ChengLi special Automobile Co.,Ltd provides a quotation for an ISUZU 3 ton water tank fire fighting truck. The truck has a 2000kg liquid loading capacity, 95km/h maximum speed, and 20L/s fire pump rated flow. The chassis is an ISUZU QL1070A6KWY with a 2999cc engine. The truck has a 2000L water tank made of 3mm carbon steel and includes a water pump, piping system, car water cannon, fire control system, electrical equipment, and firefighting tools. The quotation price for the fire truck is USD 25,491 CIF Yangon, Myanmar port.

1. 程 力 专 用 汽 车 股 份 有 限 公 司
ChengLi special Automobile Co.,Ltd (Manufacurer )
Address: South Suburb Cheng Li Automobile Industry Park,,Suizhou City, HuBei province, China.
QUOTATION
ISUZU 3 ton water tank fire fighting truck
1.Vehicle description
Outside
dimensions
6350×1980×2750mm
Maximum total
mass
6545kg
Liquid loading 2000kg
Maximum speed 95km/h
Fire pump rated
flow
20L/s 1.0MPa
Fire monitor rated
flow
20L/s 1.0 M Pa
Fire monitor range ≤ 48m
Specific power 72/6.545=9.5
Approach /
departure angle
24°/14°
Second, the chassis
1. Main parameters of the chassis
model QL1070A6KWY
manufacturer ISUZU Motors Co., Ltd.
Engine rated 72kw

2. power
engine capacity 2999ml
Engine emission
standards
Eruo 4
Drive form 4×2
Wheelbase 3360mm
Maximum
allowable total
weight
6745kg
Minimum turning
radius
≤14m
Gearbox Manual
power takeoff YTQ200
2. Crew room
structure Flat head, four doors, original double row
Number of
passengers
2+3 people
Driver position Left
equipment The instrument panel of the original vehicle
is equipped with a fire-fighting operation
instrument panel and a warning light control
box, which are installed
1. Alarm;
2. Power take-off control switch and
indicator light;
3. Additional power switch;
Third, the structure and performance parameters of the top
General
layout
The vehicle is composed of two parts: the firefighter's cabin and the body. The body
layout adopts an integral frame structure, with a built-in water tank, equipment boxes on
both sides, a water pump room at the rear, and the tank body is a parallel cuboid box
tank.
1. Equipment box and pump room
structure
The main frame structure is welded with
high-quality square pipes, and the outer
trim plate is welded with carbon steel
plates. (Aluminum alloy square tube

3. welding can be used according to user
requirements)
Equipment
box
The equipment box is located at the rear
of the passenger compartment, with
aluminum alloy rolling doors on both
sides, and lighting lamps inside. There
are storage boxes in the equipment
compartment according to requirements.
Pump
room
The pump room is located at the rear of
the vehicle. There are aluminum alloy
rolling doors on both sides and back, and
there are lights inside. Some common
equipment can be placed on both sides of
the pump room.
Heat preservation position: install fuel
heater (optional according to customer
requirements)
Ladder
and car
handle
The rear ladder is made of aluminum
alloy two-section flip ladder. When used,
it should not exceed 350mm from the
ground. The handle of the car is made of
a grooved non-slip round steel pipe with a
surface spray treatment.
2. Water tank
capacity 2000kg
Material
High-quality carbon steel with a thickness
of 3mm (can be made of stainless steel
and PP according to user requirements)
Tank
fixing
Flexible connection with chassis frame
Tank
settings
Manhole: 1 DN460 manhole with quick
lock/open device
Overflow port: set 1 DN65 overflow port
Remaining water outlet: set a DN40 water
tank to discharge the remaining water
outlet, equipped with a ball valve
Water injection port: connect 1 DN65 port
on the left and right sides of the water
tank
Water inlet and outlet: set 1 water tank to
the water pump inlet pipe, DN100 valve,
which can be controlled pneumatically
and manually, set 1 water pump to the
water tank filling pipe, DN40 valve, which
can be controlled pneumatically or
manually

