 Use a stick once to prevent cross contamination  Try to not over saturate the cleaning stick with cleaning fluid  Stay away from cotton swabs - they leave loose fibres behind

1. Best Practice Recommendation
3 Steps for Effectively Cleaning Optical Connectors With A Stick
TIP: You only need a small amount of the cleaning fluid to get the best results!
For more information or technical support, email me at briant@microcare.com
STEP 3
Insert the stick into the adapter
and rotate 6x in SAME direction
STEP 2
Tilt can slightly, pump the cap, and
insert stick into caps’ side port
STEP 1
Take just one stick out of the
package