® Ultra’s purity gives it an attractive
wood-like grain. The colour is even more consistent and
the high quality finish gives hanit® Ultra its distinctive
appearance.
hanit® Ultra combines superior resistance to bending stress,
tensile strength and tensile extension with outstanding
aesthetics. Ultra strong. Ultra beautiful.
BETTER,
IMPROVED
hanit ® Ultra: F O R T H E TO U G H E S T J O B S
16
THE CLEVER SOLUTION

Do we just melt down a few yoghurt pots and make a park bench?
It’s not that easy.
HAHN Plastics Ltd. is a high-tech company. This means investing in research
and development and constantly upgrading our machinery and laboratory
equipment. We also make sure that our product range is not limited to just a
few standard lines. We currently offer more than 2000 products and we owe
much of this to our customers. They are always making suggestions, proposing
modifications, asking for variations and coming up with ideas. Our product
range is constantly growing thanks to dialogue with our customers.
This relationship is also the basis for many custom-made products. Our
customers often have requirements that cannot be met with a standard
product. This requires custom work and the knowledge and expertise of
our mechanical engineers.
Such customisations are only possible because HAHN
Plastics Ltd. do everything in one place – from raw
material selection to production. That is why we
do not subcontract abroad. Quality cannot be
outsourced.
INNOVATING,
TIME AND AGAIN!
N E W I D E A S F O R U S E D P L A S T I C S
THE CLEVER SOLUTION
18

THE CLEVER SOLUTION
HAHN Plastics Ltd. » +44(0)1618501965132

FUN,
PLAYFUL
AND SAFE.
05
PLAYGROUND
FURNITURE
» Kids’ benches
» Kids’ tables
» Sandboxes
» U-profiles
» Mud tables
» Raised beds
Child’s play, splinter-free.
For kids, playgrounds are a chance to create a world of fun and make
believe. For parents, playgrounds can be a source of bumps, bruises,
grazes and scrapes. Wouldn’t it be nice to let kids play without
worrying about splinters, rusty metal and sharp edges?
There’s no need to worry with hanit®. Whether sandboxes, raised
beds or mud tables, everything has round or soft edges and 100%
splinter-free. They’re also robust, durable and weather-resistant.
Play on!
5

CANETTI CHILDREN'S BENCH
Child-friendly seating
The Canetti children’s bench is spe-
cially designed for kids. With a seat
height of 31 cm and wide supporting
legs, it’s extremely sturdy. There is
no back rest so kids can sit and play
in all directions and it’s available in
four colour combinations. The bench
is also relatively lightweight and goes
perfectly with our Tivoli children’s
table.
» Previous name: Thatcham
Children's Bench (TK150)
» 3 bench planks: 150 x 10 x 4.7 cm
» Length: 150 cm
» Seat height: 31 cm
» Weight: 35 kg
» Available in four colours
» Sturdy
Brown Grey-Green Grey-Blue Grey-Red
DETAILS FROM PAGE 228
THE CLEVER SOLUTION

TIVOLI CHILDREN'S TABLE
Specially made for kids
The Tivoli children’s table is a per-
fect match for the Canetti children’s
bench. They’re made from the same
hanit® material, in the same colour
combinations and they fit together
nicely. And thanks to being so sturdy
and tough, the Tivoli can pass one of
nature’s toughest tests –kids at play!
» Previous name: Thatcham
Children's Table (TK150)
» 5 table planks: 150 x 10 x 4.7 cm
» Table surface: 150 x 60 cm
» Table height: 57 cm
» Available in four colours
» The table kids like
» In the best hanit® quality
5
:: 01 BUILDING & CONSTRUCTION :: 02 FENCING & BARRIERS :: 03 GROUNDWORK & SURFACES :: 04 OUTDOOR SPACES & FURNITURE :: 05 PLAYGROUND FURNITURE :: 06 PROJECT REALISATION

MIRA CHILDREN'S BENCH
For splinter-free little hands
The classic bench, designed especially
for kids. Everything about the Mira is
child-friendly: every corner is smooth-
ly rounded off and the dimensions are
intended for a broad age range. And
best of all, there’s a matching table to
go with it!
» Previous name: Skipton
Children’s Bench (SK200)
» 1 seat board: 200 x 40 x 7.5/6.5 cm
» Solid and substantial
» For rough and tough use
» The benchmark for benches
Brown
THE CLEVER SOLUTION

MIRA CHILDREN'S TABLE
The long-lasting little ‘un
This cute, fun and child-friendly table
does a great job in almost any situa-
tion. At only 45 cm high, it has a very
low centre of gravity and appears to
be even more stable than its grown
up counterpart. Strong, durable and
sturdy, this is a great addition to the
Mira family.
» Previous name: Skipton
Children’s Table (SK200)
» 2 table boards:
200 x 40 x 7.5/6.5 cm
» Table surface: 200 x 80 cm
» Child-proof
» Perfect choice of materials
Brown
5