4. Four, water system
1. Water pump
model CB10/20 low pressure vehicle fire
pump
form Atmospheric centrifugal
Limited Data 20L/s @1.0MPa
Rated outlet
pressure
1.0MPa
Maximum suction
depth
7m
Water diversion
device
Comes with sliding vane pump
Water diversion
time
When the maximum suction depth
is ≤35s
2. Piping system
Pipe material High-quality seamless steel pipe
Suction line
There is a DN100 suction port on the back of the
pump room
Water
injection
pipeline
There is a DN65 water injection port on the left
and right sides of the water tank, and a DN65
water pump is installed in the pump room to inject
water into the tank.
Outlet
pipeline
There are 1 DN65 water outlets on the left and
right sides of the pump room, with a stop valve
and a cover
Cooling water
pipeline
Cooling water pipeline and control valve equipped
with cooling power take-off
Five, fire extinguishing device
1. Car water cannon
model PS20W
manufacturer China
Rotation angle 360° horizontal rotation
Maximum
elevation/depression
angle
Depression angle ≤-15°, elevation angle
≥+45°
flow 20L/S
Range ≥48m
Six, fire control system
The control panel mainly includes two parts: cab control and pump room control
In-cab control Water pump off gear, warning light
alarm, lighting and signal device
control, etc.
Pump room
control
Main power switch, parameter display,
status display
Seven, electrical equipment
Additional
electrical
Set up an independent circuit

5. Auxiliary
lighting
The fireman’s room, water pump room and
equipment box are equipped with lights, and the
control panel is equipped with lights, indicator
lights, etc.
Strobe light Red and blue strobe lights are installed on both
sides of the body
Warning
device
Long row of all red warning lights, installed on the
top of the cab
Siren, its control box is below the driver's front
Fire lighting 1 35W fire searchlight installed at the rear of the
bodywork
8. Surface treatment
Topcoat High-quality domestic paint
colour The main color of the outer surface of the car body is RO3 fire red
IX. Arrangement and equipment of onboard fire fighting equipment
1. Equipment layout
1
According to the actual fire fighting needs, according to the fire operation procedures, pick
and place nearby.
2 Use special fixtures that prevent rust, vibration, fall off and scratches.
3 The mark is eye-catching, multi-person operation, non-interference.
2. Equipment (standard)
1 straw 100 × 2 meters 4 root Threaded
3 Trap FII80/65 × 2-1.6 1 Piece Internal button
4 Water trap JII100/65 × 2-1.0 1 Piece Internal button
5
Hose 13-65-20 6 plate Low pressure; internal
button
6
Hose 13-80-20 2 plate Low pressure; internal
button
7 Reducing interface KJ65/80 2 Piece Internal button
8 Hose cloth DT-SB 4 Piece
9 Hose hook 4 Piece
10
Ground fire hydrant
wrench
QT-DS1 ; length 400 1 Piece
11
Underground fire hydrant
wrench
Length 860 1 Piece
12 Suction pipe wrench FS100 2 Piece
13
DC switch water gun QZG3.5/7.5 ; 65 1 support Low pressure; internal
button
14
DC Flower Water Gun QZK3.5/7.5 ; 65 1 support Low pressure; internal
button
15 Fire bucket 1 A
16 Fire extinguisher 3 ㎏ 1 With
17 Fire waist axe Length 390 ; GF-285 1 Piece
18 Rubber hammer 1 Piece
19
Rechargeable portable
lighting
1 Piece

6. Quotation: CIF Yangon,port,Myanmar USD 25491/set

7. Detailed Images

10. Our Services

11. 1, 12 months whole vehicle warranty
We could support you original spare parts. Besides, we can give assistance in the following days by email or
telephone. If necessary, our outwork engineer could go for technical assistance.
2,We will provide customers with the mos economical design according to the loading equipment and the
payload.ODM & OEM customize, professional and technical team provide you the best design , free logo
print.Trailer assembled under strict quality control, any process is inspected .
3,With years of export experience along with excellent quality, advanced services and competitive prices,
Chengli truck has won numerous customers' trust and support.
4,Packaging Details : nude , covered with wax, small type can be put into 20'GP OR 40'GP container , over
sized can be carried by bulk carriers or ro-ro ship , or according to your requirements.
5. Right/Left hand drive, with A/C, single row or one and a half rows with sleeper.
About our company:
Chengli Special Automobile Co., Ltd has nearly 16 years’ history since 2004, where the
first heavy duty truck was produced in China.

13. FAQ
1. Does your company has your own factory?
- Yes, we have a factory ourselves,which is in this business for 12 years in China. Our factory is very famous
where is manufacturing various trailers in ShanDong, China.
2. Can you satisfy my special requirement?
- Definitely! We can make the trailers based on your requirement.
3. What’s your minimum quantity?
- Min.1set
4. How to trust us?
- The good faith management is our philosophy, and you are welcome to visit our company at any time.
5. What’s your payment term?
--- T/T: 30% deposit by T/T, 70% balance should be paid before shipment.
--- L/C: 100% irrevocable credit of letter.
Company Alibaba homepage link:https://www.wltrucks.com/