Take 5 Feedback is a comprehensive cloud based safety monitoring system for organisations to track important indicators such as temperature, movement, humidity and pH.
2. Upgrade your safety monitoring
and get ready to...
Reduce time Reduce paperReduce risk Reduce Cost
3. 3. Admin
Data is received from installed sensors where it can
be analysed and reported on as well as send alerts
back to locations in breach of set thresholds..
1. Automated Sensors
Choose the assets that you would like to monitor and
attach the appropriate sensor.
2. Gateway
Sensor information is received via RF frequency
instantly by a gateway connected to any internet
enabled PC or POS system.
How feedback
works
5. Refrigerated temperature monitoring
The success of any vaccination program depends on
the potency of vaccines when they are administered
to patients
A cold chain management system for the storing of
vaccines must keep vaccines within the safe
temperature range of 2–8ºC
Health services must have procedures are in place to
check and record the vaccine refrigerator temperature:
• at least twice daily
• on receipt of vaccines
• following a power failure
• hourly during outreach clinics.
Source: National Vaccine Storage Guidelines - Strive for 5 - 2nd Edition
6. Water temperature monitoring
Legionnaires' disease is a potentially fatal type of
pneumonia, contracted by inhaling airborne water
droplets containing viable Legionella bacteria.
Where nutrients are available, the bacteria multiply at
temperatures between 20-45°C and at pH levels
between 5.5 to 9.2.
Following a recent Legionnaires outbreak, every tap,
shower and water system in every Queensland
Hospital was tested.
8. 1. Sensors
Temperature sensors are installed directly into
refrigerated appliances by running a small
probe through the door of the unit.
2. Gateway
Sensor information is received via RF frequency
instantly by the gateway connected to a an internet
capable PC. A single gateway can support up to 30
sensors depending on the distance needed to cover.
3. Admin
Data is received from all sensor
locations where it can be analysed and
reported on. Customisable alerts can
also be created and sent to designated
staff if thresholds are breached.
Refrigerated temperature monitoring
9. 1. Sensors
Temperature sensors are installed directly into
pipe system by way of a T-Junction fitting.
The third outlet is used to screw the sensor
directly into the pipe ensuring that pressure is
maintained without the risk of blow outs.
2. Gateway
Sensor information is received via RF frequency
instantly by the gateway connected to a an internet
capable PC. A single gateway can support up to 30
sensors depending on the distance needed to cover.
3. Admin
Data is received from all sensor
locations where it can be analysed and
reported on. Customisable alerts can
also be created and sent to designated
staff if thresholds are breached.
Water temperature monitoring
11. Stay in the loop
Take5 Feedback’s live wireless
monitoring and cloud based
command centre provides accurate,
up-to-the-minute records for all your
monitored assets around the clock.
12. Customised alerts
Rest easy with the knowledge that
the right person in your organisation
will be alerted if something is not as
it should be
13. Streamline
your reporting
Desktop auditing and reporting made
easy through our real time feedback
platform. Organisation performance and
records can be compared to KPIs at
regional, divisional and corporate levels,
helping managers and auditors quickly
identify and improve problem areas.
14. Secure data
Data is streamed constantly to you
via our secure cloud command
centre or directly through your
internal network.
15. Easy access
Take5 Feedback can be
accessed across a wide range of
platforms including point of sale
devices and mobile devices.
16. Clean and
effective
Take5 Feedback hardware
has been designed around
hazardous, challenging food safe
and clinical environments. Our
remote sensors and probes will
meet any compliance level and are
easily maintained.
18. 1 month trial for refrigeration
temperature monitoring
2 temperature monitoring sensors placed in refrigeration units on 1 ward.
This trial is aimed at demonstrating the benefits of automated temperature
monitoring.
What you get
1. installation
2. account setup/support
3. Unlimited users
4. Sensor heartbeats set
at 10 minutie intervals
5. out of range Alerts
Free of charge
23. Contact us @
t: 0406 420 808
e: hello@engineroomapps.com.au
a: Suite 170/a Hay St, Perth, Western Australia, 6000
Find out more @
www.take5feedback.com