FORIO CHILDREN'S SET
Tailor-made for kids
If you let kids draw a picnic bench, it
will probably look like the Forio. It’s
the classic shape – just smaller! The
table and bench form a sturdy unit
that can be used for more than just a
picnic bench. Throw a sheet over the
Forio and it becomes a cave or tent:
great for little kids with big imagina-
tions.
» Previous name: Anglesey
Children's Set (AGK150)
» 1 table top: 150 x 60 x 8 cm
» 2 bench planks: 150 x 19 x 4 cm
» The "games table" par excellance
» More than seating
THE CLEVER SOLUTION

5

FOR LITTLE
KIDS WITH BIG
IDEAS.
THE CLEVER SOLUTION
140 HAHN Plastics Ltd. » +44(0)1618501965

SAHARA
SANDBOX
Wonderland for the imagination
The Sahara sandbox is available in two sizes and four colour com-
binations. It’s a great example of why hanit® has so many advan-
tages over wood, concrete or steel: it doesn’t rot or splinter; it’s
weather-resistant and UV-resistant; it needs little or no mainte-
nance and it’s perfect for playtime!
» Previous names: Walton and Wilmington
» Length x Width x Height: 200/300 x 200/300 x 27 cm
» Profile: 8 x 23 cm
Grey-Brown Grey-Green Grey-Blue Grey-RedDETAILS FROM PAGE 230
5

MOJAVE SANDBOX
For endless play in an octagonal shape
The octagonal shape of the Mojave
is what sets it apart. It gives exciting
new opportunities for playground
design and is available in three sizes.
It is lower than most sandboxes so
kids can easily run in, out, over and
around. Make the Mojave the focal
point of your new playground.
» Previous name: Sevenoaks
» Diameter: 240, 300 und 400 cm
» Height: 21 cm
» Side profiles: 15.5 x 21 cm
» Simple set-up
» Supplied in kit form
Brown
THE CLEVER SOLUTION

NAMIB SANDBOX
Simple, square and practical
The Namib is the classic sandbox:
square, a solid base and a wide sitting
edge. There’s lots of space for kids to
play and let their imaginations run
free. There’s no need to worry about
splinters, rusty edges or even harm-
ful chemicals – hanit® is completely
non-toxic and free from hazardous
preservatives. Available in four sizes.
» Previous name: Sheringham
» Squares: In square, 200, 300, 400
and 500 cm respectively
» Height: 31 cm
» Side profiles: 9 x 9 cm
» Seat rest: 19 x 4 cm
» The classic sandbox
» Best hanit® quality
Brown
5

GOBI SANDBOX
Big fun, large or small
The Gobi is available in large or small.
The small version is compact enough
to fitverysmallgardens,decksoreven
balconies. The large one is designed
for playgrounds. You choose the size,
the Gobi takes care of the rest.
» Previous name: Stonehaven
» Sizes: In square, 120 and 240 cm
respectively
» Height: 30 cm
» Wide edge for sitting: 4 x 14 cm
» Simple assembly
Brown
THE CLEVER SOLUTION

KALAHARI SANDBOX
Fun in every corner
The hexagonal Kalahari sandbox is
available in two sizes. The wide edge
provides lots of sitting space and
every young trailblazer can find a spot
for digging and building. Attractive,
splinter-free and non-toxic.
» Previous names: Soberton
and Southam
» Diameters: 175 cm and 240 cm
» Height: 30 cm
» Side profiles: 3.8 x 13 cm
» Seat rest: 4 x 14 cm
» Other dimensions available
on request
Brown
5

LUT SANDBOX
Set sail in the sand
The Lut is our most distinctive sand-
box. Its boat-shape design is sure to
be the eye-catcher of the playground
– guaranteed to have kids eager to
jump in and set sail in the sand! The
Lut is completely pre-assembled on
delivery and available in four colour
combinations.
» Previous name: Stratford
» Length x Width: 285 x 105 cm
» Height: 30 cm
» Four colour variations
» Completely assembled on
delivery
» Distinctive boat shape
» Paradise for the smallest ones
Grey-Brown Grey-Green Grey-Blue Grey-Red
THE CLEVER SOLUTION

THAR SANDBOX SYSTEM
An adaptable system for variable spaces
The Thar sandbox system is a highly
adaptable assembly kit for creating
safeanddurablesandboxes.Theparts
are easy to understand and simple to
build. And best of all, connections and
fittings are kept out of harm’s way: no
screws or splinters causing injuries to
inquisitive little hands.
» Sandbox set-up with a system
» Easy to install
» For compacted and non-
compacted bases
» Cost-effective u-profiles for
lighter handling
» Available in many sizes
» Height: 16 cm
Brown
For solid bases: For non-solid bases:
5

