This document summarizes the key features of a transport and drilling rig. The rig is self-erecting, has auto assistance for rig up, and can transport with a kelly bar installed in a single load weighing less than 43 tons. The main drilling features include a main winch with a 160kN first layer line pull and maximum drilling depth of 32 meters on the first layer. It also has a two-speed rotary table with a maximum drilling speed of 51 rpm.

2. Main Features in transport mode
Self erecting
Auto assistance for the rig up
Expandable crawler 2500/4000 mm
Remote console for tramming
(CE version or optional)
Transport in one load with kelly bar on,
Weight less than 43 ton (95.000 lbs)

3. CPD overall dimensions

4. Main Features in drilling mode
Main winch first layer line pull : 160 kN,
max drilling depth on first layer 32 m
Service winch : 72 kN
Two speed Rotary table :
19 kNm (140.137 lbf-ft)
Drilling speed: max 51 rpm
Spin-off speed: 125 rpm

5. Drilling features

6. WPD features

7. WPD kelly

8. CFA quick

9. CPD features

10. CPD

11. CFA

12. DP Displacement Piles

13. CPD kelly bar chart

14. Rotary

15. Main Features
One stage gear box reduction
Low hydraulic motor speed
Low noise
MGS system upon request
AGS system
Easy fitting and replacing kelly bar
guiding ribs

16. Rty diagram 35 MP

17. Rty diagram 35 MPa non-electronic

18. Rty mix diagram 35 MPa

21. CUMMINS QSB 6.7
EU STAGE IV /US EPA TIER 4F

22. CUMMINS QSB 6.7
EU STAGE IIIA / US EPA TIER 3