Ferrotec nord develops more than 250 types of peltier devices and for the sake of customer convenience, categorize them on the basis of peltier element and place them on table so that it can be easily recognized according to requirement. For further information visit @ http://ferrotec-nord.com/support/peltier-modules
1. Date – 22-Jan-2016
Contacts:
Russia, Moscow, 109383, Peschany Carier 3
Phone: +7 (499) 356-53-89 fax +7 (495) 348-07-00
E-mail: info@ferrotec-nord.com
Peltier Device: A Single Device Used For Cooling and
Heating
The arising need of generating the cool and heat effect is generally
accomplished by a phenomenon called as peltier effect. It is
responsible to product heat and cool effect by conducting electric flux
between two current conducting materials. The module or device
which used the concept of peltier effect is known as peltier device or
module. The peltier modules are known as thermoelectric coolers,
peltier heat pump, and solid state refrigerator.
In the beginning, the two plates constructed through different metals
were used in peltier devices. But now a day to make the peltier module
more precise and efficient in temperature control, a range of
semiconductor material is used. It also works as electricity generator by
heating up one side of device in a manner that temperature is greater
than other side and difference in voltage will build up. This effect is
usually termed as Seebeck effect or thermoelectric effect. It also works
as thermoelectric generator by applying the voltage across the device
which in results creates temperature difference between two sides.
Generally, peltier cooler are solid state active heat pumps responsible
to transfer heat between two sides with consumption of electrical
energy and depending on the direction of the current. The main
application of such devices is cooling. However, it can be used either for
heating or cooling or for both.
2. Date – 22-Jan-2016
Contacts:
Russia, Moscow, 109383, Peschany Carier 3
Phone: +7 (499) 356-53-89 fax +7 (495) 348-07-00
E-mail: info@ferrotec-nord.com
Peltier modules have many numbers of benefits as compared to
traditional technologies which are used to produce heating or cooling
effect through electricity. Some of them are below:
No or less maintainace is required: They have solid designs and does
not require the movement of parts which cause less mechanical
damage and hence less maintainace is needed.
Safe and reliable: They are designed in such a way that no chance of
gases, fluids or dangerous materials and hence more safe and
reliable.
Act as heater and cooler: They have the ability to work like heater
and cooler both for various applications.
Temperature maintainace: It allow competent spot cooling and
quick heating cooling cycle to provide precise temperature control
Temperature Calibration: They are perfectly designed for precise
temperature calibration.
Flexibility and scalability: They have flexible and scalable form
factors
By looking the above advantages, thermoelectric module is used in
many industries.
Application of the peltier device:
Peltier modules are used in numerous amazing applications which are
as follows:
1. Electricity generation in automotive and aerospace industry
2. Cooling in biomedicine, telecom and photonics
3. Date – 22-Jan-2016
Contacts:
Russia, Moscow, 109383, Peschany Carier 3
Phone: +7 (499) 356-53-89 fax +7 (495) 348-07-00
E-mail: info@ferrotec-nord.com
3. Consumer devices
4. Cabin refrigerators and car
All the points made thermoelectric popular in many daily routine
things. For more information visit @ http://ferrotec-nord.com