MUD TABLE
Kids love playing with sand and water
but when you mix this combination
with wood, the fun doesn’t last for
long. Wood weathers and splinters
quickly. hanit® mud tables are much
more durable. They won’t weather,
splinter or rot. What’s more, our ta-
bles are easy to assemble and have
endless combinations.
» Playing in mud with a system
» Elements are also available
individually
» With matching pump platform
» Few individual parts
» Does not contain any
preservatives
» Permanent playing fun
WATER PUMP STAND
Green-Brown
THE CLEVER SOLUTION

TERRA KIDS' RAISED BED
or l le ree fi ers
Gardening with our raised bed is a breeze! This specially devel-
oped version for kids is the perfect introduction to gardening.
Children develop little green fingers and learn instinctively to
treat nature with respect. And you don’t need a big garden: the
Terra is compact enough for most spaces.
» Measurements (LxWxH): 190 x 90 x 63 cm
» Child-friendly height
» Completely splinter-free
» Does not rot, unlike wood
» Makes learning about nature fun
Grey Brown
5

CANETTI CHILDREN'S BENCH
Child-friendly seating
Width: 150 cm
Colour Dimensions
WxDxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 150 x 34 x 31 35.0 KTA10150 182.00
■ Grey-Blue 150 x 34 x 31 35.0 KTC10150 192.00
■ Grey-Green 150 x 34 x 31 35.0 KTB10150 192.00
■ Grey-Red 150 x 34 x 31 35.0 KTD10150 202.00
Benches and tables are delivered as a kit. Assembly instruction and materials are included.
Slats: Premium type
3 bench planks: 150 x 10 x 4.7 cm
Seat height: 31 cm
Previous name: Thatcham Children's Bench (TK150)
Slats: Premium type
5 table planks: 150 x 10 x 4.7 cm
Table height: 57 cm
TIVOLI CHILDREN'S TABLE
Specially made for kids
Width: 150 cm
Colour Dimensions
WxDxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 150 x 60 x 57 80.0 TTA 10 150 246.00
■ Grey-Blue 150 x 60 x 57 80.0 TTC10 150 266.00
■ Grey-Green 150 x 60 x 57 80.0 TTB10 150 266.00
■ Grey-Red 150 x 60 x 57 80.0 TTD10 150 282.00
Previous name: Thatcham Children's Table (TK150)
MIRA CHILDREN'S BENCH
For splinter-free little hands
Width: 200 cm
Colour Dimensions
WxDxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 200 x 40 x 31 74.0 BKS 40200 246.00
Seating: Compact type
1 seat board: 200 x 40 x 7.5/6.5 cm
Seat height: 31 cm
Previous name: Skipton Children's Bench (SK200)
THE CLEVER SOLUTION

MIRA CHILDREN'S TABLE
The long-lasting little ‘un
Width: 200 cm
Colour Dimensions
WxDxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 200 x 80 x 45 131.0 TKS40200 405.00
Seating: Compact type
2 table boards: 200 x 40 x 7.5/6.5 cm
Table height: 45 cm
Table surface: 80 x 200 cm
Previous name: Skipton Children's Table (SK200)
Width: 150 cm
Colour Dimensions
WxDxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 150 x 108 x 57 80.0 SBA 40 150 385.00
■ Grey-Blue 150 x 108 x 57 80.0 SLA 40 150 447.00
■ Grey-Green 150 x 108 x 57 80.0 SMA 40 150 447.00
■ Grey-Red 150 x 108 x 57 80.0 SRA 40 150 475.00
1 Table top: 150 x 60 x 8 cm
2 bench planks: 150 x 19 x 4 cm
Seat height: 34 cm
Table height: 57 cm
Table surface: 60 x 150 cm
Previous name: Anglesey Children's Set (AGK150)
CANETTI CHILDREN‘S BENCH
TIVOLI CHILDREN‘S TABLE
5

