This document provides a summary of Aman Kumar's experience and qualifications. It outlines his 4+ years of experience in HSE design for offshore, LNG, onshore and refinery projects. It also lists his educational credentials of an M.Tech in HSE Engineering and B.Tech in Chemical Engineering. Finally, it details his current role as a Senior Safety Design Engineer at Technip where he has worked on several projects performing tasks like fire protection design, hazard studies, and safety reviews.

1. Page 1 of 3
AMAN KUMAR
Address: Flat No 301, Plot No. 306, sangam gali, New Ashok Nagar, New Delhi - 110096
Contact: +91 9871722697; E-mail: amanchemrbs@gmail.com ; D.O.B: 4th October 1987
SUMMARY
4+ years of experience in HSE Design mainly in the field of Offshore, LNG, Onshore & Refinery.
Projects involved are LNG - Detailed Feasibility Study & Detailed Proposal, Offshore – Detailed Engineering & Proposals,
Onshore – Oil & Gas Processing Terminal (LSTK, FEED & ITB), Refinery – FEED & Detailed Engineering.
TECHNICAL SKILLS
Design of Fire Protection & Fire Prevention Systems.
Surge Analysis for fire water network using Pipenet “Transient Module.”
Fire Suppression System.
Prepare Fire water hydraulic calculations using PIPEnet.
Fire Protection system for Buildings.
Developing detailed PID’s for fire water network including pumps for complex oil & gas terminals & refineries.
Specifications for Fire Fighting Systems.
Thermal Radiation & Dispersion modelling.
F&G Mapping Study.
Inherent Process Safety.
HAZOP & HAZID workshop.
Engineering Software’s - PHAST, Pipenet (Network, Spray/sprinkler & Transient Modules).
EDUCATIONAL CREDENTIALS
M. Tech (Health Safety Environment Engineering), 2009-11
College of Engineering, University of Petroleum & Energy Studies, Dehradun.
B. Tech (Chemical Engineering), 2005-09
Raja Balwant Sign College, Uttar Pradesh Technical University, Agra.
XIIth
, 2005
Asha Modern School, Saharanpur, C.B.S.E. Board, Saharanpur.
Xth
, 2003
Infant Jesus School, I.C.S.E. Board, Saharanpur.
PROFESSIONAL EXPERIENCE
Current Organisation: TECHNIP, Noida (April 2012 - Present)
DESIGNATION: Sr. Safety Design Engineer (HSE Design LEAD)
PROJECTS:-
Project 1: Onshore Terminal for VA & S1 Development Project, ONGC, KAKINADA (Gas Processing Terminal).
Type: LSTK – Ongoing
Roles and responsibilities:
o Fire Protection & Suppression Design Basis.
o Fire and Gas Detection concept sketches/layout/ philosophies.
o Passive Fire Protection Layout/ Specifications/ Philosophies.
o Fire Water Demand Calculation.
o Hydraulic calculation of fire water network / spray system/ curtain system including design of pumping system using
Pipenet.
o Hydraulics for Sprinkler System design for Buildings including detailed sprinkler system layouts.
o Surge analysis for fire water pumping system using Pipenet “Transient Module.”
o Conceptual layout for fire water network.
o PID’s for complete Fire Water Network including automatic system for Fire water tanks & pumps.
o PID’s for automatic deluge system for fire water spray & curtain system.

