Denovolab ( www.denovolab.com ) is a SIP switching solution that is extremely high performance. Suitable for call center, wholesales termination, carrier services.

1. DENOVO
LAB
LIMITED
ONLINE
DEMO
GUIDE

2. Purpose
The purpose of this document is to provide a basic understanding on
how to configure the online demo to start routing traffic. This document
does not serve as a complete user manual but rather as simple steps
and guidelines for configuring the online demo switch to perform live
switching, routing, and billing.
The User Manual of the system will be provided one MNDA and MSA
has been signed.

3. Purpose
DEMO SWITCH
YOUR SWITCH
IP: 2.3.4.5

4. Demo
Steps
1.
Create
Ingress
Carrier
2.
Create
Ingress
Trunk
3.
Create
Egress
Carrier
4.
Create
Egress
Trunk
5.
Create
Sta7c
Route
6.
Create
Rou7ng
Plan
7.
Send
Traffic
8.
Check
CDR

5. Technical
Interoperability
Web
UI
hGp://demo.denovolab.com
User
Name
admin
Password
gDJQfSyw209!!
IP
173.205.112.248

6. Preparation
1. Register a new account
2. Create a new trunk in checkmyroutes.com

7. Login
Page

8. Create
New
Carrier
Click Create New

9. Create
New
Ingress
Carrier
Click Submit When Done.

10. Add
Ingress
Trunk
Click “Add Ingress Trunk”

11. Add
Ingress
Trunk
Enter “CheckMyRoute.com” IP

12. Create
a
New
Ingress
(Sell)
Rate

13. Add
Egress
Carrier

14. Add
Egress
Trunk
Click “Add EgressTrunk”

15. Add
Ingress
Trunk
Enter “Your OWN Switch” IP

16. Create
a
New
Egress
(Buy)
Rate

17. Create
a
Static
Route

18. Create
a
New
Routing
Plan

19. Create
a
New
Static
Route
• Name your Static Route as “MY ROUTE”
• Place your switch’s IP in this static route.
• Use empty prefix means all DNIS will go to this trunk

20. Create
a
New
Routing
Plan
• <prefix> is empty means all traffic will go to this Routing Rule.
• For this rule, specific the Route Type as Static and select
“MYROUTE” under “Static Routing”

21. Create
a
Routing
Plan

22. Send
Test
Call

23. Check
Active
Calls

24. Check
Call
Result

25. Check
Call
Detail
Records