SAHARA SANDBOX
Wonderland for the imagination
Sahara 1 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Grey-Brown 200 x 200 x 27 195.0 WG 200200 412.00
■ Grey-Blue 200 x 200 x 27 195.0 WL200200 464.00
■ Grey-Green 200 x 200 x 27 195.0 WM200200 464.00
■ Grey-Red 200 x 200 x 27 195.0 WR200200 474.00
Sahara 2 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Grey-Brown 300 x 300 x 27 295.0 WG 300300 656.00
■ Grey-Blue 300 x 300 x 27 295.0 WL300300 748.00
■ Grey-Green 300 x 300 x 27 295.0 WM300300 748.00
■ Grey-Red 300 x 300 x 27 295.0 WR300300 766.00
Side profile: 8 x 23 cm. Seat rest: 4 x 19 cm. Dimensions: Outside edge of seat rest. Delivered
as a kit excluding base. Other dimensions available on request.
Previous name: Walton and Wilmington
MOJAVE SANDBOX
For endless play in an octagonal shape
Mojave 1 sandbox
Colour Dimensions
øxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 240 x 21 220.0 SB240 021 600.00
Mojave 2 sandbox
Colour Dimensions
øxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 300 x 21 275.0 SB300 021 659.00
Mojave 3 sandbox
Colour Dimensions
øxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 400 x 21 365.0 SB400 021 842.00
Side profile: 15.5 x 21 cm. Dimensions: Outside edge. Delivered as a kit excluding base.
Other dimensions available on request.
Previous name: Sevenoaks
NAMIB SANDBOX
Simple, square and practical
Namib 1 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 200 x 200 x 31 250.0 SR 200200 548.00
Namib 2 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 300 x 300 x 31 360.0 SR 300300 579.00
Namib 3 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 400 x 400 x 31 480.0 SR 400400 764.00
Namib 4 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 500 x 500 x 31 600.0 SR 500500 968.00
Side profile: 9 x 9 cm. Seat rest: 4 x 19 cm. Dimensions: Outside edge of seat rest. Delivered
as a kit excluding base. Other dimensions available on request.
Previous name: Sheringham
THE CLEVER SOLUTION

GOBI SANDBOX
Big fun, large or small
Gobi 1 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 120 x 120 x 30 71.0 SV120120 247.00
Gobi 2 sandbox
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 240 x 240 x 30 142.0 SV240240 307.00
Side profile: 3.8 x 13 cm. Seat rest: 4 x 14 cm. Dimensions: Outside edge of seat rest.
Delivered as a kit excluding base. Other dimensions available on request.
Previous name: Stonehaven
KALAHARI SANDBOX
Fun in every corner
Kalahari 1 sandbox
Colour Dimensions
øxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 175 x 30 72.0 SO160 030 297.00
Kalahari 2 sandbox
Colour Dimensions
øxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 240 x 30 108.0 SO240 030 327.00
Side profile: 3.8 x 13 cm. Seat rest: 4 x 14 cm. Dimensions: Outside edge of seat rest.
Previous name: Soberton and Southam
KALAHARI SANDBOX
5

LUT SANDBOX
Set sail in the sand
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Grey-Brown 105 x 285 x 30 150.0 SG285 100 454.00
■ Grey-Green 105 x 285 x 30 150.0 SM285 100 506.00
■ Grey-Blue 105 x 285 x 30 150.0 SL 285 100 506.00
■ Grey-Red 105 x 285 x 30 150.0 SR 285 100 509.00
Side profile: 3.0 x 12.5 cm. Seat rest: 4 x 10/19 cm. Dimensions: Outside edge of seat rest.
Completely assembled on delivery. Other dimensions available on request.
Previous name: Stratford
THAR SANDBOX SYSTEM
An adaptable system for variable spaces
For non-solid bases
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 325 x 325 x 16 357.6 TBU 325325 529.00
■ Brown 475 x 475 x 16 572.0 TBU 475475 881.00
■ Brown 625 x 625 x 16 707.6 TBU 625625 1057.00
■ Brown 775 x 775 x 16 890.0 TBU 775775 1409.00
For solid bases
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Brown 325 x 325 x 16 357.6 TBB 325325 529.00
■ Brown 475 x 475 x 16 572.0 TBB 475475 881.00
■ Brown 625 x 625 x 16 707.6 TBB 625625 1057.00
■ Brown 775 x 775 x 16 890.0 TBB 775775 1409.00
LUT SANDBOX
THE CLEVER SOLUTION

MUD TABLE
End table
Colour Dimensions
WxLxHaxHb(approx.cm)
Weight
(approx. kg)
Order No Price
(£)
■ Green-Brown 60 x 150 x 32/32 55.0 MBM40150 289.00
Flow element 1
Colour Dimensions
Weight
(approx. kg)
Order No Price
(£)
Flow element 2
Colour Dimensions
Weight
(approx. kg)
Order No Price
(£)
Flow element 3
Colour Dimensions
Weight
(approx. kg)
Order No Price
(£)
■ Green-Brown 60 x 150 x 85/95 77.0 MBM95 150 327.00
Water pump stand
Colour Dimensions
Weight
(approx. kg)
Order No Price
(£)
■ Brown 100 x 100 x 20 80.0 MBB20 100 243.00
Legs to be embedded in the ground. Height from upper edge of soil. Delivered as a kit.
Other sizes and colours available on request.
TERRA KIDS' RAISED BED
or l le ree fi ers
Raised bed Terra 1
Colour Dimensions
WxLxH (approx. cm)
Weight
(approx. kg)
Order No Price
(£)
■ Grey 90 x 190 x 63 128.0 HTG 060190P 307.00
■ Brown 90 x 190 x 63 128.0 HTB 060190P 320.00
Delivered as a kit excluding base.
5

