JOHN DEERE 7200R 7215R 7230R 7260R 7280R TECHNICAL SERVICE PDF MANUAL 2680PGS...
oil level transmission checking
1. 34-39
Oil level in transmission,
checking
Note:
When checking the oil level in the transmission,
the vehicle should be standing on a perfectly
horizontal surface. An inspection pit or a 4-post
lifting platform is ideal.
The prescribed oil level is to be adhered to
exactly; the transmission reacts very sensitively
to over-filling.
If a transmission with transmission oil cooling
(e.g. 2.7 ltr bi-turbo) has been removed, the
vehicle must be driven a short distance on the
road before checking the transmission oil level.
Vehicles with V6 bi-turbo engine
- Remove oil filler plug -B- (in front of drive flange) to check transmission
oil level.
- Check oil level with a suitable tool (such as a length of wire bent to
shape).
Specification: oil level 7 mm 1 mm below bottom lip of oil filler
hole.
- Fill up with gear oil if necessary. Specification Page 00-3 .
Page 1 of 2Oil level in transmission, checking
11/19/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.TM03.34.3
2. Tightening torque
Oil filler plug: 40 Nm
- Fit oil filler plug.
Page 2 of 2Oil level in transmission, checking
11/19/2002http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.TM03.34.3
