2. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 2
CADISON® combines the engineering workflow in one system and thus significantly accelerates the planning processes. All users can see on their workplaces - either graphically or as schematic, as 3D model or text-based in a
tree structure – the same data and objects in each case so that they can be optionally used and modified on all workplaces through simple Drag & Drop.
Data and/or objects are existing once only. Thus errors as a result of redundant data management are excluded. The
sophisticated right system ensures that tasks are handled selectively. Modifications introduced by other users are
immediately made available to all other users. The continuity of the individual work steps in one object-oriented
database forms the core of the CADISON® technology. CADISON® uses the widespread platforms Autodesk AutoCAD
or Microsoft Visio for graphical presentations.
Increase Your Competitiveness
CADISON® – The Object-Oriented Engineering Solution for Plant Construction
Higher competitiveness is a challenge to be
met with every day. Many interfaces and transmission errors may cause higher expenses,
longer project implementation time and, thus,
smaller profit margins.
Integration of the complete engineering process
is indispensable in order to solve this problem
and to implement the project more efficiently
than before. Only a short time before, the use of
pure CAD systems had been accepted as the
right way for safeguarding competitiveness but
today it is more and more necessary to change
over to the next stage of optimization, i.e. to integration of the complete engineering process.
Today accelerated project implementation
means that you should use the valuable and
rare energy resources more efficiently. Thus
your products can be introduced on the market
within a short time.
CADISON® unifies the engineering workflow,
makes it easier and accelerates the planning
process significantly.
The common object-oriented data model for the different fields of application (tender planning, process engineering,
installation planning, pipeline planning, electrical engineering, instrumentation etc.) makes it possible to integrate all
planning phases so that time and costs are saved. CADISON® serves to collect valuable information in the tendering phase already so that staff members have the required data available in all later phases of project handling.
Highly Flexible and Object-Oriented Data Model

3. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 3
Due to its simple and modular design and its easy to learn surface CADISON®
may be adapted to user specific requirements in a task-related way. The latest
state-of-the-art technology ensures that your decision in favour of CADISON® is
correct and your investments will be profitable in the long run.
Since all modules have access to the same integrated data model, all modifications in CADISON® are immediately and automatically displayed in all desired
“views” and updated within the projects. Thus, potential failure sources can already be previously eliminated.
Modifications in All Modules are Available Immediately
Universality from preparation of quotation, P&ID and 3D-Planning up to instrumentation/electrical engineering forms the core of the CADISON® technology.
Of course, the own catalogue system MATPIPE of CADISON® supports this
workflow process.
While working in the framework of this workflow it is without importance if you
want to acquire the engineering basic data at first or immediately change over
to graphical planning. The object-oriented data model provides data and objects
in each module in the required view so that you can implant them in your work
window through simple Drag & Drop.
Workflow – From Quotation up to Maintenance
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
“Even large-size plants with a rather
high data volume can be loaded and
processed within a reasonable time –
this is the result of the ‘slim‘ special
structure of this plant design tool.”
Dipl.-Ing. Jens Willumeit,
Project Manager
Oerlikon Neumag
“With CADISON® we are always sure
that calculation and preparation of quotations are in correspondence with the
current planning situation.”
Andreas Hiegelsberger
Project Manager of Process
Technology, LTH Dresden
100%
Many satisfied customers and projects completed successfully may demonstrate
that you may profit from up to 50% of time and cost saving through use of the
“Integrated Digital Plant Model – CADISON®“.
“The complete project flow is shortened
by means of CADISON® since the individual task groups may work in parallel.”
Carsten Kollenbach
Managing Director
VPT Kompressoren
Business Benefits
· Higher competitiveness and added value
· Continuous engineering solution – From quotation up to maintenance
· Parallel work in the same project – Multiuser capacity
· Easy integration into the business workflow of your company (ERP, stress calculation, document
management etc.)
· Open standards and state-of-the-art technology give you a maximum of investment safety

4. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 4
Integrated Digital Plant Model
CADISON® Project-Engineer: The basic tool of process engineer and project manager. You may design and calculate your plant graphics-independent so that deeper detailing is possible again in the following stage. This is
what we call “Conceptual Engineering”.
CADISON® Project-Navigator: The Project-Navigator is a pure
“Viewing Tool” for your access to all engineering data of your projects. It has the same surface like the Project-Engineer and is an
indispensable tool for operation and maintenance of your plant.