BENEFIT
FROM OUR
KNOWLEDGE
THE CLEVER SOLUTION

There are none and for good reason. When dealing
with complex projects, “off the rack” solutions simply
don’t work.
This is where our development department is required. In
collaboration with you, individual designs are created are a
perfect fit - regardless of whether it’s cable duct covers, tunnel
blocks, specialised pallets or ventilation channels and also
various steel reinforcement can strengthen your projects.
Just get in touch with us. You’ll be amazed at the possibilities.
“WHERE ARE
THE TABLES?”
6

THE CLEVER SOLUTION
236
High-speed band saws and
circular saws with slightly crossed
teeth, preferably carbide-tipped,
produce the best finish.
Quickly remove any shavings
to avoid smearing the plastics.
Lengths can also be shortened
using a chainsaw, however, it is
necessary to consider a loss of
accuracy.
Spiral bits with a helix angle from
20° to 30° peak angle from 110°
to 120° can almost always be
used. Relaxation strokes should
occasionally be used, especial-
ly with larger drilling depths, to
avoid high frictional heat.
Angle grinders are not suit-
able for cutting due to their
high speed. Plastic parts, which
exhibit burrs or edges following
machining, can be processed
with an angle grinder.
Standard planes can also be used
to process plastics. The surface is
largely dependent on the feed
rate, cutting speed, clearance and
cutting angle and the condition
of the machining blade.
The span cross-section should be
as large as possible to keep the
machining heat relatively low.
Depth of cut and feed rate should
be high, the cutting speed on the
other hand low. To increase the
tool life, we recommend using
routers with indexable carbide
inserts.
hanit®
RECYCLED PRODUCTS
PROCESSING
GUIDELINES
TOOL SELECTION
SAWING & CUTTING DRILLING DEBURRINGPLANINGROUTING

When bolting recycled profiles together, the profile to be fastened
must be pre-drilled (e.g. boards, dock planks, square profiles).
The hole must be larger than the bolt. Elongated slots are recom-
mended to account for the temperature-related expansion of the
material.
hanit® products can be nailed both conventionally and with
nail guns. Due to the compact surface, it is, however, more
difficult to penetrate the profiles than it would be with wood.
Consider this when fixing.
If profiles are hammered, we recommend using a ram or a corner
protector to prevent damage to the product.
Boards, thresholds, and square profiles must not be press-fitted.
The profiles may exhibit length variations of +/- 1.5% due to tem-
perature fluctuations. An expansion distance (expansion joint)
must therefore be maintained during installation.
Recycled profiles are only partially paintable due to their
properties. Good results have been obtained using permanently
elastic plastic paints (all-weather paints) together with a rough-
ened surface and priming. Permanent paint adhesion cannot
be guaranteed.
Sunlight affects the profile alignment, and can, for example, cause
fence posts to tilt. To prevent profile distortion caused by sunlight,
the profiles should not be stored loosely.
Compared to wood or metal products, plastic has lower stiffness
and greater flexibility. These special material properties must be
observed accordingly when planning distance between supports
in dock, fence, and patio construction.
We have structural verification tests, installation recommenda-
tions, and mounting instructions for many products and applica-
tions. For more information please visit www.hahnplastics.com
TIPS FOR PROCESSING RECYCLED PROFILES
hanit® products can be processed as necessary with
conventional tools and machinery used in wood and
metal processing.
However, due to the properties of the material, some
specific features must be considered:
» In general, machining of profiles causes higher tool wear.
We therefore recommend the use of carbide-tipped tools.
» Recycled products have a closed surface. The core may
have a honeycomb structure, which becomes visible during
machining. This is due to the material properties.

