Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
General Presentation
1. The 3rd xx Cricket
Tournament
4th, 5th and 6th December 2010
Xxxxx Cricket Stadium
Abu Dabhi
2. … and the excitement!
XX welcomes all the participating offices to the 2nd inter-office
cricket tournament.
Organizing committee
From other xxx Offices
XXXXX
XXXXX
XXXX
Don’t miss the action …
Abu Dhabi office
XXXXXXX
3. Schedule
Day 1–19 December Ground 1 Time
1st Match Abu Dhabi vs. Riyadh 7:30 a.m.
2nd Match Muscut vs. Kuwait 10:45 a.m.
3rd Match Abu Dhabi vs. Jeddah 1:15 p.m.
Day 1–19 December Ground 2 Time
1st Match Jeddah vs. Bahrain 7:30 a.m.
2nd Match Al Khubar vs. Dubai 10:45 a.m.
3rd Match Riyadh vs. Bahrain 1:15 p.m.
4. Schedule
Day 2–20 December Ground 1 Time
1st Match Muscut vs. Al Khubar 7:30 a.m.
2nd Match Abu Dhabi vs. Bahrain 10:45 a.m.
3rd Match Muscut vs. Dubai 1:15 p.m.
Day 2–20 December Ground 2 Time
1st Match Kuwait vs. Dubai 7:30 a.m.
2nd Match Riyadh vs. Jeddah 10:45 a.m.
3rd Match Kuwait vs. Al Khubar 1:15 p.m.
5. Schedule
Day 3–21 December Ground 1 Time
1st Semi Final
Match
TBD vs. TBD 10:00 a.m.
Final Match TBD vs. TBD 2 :00 p.m.
Day 3–21 December Ground 2 Time
2nd Semi Final
Match
TBD 10:00 a.m.
3rd Position Match TBD 20 :00 p.m.
For information on applying this template to an existing proposal, refer to the notes on slide 2 of this document.
The Input area of the Beam can be customized to reflect the content of the proposal. The Input area is an AutoShape with a picture fill. To change this, ensure you have the image you wish to use (ideally a .jpg or a .png file) in an accessible folder. The image should have a ratio of 1:1 to ensure it does not appear distorted.
Acceptable images for importing into the Input area of the Beam are the three approved graphics (lines), and black and white photography or illustrations which follow the principles laid out on The Branding Zone. Colour images should never be imported into this area.
Customize the Input area of the Beam as described below.
Click on the View tab from the menu bar and select Master>Slide Master
Right-click on the Input graphic and select Format AutoShape
From the Fill menu, under the Colour and Lines tab, click on the drop-down arrow next to Colour and select the Fill Effects menu
From the Picture tab, click on Select Picture. Navigate to the folder containing the image you wish to insert in the Input area. Highlight the image and tick the Lock picture aspect ratio box. Click on OK
You can now preview the image before continuing. If you are happy with how it looks, click OK to continue. Otherwise, repeat the process until you are happy with your selected image
To exit from Master View, click on View>Normal. The change you made to the Input graphic should now be visible on the title slide.
