Arjun C resume - Embedded engineer with 9+ projects
1. Arjun C
+91 9497258123
arjunmanoharan777@gmail.com
ACADEMICS
COURSE INSTITUTION AGGREGATE YEAR
B.Tech ( Electronics and Communication Sarabhai Institute of Science &Technology 73.22% 2010-2014
Engineering) (CUSAT)
Class XII AKGM GHSS PINARAYI (BOARD OF STATE) 87.5% 2010
Class X EKNS GHSS VENGSD (BOARD OF STATE) 89% 2008
SKILLS
Technical Skills: C, C++, Multiple Assembly Codes (x86, 8051, PIC), Embedded C
Operating Systems known: Windows XP/7/8/10, Linux Ubuntu
Microprocessors/Microcontrollers used: PIC16,PIC18,LPC2148,atmega 128
Protocols:I2C,SPI,UART
IDEs Used : MPLAB X IDE,CCS,KEIL Microvision4 IDE,MikroC Pro for PIC,AVR STUDIO 4, Proteus, Dip trace, Express PCB
Emulators/Simulators:PICKIT3,PICKIT2
Areas of Interest: Embedded Systems, Robotics
ORGANISATIONAL EXPERIENCES
Trainee Embedded system programmer at Quest Innovative Solutions,Kannur(DEC 2014 – MAY 2015)
Junior Embedded R&D Engineer at Woduru InfoTech, Calicut(JULY 2015 - PRESENT)
PROJECTS HANDELED
Project# 1:
Title : Ocular Cruise Control System
A system which is used to control accidents due to drink and drive. A Hall Effect based sensor is used for detection abnormal eye
blink variation. GPS and GSM modules are used to detect and send location respectively if any accident is occur.
MICROCONTROLLER : PIC16F877A
Responsibility : Firmware development and Hardware implementation.
Team size : 1
Tools : Mplab X IDE v3.35 with (XC8 compiler)
Project# 2:
Title : Real-time Obstacle Avoidance Robot
A robotic vehicle to avoid static and dynamic objects and finding shortest path between two points without using sensors .Cameras are used
to detect objects and mat lab is used for image processing
MICROCONTROLLER : PIC16F877A
Responsibility : Software Design and implementation (PIC16F877A) and Hardware design
Team size : 4
Tools : Mplab X IDE v3.35 with (XC8 compiler)
Project# 3:
Title : Acute Alarm
An intelligent alarm which uses to decrease the amount of accident due to train in unmanned level cross.Main cause of train accidents are the
unawareness of train arriving . Here a vibration sensor is used to detect train from its vibration.
MICROCONTROLLER : PIC16F877A
Responsibility : Firmware development and Hardware development
Team size : 1
Tools : Mplab X IDE v3.35 with (XC8 compiler)
2. Project# 4:
Title : Automatic Temperature Controlling System
This system controls the temperature inside an area according to user guidance. A temperature sensor gives the corresponding temperature
inside an area and the device controls temperature while automating fan and heater.
MICROCONTROLLER : PIC16F877A
Responsibility : Firmware development and Hardware development
Team size : 1
Tools : Mplab X IDE v3.35 with (XC8 compiler)
Project# 5:
Title : Security System
An advanced alarming device for bank. This system works with the assistance of magnetic relay module attached in doors and ventilators of
the bank. A trespasses through doors and ventilators identified with the help of magnetic relay, and an alert message sent to emergency
numbers stored in the device with a siren alarm.
MICROCONTROLLER : PIC16F877A
Responsibility : Firmware development and Hardware development
Team size : 1
Tools : Mplab X IDE v3.35 with (XC8 compiler)
Project# 6:
Title : Automatic Flour mill
A floor mill which works fully automatically with a weight display and rate printer. Load cell sensor gives the weight of floor and IR sensors are
used for identifying presence of floor.
MICROPROCESSOR: atmega 128
Responsibility : Firmware development
Team size : 2
Tools : AVR STUDIO 4
Project# 7:
Title : Device Control using 2D gestures
A system which control devices using 2D gestures with the help of zigbee. Accelerometer used to identify the motion and zigbee does the
wireless communication.
MICROPROCESSOR: LPC2148
Responsibility : Firmware development
Team size : 2
Tools : Keil Microvison4 IDE
Project# 8:
Title : Student Management System
A device for mark and store student attendance with the aid of RFID card. Student details are stored in web servers and notification messages
send with the help of GSM module.
Built drivers for numerous peripherals present in the device(LPC2148) and communication interfaces .Include :
o http communication with server using GSM module
o RFID communication
3. MICROPROCESSOR: LPC2148
Responsibility : Firmware development
Team size : 1
Tools : Keil Microvison4 IDE
Project# 9:
Title : Home Automation Using IoT
A Smart wireless Home automation Device which automatized attaching node devices with the help of MiWi module.A peer to peer
communication between nodes are create with the help of MiWi module.An android application controls all the devises.ESP01 module
provides the server to client communication
MICROCONTROLLER : PIC18F4550
RF Wireless module :MRF24J40MA
ESP module :ESP8266
Built drivers for numerous peripherals present in the device and communication interfaces .Include
o Build SPI driver for MRF24J40MA
o ESP01 communication(UART driver)
o Load cell uart communication driver
o Software uart driver
Responsibility : Firmware development and Hardware development
Team size : 2
Tools : Mplab X IDE v3.35 with (XC8 compiler)
PROFESSIONAL TRAINING ATTENDED
Advanced diploma in Embedded System from Quest Innovative Solution, Kannur
Trained in ITI Bangalore in Telephonic Communication
SOUPARNIKA
Vengad(PO)
Kannur
670612
Kerala