238 HAHN Plastics Ltd. » +44 (0) 161 850 1965
THE CLEVER SOLUTION
HAHN PLASTICS LIMITED
CONDITIONS OF SALE
1. DEFINITIONS
The following words used in theseTerms and Conditions (the“Conditions”) will have the mean-
ings set out as follows:
“Company”means HAHN Plastics Limited
„Goods“ mean the products or materials supplied by the Company
„Services“ means the whole or any part of the services which the Company is to supply or carry
out under the contract
“Purchaser” means the corporate entity, firm or person to which the Goods and/or Services
are supplied
„Order“ means the Purchaser’s purchase order document and, where used, Specification spec-
ifying the Goods and/or Services to be supplied.
2. MAKING THE CONTRACT
1. The Company’s quotation constitutes an invitation to treat (i.e. a proposal to enter into a
contract) and will unless otherwise stated in the quotation, be open for a period of 30 days
beginning with the date of the quotation unless the Company has previously withdrawn it.
2. Any order issued by the Purchaser is subject to acceptance by the Company and a contract
will only be formed when the Company has accepted the Purchaser’s order. The quotation,
order and acceptance will together form the contract governed by these Conditions.
3. Where these Conditions are in conflict with those set out in any specification, offer to pur-
chase or order received, these Conditions will prevail unless otherwise agreed by the Com-
pany in writing.
4. No employee, agent or officer of the Company is authorised to agree to any variation of
the Conditions or to agree to the supply of Goods and/or Services by the Company, except
subject to these Conditions without variation. A variation made in writing and expressly
accepted by a director of the Company is permitted.
3. CANCELLATION/SUSPENSION OF DELIVERIES
1. Once the contract is formed, no cancellation by the Purchaser is permitted expect where
expressly agreed by the Company in writing.
2. The Purchaser will in the event of agreed cancellation by the Purchaser indemnify the Com-
pany fully against all charges, costs and losses (including loss of profit) sustained by it as a
result of the cancellation.
3. The Company may without prejudice to its other rights, suspend or cancel further deliver-
ies and/or work under this and any other contract between the parties hereto if the Pur-
chaser fails to make payment of any sum on its due date for payment, or if the Purchaser
becomes insolvent or has any form of insolvency proceedings or action taken against it,
including any receivership, petition or order of administration, winding up or bankruptcy,
any proposal for or voluntary arrangement with creditors. In such circumstances, the Com-
pany will be entitled to immediate payment from the Purchaser in respect of any goods
manufactured but not yet delivered in connection with an order from the Purchaser, or in
connection with services undertaken for the Purchaser but not completed.
4. The Company may without prejudice to its other rights, where the Purchaser refuses or is
unable or fails to take delivery of the Goods by the dates specified in the contract or where
no date is specified in the contract, within a reasonable period, either:
3.4.1. put the Goods into its stock at the Purchaser’s risk and expense and submit an in-
voice for payment as though the Goods had been delivered on the date when they
were transferred to stock, or
3.4.2. sell or offer to sell the Goods or any part of them to other interested parties, in which
case the Company will be entitled to recover from the Purchaser as liquidated dam-
ages the amount of gross profit forgone by the Company on the sale to the Purchas-
er as certified by the Company, on the basis of the price that would have applied at
the date for delivery.
4. PRICE
1. Unless otherwise stated the price payable for the Goods and Services will be that set out
in the Company’s quotation and confirmed by its acceptance of the Purchaser’s order. The
price and any carriage, packaging or other costs will be exclusive of Value Added Tax.
2. Prices quoted are based on current rates of wages, prices of material, freight and insurance.
The Company reserves the right to amend the price at any time prior to delivery of the
Goods to take account of any increase in the price to the Company of goods, services, raw
materials, labour or other inputs used in the production of the Goods, or currency fluctua-
tions increasing the cost of production or purchasing the Goods.
3. The Company reserves the right to amend its prices where a quotation was based on a
stated quantity which is greater or less than the quantity ordered by the Purchaser.
5. TERMS OF PAYMENT
1. The Company will be entitled to payment of the price payable for the Goods upon despatch
of the goods and in respect of Services when the Services are in the opinion of the Compa-
ny substantially complete.