CADISON® P&ID-Designer: The CADISON® P&ID-Designer
plays a decisive role in design, construction, commissioning
and maintenance and has an enormous effect on the
complete lifecycle of a plant. In this case the preliminary project
engineering will be integrated with Basic and Detail Engineering
and 2D layout planning.
PID-Designer for Visio®: The PID-Designer for Visio®
plays a decisive role in design, construction, commissioning and maintenance and has an enormous effect
on the complete lifecycle of a plant. Low costs of Microsoft
Visio and the known easy handling of the system are decisive
advantages for preparation of P&ID’s.
®
m
CADISON® Electric-Designer: Preparation of planning documents for instrumentation, power plants and control but also installation and process measuring and control technology are in
the competence of the electric design engineer. The common data
base permits at any time the access to information about all trades involved in
the project such that planning of electrical engineering can be combined with
planning of process engineering.
N
ISO
CAD
CADISON® 3D-Designer: Installation and pipeline
planning in the 3D model are in the competence of the
3D-Designer. Normally this module is used for access to
data from Basic Engineering or P&ID. Efficient assistants are
available for installation planning: For instance, isometrics can be
automatically generated from the planned pipeline systems.
od
CADISON® MATPIPE: Independent module for development and management of
pipe classes, creation of parameterized 3D components, preparation and integration
of manufacturer catalogues, import and export of data plus examination of existing
catalogue data to ensure up-to-dateness.
ul
es
© Julius Montz GmbH
– generated using CADISON® techn

5. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 5
CADISON® Engineer2Web: Use your webbrowser online for direct access to all CADISON® project
data. Provided you are authorized to do so, you may not only view project data with Engineer2Web
but also modify existing data and structures or create new ones. This is the ideal access feature for maintenance and site personnel and for “pure data consumers” not involved in the
planning process.
CA
D
®
ON
IS
CADISON® Archiver: The CADISON® Archiver allows you to swap and archive complete projects from the CADISON® productive environment. Archived projects can
be rapidly and easily viewed with the CADISON® Archive-Browser without the
need to retrieve them from the productive environment. Information about
documents in projects completed before plus knowledge from experiences
remain directly accessible.
ad
nm
d-o
es
odul
CADISON® ERP-Interface: The bidirectional CADISON® ERP-Interface
combines ERP and engineering workflow for creation of a highly integrated system. For instance, orders can be directly released from the
engineering workflow and even controlled. During plant operation the
technical specifications can be adjusted and the maintenance processes
can be initiated. Company-specific standards may be presented
individually.
CADISON® ROHR2-Interface: The ROHR2-Interface of CADISON®
makes it possible to transmit all pipeline systems created with
CADISON® 3D-Designer to the calculation programme ROHR2. All
required information will be completely transmitted to ROHR2 in
the form of NTR files for analysis. Weak points are recognized and
can be iteratively eliminated.
CADISON® Maintenance: CADISON® Maintenance is the solution
for lifecycle management in plant construction and maintenance.
This module makes it possible to fix essential data like maintenance intervals already in the planning phase, so that data are
accessible later for use by your technical and service staff. You
may automatically create lists for the maintenance staff (even with
an offline version) while modifications are brought back to the life
system again.
CADISON® Steel: Use CADISON® Steel to rapidly and easily create
your steel construction in the 3D model “around the 3D plant”.
Comprehensive component libraries are available, such as steel
sections, staircases and railings etc. Apart from automated derivation
in 2D workshop drawings, planning can be transmitted via a standardized interface directly to stress analyst and production division.
CADISON® Navisworks: Through integration of almost all known graphics formats Navisworks turns out to be the ideal tool for Design Review
Meetings and Highend Visualizations. Navisworks presents complete project real-time views for efficient 3D coordination, 4D planning, photo-realistic
visualization and dynamic simulation. Navisworks is the standard tool for
detection of collisions with other trades. Apart from graphics, CADISON® object
information is made available.
© Julius Montz GmbH
ted using CADISON® technology –
CADISON® Application Programming Interface (API): The CADISON® API allows
you to optionally integrate your CADISON® engineering workflow in your business workflow. CADISON® API offers you a high rate of flexibility – not only for external access to data,
contents, structures and points of view of CADISON® but you can use it even for
dynamic data exchange. New objects can be generated and existing objects can be modified or
even deleted. Thus you have a new quality of openness and accessibility of database content.