2. Page 2 of 3
o Fire fighting equipment, personnel protection & safety signs layout.
o Hazardous Equipment Schedule/ Hazardous Area Classification Drawing.
o Preparation of Fire & Gas Cause & Effect Chart.
o QRA study for the process facility.
o F&G Mapping study for optimizing/verification of F&G Layout.
o HAZID & HAZOP Procedures.
o HAZID/ HAZOP workshop & preparation of HAZID Closeout Report.
o Definition of applicable standards/regulations for the project & receiving statuary approval like OISD & PESO for
safety design.
Project 2: i. Reliance Benzene Recovery Unit Project, Jamnagar, Gujarat.
ii. Reliance Off-Gas Cracker Project, Jamnagar, Gujarat.
Type: Detailed Engineering (EPCM Service) – Ongoing
Roles and responsibilities:
o Fire and Gas Detection concept sketches/layout/ philosophies.
o Fire Protection & Fire Zone Drawings/ Specifications/ Philosophies.
o Passive Fire Protection Layout/ Specifications/ Philosophies.
o Fire Water Demand Calculation.
o Prepare Fire water hydraulic calculations using Pipenet.
o Conceptual Fire Protection Equipment Layout.
o Fire fighting equipment, personnel protection & safety signs layout.
o Deluge detailed arrangement drawings/PIDs.
o Hazardous Equipment Schedule/ Hazardous Area Classification Drawing.
o Preparation of Fire & Gas Cause & Effect Chart.
Project 3: PETRONET LNG Terminal, SIKKA, Dahej, Gujarat
Type: Detailed Feasibility Study
Roles and responsibilities:
o Detailed Consequence Analysis for Jetty & Terminal.
o Initial Environmental Examination (IEE) Report Review.
o Safety Concept/ Philosophy.
o Equipment layout review based on safety aspects.
o Fire water demand calculation.
o Hydraulic calculation & design of fire water network using Pipenet.
o Design of water spray fire protection systems.
o Fire protection & personnel protection drawing.
o Provision of passive fire protection.
o Preparation of equipment list for HSE equipment.
Project 4: CRAIN India Limited.
i. Mangla Upgradation Project (Oil Processing Terminal).
ii. Raageshwari Field Development Project (Gas Processing Terminal)
Type: FEED & ITT Package Preparation.
Roles and responsibilities:
o Fire and Gas Detection Design Basis/ layout.
o Fire Protection & Prevention (Fire Suppression System) Design Basis.
o Passive Fire Protection Design Basis/ Drawings /layout.
o EPC Contractor HSE Design Scope of Work.
o Fire Water Demand Calculation.
o Perform adequacy & verification of existing Fire water network hydraulic calculations using Pipenet.
o Conceptual Fire Protection Equipment Layout.
o Hazardous Equipment Schedule/ Hazardous Area Classification Drawing.
o Preparation of Equipment List for HSE Equipment.

3. Page 3 of 3
Project 5: Fujairah Refinery Project at Fujairah, UAE.
Type: Detailed FEED.
Roles and Responsibilities:
o Fire protection system design including fire water demand calculation.
o Fire protection & personnel protection drawing.
o Fire & Gas detector layout.
o Fire proofing schedule/ Drawing.
o Hazardous equipment schedule/ Hazardous area classification drawing.
o Fire Fighting Equipment list.
Project 6: Design & Construction of Infrastructure for MICA Missiles Maintenance and Storage.
Type: PMC services for FEED & Detail Engineering
Roles and Responsibilities:
o Review of HSE Design deliverables.
o Fire Protection & Detection Design Basis.
o Fire Fighting System Design/ Drawing & PID’s.
o Fire Detector Drawings.
o Sprinkler system design for High Hazardous Buildings.
Detailed Proposals Undertaken:
o LNG:
- PETRONET - LNG Regasification at Dahej, Gujarat.
o Offshore:
- ONGC- BCPA-3, Bassein Development Platform, Mumbai.
- ONGC - Heera Re-Development Platform (HRD, Phase-II), Mumbai.
- ONGC - HRP & B-127 Cluster offshore well platform, Mumbai.
o Onshore:
- ONGC – Mehsana Gas Gathering Station Proposal at Mehsana, Gujarat.
Previous Organisation: L&T Valdel Pvt. Ltd., Bangalore (July 2011 – April 2012)
DESIGNATION: Safety Design Engineer
PROJECTS:-
Project 1: PTTEPI Offshore Project, Myanmar.
Type: - Detail Engineering
Roles and Responsibilities:-
o Thermal Radiation and Dispersion Modelling for flare stack using DNV-PHAST Software version 6.7.
o Develop Safety Concept/Philosophy.
o Hazardous Equipment Schedule/ Hazardous Area Classification.
o Escape routes and fire fighting equipment’s layouts.
o Design of Fire Water Spray system using PIPENET software version 1.3.
o HAZOP & HAZID workshop & recommendation closeout.
o Safety Studies review:
- Escape, Evacuation and Rescue Analysis Report (EERA).
- Fire and Explosion Risk Analysis Report (FERA).
- Quantitative Risk Analysis (QRA) including Bow-Tie Diagram.
- Reliability Availability and Maintainability (RAM).
- Dropped Object Study.
Project 2: ADMA-OPCO Offshore Projects.
i. UMM-LULU Full Field Development Project, Phase –II.
ii. Satah-Al-Razboot Project.
Type: - FEED Verification & Proposal
Roles and Responsibilities:-
o Complete FEED verification including preparation and submission of Endorsement Reports.