2. Payment is due 30 days from the date of invoice.Time of payment will be deemed to be the
essence of the contract.
3. The Company reserves the right to charge interest at 8% per annum above the Bank of
England base rate for the time being on all overdue accounts, such interest being deemed
to accrue and be compounded on a daily basis from the due date for payment.The Compa-
ny also reserves the right to raise additional charges in accordance with the Late Payment
of Commercial Debts (Interest) Act 1998 as amended by the Late Payment of Commercial
Debts Regulations 2002.
4. The Purchaser will not be entitled to withhold, deduct or set off against any sum payable
to the Company any amount or claim whatsoever. In particular but without limitation, the
Purchaser may not set off any amount or loss or damage arising from alleged defects in
Goods received or Services supplied by the Company.
6. DELIVERY
1. The delivery date given by the Company is the best estimate at the time and is likely to
fluctuate prior to receipt of a firm order from the Purchaser. The Company will make all
reasonable efforts to deliver the Goods on the date given but the Company cannot accept
liability for delay or non-delivery occurring for any reason whatsoever. Time of despatch or
delivery is not of the essence and a delay in delivery will not entitle the Purchaser to treat
the contract as repudiated or to any damages.
2. The Company reserves the right to despatch or make delivery by instalments and to tender
a separate invoice in respect of each instalment.
3. Where an order is placed for Goods to be supplied to the Purchaser against time schedules
sent to the Company from time to time by the Purchaser, the number or quantity of Goods
stated in the order must be accepted by way of delivery within 12 (twelve) calendar months
from the date of such order or such other period as the Company has agreed in writing.
4. Where goods are delivered to the Purchaser, the Purchaser will be responsible for unload-
ing unless the Company has expressly agreed to unload the Goods.
5. Carriage is chargeable on all despatches where the Company undertakes delivery.
7. DIVISIBILITY
With reference to blanket orders for goods that are subject to call off and to be delivered in
instalments, the Company will be entitled to invoice for each instalment as and when each
instalment is delivered and invoices will be due and payable on agreed terms in their own right
notwithstanding that they are part of a blanket order.
8. RISK AND THE PASSING OF PROPERTY
1. Risk in the goods will pass to the Purchaser when the Goods leave the despatching premis-
es of the Company.
2. So long as any money owed to the Company from the Purchaser is outstanding in respect
of the Goods, the property in the Goods will not pass to the Purchaser and the Company
will retain title to such Goods until the Purchaser’s indebtedness to the Company has been
discharged in full.
3. Until all monies are paid in full, the Purchaser will hold Goods delivered by the Company
on a fiduciary basis as Bailee for the Company and should any such Goods be re-sold by
the Purchaser, the Purchaser will hold the proceeds of such sale on a like fiduciary basis
on the Company’s behalf until the total amount of the Purchaser’s indebtedness has been
discharged.
4. Until such time as the property in the Goods pass from the Company, the Purchaser will
upon request deliver up such of the Goods as have not ceased to be in existence or been
re-sold, to the Company. If the Purchaser fails to do so, the Company may enter any premis-
es owned, occupied or controlled by the Purchaser where the Goods or any item thereof is
situated and re-possess the Goods.
9. INSPECTION/SHORTAGES
1. The Company will have no liability for any damage or shortages that would be apparent on
careful inspection by the Purchaser unless a written complaint is delivered to the Company
within seven days of delivery, detailing the alleged damage or shortage and the Company
is allowed access to inspect the affected Goods before any use is made of them.
2. Subject to Condition 9.1. the Company will make good any shortage in the Goods for which
it is responsible and where appropriate repair or at its option replace any Goods damaged
during loading or unloading by the Company, but otherwise will be under no liability what-
soever arising from such shortage or damage.
10. DEFECTIVE GOODS
1. The Company’s liability in respect of any defect or failure of the Goods supplied or for any
loss, injury or damage attributable thereto is confined to making good by replacement or
repairing any defects in the Goods themselves arising from faulty design or workmanship
on behalf of the Company.
2. The Company’s liability is further limited to defects reported to the Company in writing
within 14 days from the date of despatch of those Goods to the Purchaser by the Company.