CADISON® API can be used by all customers as free-of-charge supplementary module.

6. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 6
CADISON® – the Digital Process Chain
Continuity of Project Data Saves Time and Costs
All participating parties may use data and objects in all modules at any time. Modifications will be immediately visible for all participants so that they are available. The question which modules are used for project handling is only
dependent on the requirements of the respective planning process and independent of the selection between graphics-oriented or structure-oriented work.
CADISON® Modules in Practical Application:
· Process and project engineers use the CADISON® Project-Engineer for structuring of plants and
detailing of technical and commercial data
· Project manager and plant operator can view the planning data documentations with
CADISON® Project-Navigator or CADISON® Engineer2Web
· Planning engineers preparing P&ID’s use the CADISON® P&ID-Designer or the PID-Designer for Visio®
for preparation of block flow charts and also for detailed P&I diagrams
· Installation and pipeline planning engineers use the CADISON® 3D-Designer for true-size
3D planning and even for derivation of isometrics
· Planning engineers for process measurement and control and electrical engineers establish
the concrete instrumentation and even line routing and control cabinet planning by means
of CADISON® Electric-Designer
· Technical staff responsible for selection of components and pipe classes use CADISON® MATPIPE
for creation of project and company standards for use by all trades involved in planning work
· The operators use CADISON® Maintenance for management of maintenance and for fixing
the intervals of recurrent maintenance cycles and tests
· Business integrators use CADISON® API for integration of engineering workflow in the corporate workflow
Supplementary modules for documentation and object administration, visualization, ERP integration, maintenance,
steel construction and interfaces for the calculation procedure (ROHR2) are complementing CADISON® so that a
complete system is available.
Based on the principle of object-related data management, modifications in project data are immediately applicable to all objects, drawings and
reports. CADISON® ensures that such data are updated automatically. Data are presented in the form
needed by the respective user – independent of the
module just used for work. This means easy operation and high acceptability for the user.
Thus CADISON® helps you to save valuable working time and to decisively increase your productivity. The check-in / check-out technology proved to
be a very efficient technology for joint work in plant
engineering. All users may “check out” definite plant
components on the basis of optional criteria (such
as logic plant components) so that they are protected against changes made by others. After that,
these items can be processed “exclusively”.
© Julius Montz GmbH
Updating of All Project Data
All companies have their own “standards” where the company requirements but also the customer’s requirements
are considered. The rule-based object model makes it possible that you can adapt CADISON® yourself to practically
all your individual needs. Normally you can yourself accomplish these company-specific adaptations – called “Customizing”. In case you need assistance we would be pleased to help you make your Customizing.
Customizing to Company Standards
The continuous further development of CADISON® – on the basis of strategic alignment of ITandFactory and naturally of customer desires – ensures that your company will profit from new functionalities and optimization potentials. Our customers automatically receive our latest CADISON®-Releases as major and minor updates on the basis
of a service agreement and get support via our CADISON®-Hotline.
Further Development and Service

7. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 7
Partnership with Autodesk and Microsoft
Our close partnership with Autodesk offers you a modern CAE integration for different AutoCAD platforms. You may
profit from most simple operation and maximum compatibility. Almost all AutoCAD users may immediately start their
®
work with CADISON .
To pass to our customers further cost advantages in combination with time savings in the planning-phase, we have
developed PID-Designer for Visio®. Thus you can work on the basis of the known and widely spread Microsoft Office
Platform and use all advantages you can derive from this platform.
Object-Oriented Database VERSANT (ODBMS)
VERSANT ODMBS is the motor for data management in CADISON®. Only this object-oriented database makes it
possible to obtain redundancy-free objects. Since the integration level in CADISON® is very deep, maintenance efforts are reduced to minimum.
DB-Client Access License (CAL)
For operation of CADISON® it is required to have one data base Client Access Licence (DB-CAL) on each workplace.
Therefore, one CAL is needed per workplace during the operation time – independent of the number of installed modules.
