1. Bilal Marwan Abou Gouche
Contact Details
Mobile : (+966)56.140.8417
E‐Mail : bilal_abougouche@hotmail.com
Address : Jeddah, KSA
Job Objective
Qualified Electrical Engineer with prior experience in testing and commissioning of electrical systems and
with an aptitude to lead a team and accomplish target oriented electrical projects.
Work Experience
Empower Contracting, Site Engineer
Duration: From 18th December 2010, till 25th of May 2015
Company Profile: A major contracting company held by Saudi Bin Laden Group‐CPC to carry out MEP works
on projects acquired by Saudi Bin Laden Group.
Major Projects
 Princess Nourah University (PNU)‐Riyadh‐Saudi Arabia
 King Saud Bin Abdulaziz University for Health and Sciences(KSAU‐HS) ‐Riyadh‐Saudi Arabia
 King Abdullah Financial District (KAFD)‐CMA Tower‐Riyadh‐Saudi Arabia
 King Abdullah Foundation Project (KAFP)‐SOFETEL‐Riyadh‐Saudi Arabia
Job Profile: Employed in Empower Contracting as Site Electrical Engineer and my responsibilities where:
 Recognize Electrical Works from the 1st fix stage to the final fix, including but not limited to the
followings:
‐ First fix of the Slab and Foundation Works, including installations of sleeves of the Builders
Works, as well preparing all requirements for Lightning and Earthing Protections
‐ Supervised installation of all First Fix and Second Fix Works related items
‐ Installation of Lighting and Power Systems as well Cables Installations and Pulling
‐ Perform Tests to confirm the validity of the installations, like Continuity and Insulations Testing
‐ Panels installations, Cable and Wiring Terminations, starting from MDBs to the Branch Panels,
along with all different types of Control Panels , MCCs and VFDs
‐ Wiring Devices and Lighting Fixtures installations and Termination
‐ Installation of the required BMS works to operate via DDC panels for electrical and mechanical
equipment
‐ As‐Built Drawings for all finished and approved works as well as for Electrical and Control
Panels

2.  Testing and Commissioning of Electrical Systems, including but not limited to the following:
‐ MDBs and its Electrical and Mechanical interlocks between its compartments and the Bus Coupler
‐ ATS and their Sequence of operation with the Generators, according to their steps of priority
‐ Commissioning of different HVAC equipments (AHUs‐Pumps‐Exhaust Fans‐Smoke Extraction
Fans….) together with BMS department, like Fire Scenarios and other interlocks and Dry Contacts.
‐ Lux, Polarity, and Earthing Resistance Tests
 Supervision Engineer for more than 12 Buildings in KSAU‐HS for the following systems:
1‐ Lighting Control System: EIB‐KNX and Conventional systems (Legrand and Leviton)
2‐ Emergency Central Battery System (ECB): CEAG‐Cooper
3‐ Fabrication, Modification, Troubleshooting of Electrical Panels and Motor Control Centers
(Fabricated more than 6 different types of Control Panels)
 Raise Requests For Inspections & Requests For Testing and ensure a smooth handover of the
projects at hand
 At all times, keep the client update about the progress of site work and there by ensure customer
satisfaction
Empower Contracting, Technical Engineer
Duration: From May 26 2015, till current day:
 Discrimination study for low voltage circuit breakers using Ecodial (Schneider software)
 Complete short circuit/Voltage Drop study using Ecodial software
 LUX level calculation using Dialux software
 Study and Design of Earthing and Lightning Protection Systems
 Derating factor calculation for all cable routing paths using IEC and cable manufacturers
standards to insure installations are efficient and safe
 Reviewing electrical design specifications and designed drawings for preparing shop drawings
 Preparing Shop Drawings for Lighting, Power, Cable Routing, Earthing and Lightining protection,
Panel Boards Schedules, and Single Line Diagrams
 Preparing Builders Works
 Prepare materials take off and give the technical support for the material engineers during the
procurement phase
 Carry out BOQ for all electrical systems
 Attending meetings, writing reports and giving presentation to managers
 Coordinating with different suppliers, client representatives, electromechanical & civil teams
 Preparing separate shop drawings for the Lighting Control systems, the conventional type and
the KNX/EIB showing all details and interfaces used with their Single Line Diagrams, likewise for
the Central Battery System

3. Free Lancer as an Internship Electrical Engineer
Duration: From June 2007, till September 2010
Supervising Works with Experienced Engineers for more than 20 private villas in West Bekaa‐Lebanon,
and my responsibilities included but not limited to the following:
‐ Performed the take‐off for all Electrical Materials that was required to complete the
projects, and auditing all design Electrical drawings to match site conditions
‐ Supervised all Electrical works, starting from slabs, to the first fix and wire pulling, till
energizing the buildings
‐ Successfully handed‐over more than 15 villas during the above duration
Key Skills and Competencies
 Excellent customer facing and communication skills.
 Strong decision making skills and ability to prioritize and plan effectively.
Computer Skills
 General: Microsoft Word, Microsoft Excel, Power point ,C++, Java
 Electrical Software: Plan Swift, Ecodial, DiaLux, DOC‐ABB, Auto Cad,Twido, KNX ETS4 software
Hobbies & Activities
 Swimming , Running, Hiking
 Watching Movies
Training Courses
 Certified KNX Partner conducted in ABB Training Center‐Jeddah
 Certified Adjustable Frequency Drive Commissioner by Johnson Controls held by Eaton‐Riyadh
Education & Personal Particularities
Bachelors of Science in Electrical Engineering: Lebanese International University (LIU), West Bekaa (2006‐10)
Schooling : Lebanese Official Bacc II, Jeb Jannine High School (2005‐06)
Date of Birth : 12.04.1988
Nationality : Lebanese
References:
‐Engr. Ghasssan Atallah –Senior Electrical Engineer (+966 50481 7140), more than 30 years of experience in
Gulf Countries
‐Engr. Shadi Serhal –Senior Electrical Engineer (+966 54661 8660), more than 12 years of experience as
consultant and in MEP contracting as well
Declaration
I hereby declare that the above mentioned information is correct to the best of my knowledge and I bear
the responsibility for the correctness of the above mentioned particulars.
Date: 15.3.2016 Place: Jeddah (Bilal Marwan Abou Gouche)