3. The Purchaser will assume responsibility for the Goods being of sufficient suitability and
quality for the Purchaser’s purpose.
4. The use of recycled materials can cause variations in the Goods, especially colour variation,
efflorescence, overflow ridges, pores, shrink holes and surface fissures, in respect of which
the Company accepts no liability whatsoever.
11. SAMPLES
1. Notwithstanding that any sample may be exhibited and inspected by the Purchaser to en-
able the Purchaser to judge the quality of the Goods, it will not constitute a sale by sample
under the contract.
2. Any samples exhibited under this clause will remain the property of the Company and will
be returned immediately on request.
12. FORCE MAJEURE
1. The Company will not be liable for any failure to carry out its obligations arising from cir-
cumstances outside the Company’s reasonable control.
2. Non-exhaustive illustrations of such circumstances included Acts of God, war, riot, explo-
sion, abnormal weather conditions, fire, flood, strikes, lock-outs, government action or reg-
ulations (UK or otherwise), delay by suppliers, accidents and shortages of materials, labour
or manufacturing facilities.
3. If the circumstances preventing the performance of the contract are still continuing three
months after the said circumstances have arisen, then either party may give written notice
to the other cancelling the contract and neither party shall be under any further liability to
the other except that the Purchaser will be liable to pay the contract price less a reasonable
allowance for what has not been performed by the Company.
13. SEVERANCE
If any term herein will be held to be void or unenforceable for any reason whatsoever, but
would be valid if part of the wording were deleted, then the term will apply with such modifi-
cation as will make it valid and effective whilst preserving to the maximum extent its intended
effect.
14. PROPER LAW AND JURISDICTION
The contract will be governed by English Law and any dispute or action arising out of these
Conditions or related to the substance of other otherwise in connection with these Conditions
will be subject to the exclusive jurisdiction of the English Courts.
15. HEADINGS
The headings of these Conditions are for convenience only and will have no effect on the in-
terpretation.
MARCH 2016
WARRANTY FOR hanit®
RECYCLED PLASTIC PRODUCTS
1. DURATION OF WARRANTY
For orders starting from 01 January 2011 HAHN KUNSTSTOFFE GMBH guarantees that
hanit® plastics recycling products are delivered free of material defects and will not show
any for 15 years after delivery. Colouring is not a part of this warranty.
2. VALIDITY OF WARRANTY
This warranty shall only be valid for countries of the European Union.
3. MATERIAL PROPERTIES OF HANIT® PLASTIC RECYCLING PRODUCTS
Plastic recycling products may show variations in colour and dimension (up to 3%).
Recycling products may show production-related textured surfaces, inclusions, and
cavities. Due to this, the given weight and dimensions are approximate only.
4. WARRANTY CONDITIONS
We will replace hanit® plastic recycling products after thorough inspection, should our
goods be found to be defective during the warranty period in spite of proper application
and use (Replacement Delivery Guarantee).
Installation and application of our products according to assembly and installation
instructions on hand are a prerequisite for warranty adjustments.
Any reimbursements of transport costs, installation, re-installation, consequential damage,
disassembly, or other costs are excluded from this warranty.
5. WARRANTY HANDLING
For correct and speedy processing in case of a warranty claim, please contact us in writing
and include the following documentation:
- a copy of the invoice
- a detailed description of the defect
- photos and/or a sample of the faulty product
6. EXCLUSION OF WARRANTY
The following items do not constitute warranty claims:
a) defects that can be ascribed to normal wear
b) defects like e.g. discolouration and expansion caused by weather and climatic conditions
c) defects caused by actions of the customer or third parties (improper use and assembly,
modification of the product, use of parts from other suppliers, inappropriate transport,
packaging, and storage).
d) second quality and remaining stock sales
e) custom-made products, industrial profiles, finished parts and systems
f) goods not manufactured by HAHN KUNSTSTOFFE GMBH / HAHN PLASTICS LIMITED
g) Reinforced posts, warranty for this product is restricted to 5 years.
7. PLACE OF JURISDICTION
The place of jurisdiction shall be the supplier‘s registered business address.
This warranty is valid in addition to our general terms of sales and delivery.
The laws of Germany shall apply exclusively. Hahn-Flughafen, 01.01.2015
IMPRINT
HAHN Plastics Ltd.
Rake Lane Swinton
Phone: +44 (0) 161 850 1965
Email: info@hahnplastics.co.uk
Web: www.hahnplastics.com
DESIGN
Werbeagentur zweipunktnull GmbH · www.zweipunktnull.de
COPYRIGHT
Reprinting, even of extracts, is prohibited without the written approval of HAHN Plastics
Ltd. and, where approval is given, the corresponding reference to the source must be
provided. The same shall apply to recording in electronic databases and reproductions on
CD-ROM.
MISCELLANEOUS
We cannot be liable for print errors. Subject to errors; we reserve the right to make any
technical changes and improvements. Printed colours may vary slightly from the originals.
All product illustrations alike. Product illustrations are not to scale.
PICTURE CREDITS
3D-models: zweipunktnull, Photos: Thorsten Gauls · www.gauls-die-fotografen.com,
Photostock: www.fotolia.de, www.istockphoto.com, 500px.com

THE CLEVER SOLUTION

QUANTITY ORDER NO. N £N W H O O N ON
ENQUIRY ORDER
PICK-UP DELIVERY
CONTACT FORM
HAHN Plastics Ltd.
Rake Lane Swinton
Phone: +44 (0) 161 850 1965
Email: info@hahnplastics.co.uk
Web: www.hahnplastics.com
HAHN Plastics
(North America) Ltd.
180 Northfield Drive West
Unit 4
Waterloo, ON N2L 0C7, Canada
Email: info@hahnplastics.com
Web: www.hahnplastics.ca
Our Sales Terms and Delivery Conditions apply, which
can be found here in the catalogue or on our website at
wwwhahnplastics.com
Customer number (if known)
Name / Local authority / Institution / Company Phone
Department Fax
Contact person Email
Street, house number
Post code, City
Place, date
Signature

Section 5 - Playground Equipment

Recommended

Recommended

More Related Content

Recently uploaded

Recently uploaded (20)

Featured

Featured (20)

Section 5 - Playground Equipment