For contact – Our locations and our international distributors
Head Offic e B ad S oden:
ITandFactory GmbH · Auf der Krautweide 32 · 65812 Bad Soden · Phone: +49 6196 6092-310
info@ITandFactory.com
K refeld:
ITandFactory GmbH · Alte Friedhofstraße / Building L222 · 47829 Krefeld · Phone: +49 2151 5163 277
Krefeld@ITandFactory.com
S t. P ölten:
ITandFactory GmbH · Heinrich-Schneidmadl-Straße 15 · 3100 St. Pölten · Phone: +43 2742 9001 3110
St.Poelten@ITandFactory.com
Head Offic e R heinfelden:
ITandFactory AG · Quellenstrasse 37 · 4310 Rheinfelden · Phone: +41 61 833 3050
Rheinfelden@ITandFactory.com
R einach:
ITandFactory AG · Kägenstrasse 18 · 4153 Reinach · Phone: +41 61 338 3232
Basel@ITandFactory.com
C anton: Phone: +1 734 459 1100 · Sales.USA@ITandFactory.com
L uton: Phone: +44 1582 455 559 · Sales.UK@ITandFactory.com
Neilsoft India:
Pune: Neilsoft Ltd · Pride Parmar Galaxy 8th Floor, 10/10 + A Sadhu Vaswani chowk. 411001
Phone: +91 20 2605 3003 · Fax: +91 20 2613 1755 · pune.sales@neilsoft.com
Bangalore: Neilsoft Ltd · 406 Embassy Centre, 11 Crescent Road, Kumara Park (E). 560001
Phone: +91 80 2226 7786 · Fax: +91 80 2237 4189 · bangalore.sales@neilsoft.com
Chennai: Phone: +91 44 2811 4247 · chennai.sales@neilsoft.com
Mumbai: Phone: +91 22 6770 2737 · mumbai.sales@neilsoft.com
Delhi: Phone: +91 11 4108 6157 / 58 · delhi.sales@neilsoft.com
Martorell: Phone: +34 93 774 4474 · Spain@ITandFactory.com
Mailand: Phone: +39 02 48300930 · Italy@ITandFactory.com

8. CADISON_Broschu?re_R10_12-10_EN:Broschuere
20.12.2010
18:53 Uhr
Seite 8
Business Benefits
Autodesk AutoCAD, Microsoft Visio are registered trademarks.
· Continuous planning throughout all disciplines –
Integrated Digital Plant Model
· Rapid and easy learning through uniform and ergonomic
user interface of all modules
· Multi-Site work of split project-groups (all modules)
· Full multi-language feature through Unicode
(e.g. simple change-over from English to Russian and vice
versa) and multilingual inscriptions
· Object-oriented data model with unique system architecture
· Redundancy-free ensured through clear object data management
· Safe access to the latest lists and reports
· Integrated tracking of all project-relevant modifications –
Configurable Management of Change
· Across-trades plausibility check
· High level of planning safety through rule-based work
· Project controlling in the engineering process
· Cost and time schedule control throughout the project
implementation period up to lifecycle management
CADISON® – Integrated Digital Plant Model
Media- and Mass-Balances > Basic Flow-Diagram > Tender Planning > Process Flow-Diagram > Equipment List > Prelimary Layout > Specifications and Suppliers > Instrumentation > Ressource Management > Calculation > Revision-Management > Project-Analysis >
Process-Calculation > Pipe-Specification > P&I Diagram > Specification for Inquiry > Structural/Statics > Layout Planning > Installation Planning > Equipment Planning > Structural and Piping Design > General Arrangement Drawings > Piping Design > Piperack Layout > Electrical
Design > Report Extraction (BOM) > Materials Management > Maintenance and Operations > Post Costing Analysis and Documentation
ITandFactory is one of the largest providers of complete solutions in the field of process
engineering. Being a joint venture of the companies Neilsoft Ltd. (India) and TRIPLAN
AG (Germany) – both companies known as reputed engineering undertakings – we
understand ourselves as solution provider supplying our customers with solution and
process-oriented IT tools plus associated concepts.
Higher efficiency in plant planning, integration of plant construction and intelligent plant
documentation with high-efficiency IT tools are in the focus of our CAE solution
CADISON®. The growing international orientation of our organization creates synergetic
effects with the cross-linked and global way of thinking of our customers. It is our target
to ensure a maximum benefit for the customer through utilization of latest technologies.
Our customers may profit from a maximum return-on-investment.
Information and possibilities to purchase:
ITandFactory GmbH · Auf der Krautweide 32 · 65812 Bad Soden · Germany
Phone: +49 6196 6092-310 · Fax: +49 6196 6092-202
info@cadison.com · www.cadison.com
© ITandFactory GmbH, Layout: ABE/enz, 12/2010
[ faster to market: cadison.com ]