Chubb AFx System Design Guide June 2009

System Design GuideSystem Design Guide

2System Design Guide July 2008-MKTG6119
Chubb Security Systems
5201 Explorer Drive
Mississauga, Ontario
Canada L4W 4H1
Copyrights and Trademarks
™ Chubb AFx™ is a trademark of CSG Security Inc. / Securité CSG Inc.
™ G-Prox is a trademark of CSG Security Inc. / Securité CSG Inc.
® Microsoft is a registered trademark of Microsoft Corporation.
® Pentium is a registered trademark of Intel Corporation.
Chubb AFx™ System Design Guide
Revision History
Revision Description Date Author
V 4.0 Original Verex Monitor AFx™ Quotation Guide 25-04-02 CB
V4.0 Chubb Monitor AFx™ Sales Guide 27-08-03 AM
V4.22 Chubb Monitor AFx™ System Design Guide 20-06-04 AM
V4.5 Chubb AFx™ System Design Guide 22-03-06 AM
V4.31 Chubb Monitor AFx™ System Design Guide 20-09-04 AM

Contents
Introducing Chubb AFx™………………………………….……...5
Chubb AFx™ Packages and Application Modules….……....16
Communications Guide……………………………………..…...77
The modular design of the Chubb AFx™ system is flexible enough to handle the physi-
cal configuration of any security application. This section discusses different types of
installation configurations.
Lists the hardware components and application modules that make up the Chubb
AFx™ platform.
Chubb AFx™ offers multiple communications options for transmitting event information
to a central monitoring facility as well as for the purpose of comprehensive security
management via Director software.
Chubb AFx™ Features…………………….………....…………..50
Years of design work on the Chubb AFx™ have resulted in a sophisticated security
management system that accommodates an application’s needs for end user conven-
ience without sacrificing the essential principles of good security design. This section
discusses system-wide, intrusion, access, and Director software features.
Definitions…...…………………………………………………..…..6
Understanding the security concepts that drive the Chubb AFx™ system is critical in
the proper planning of a security application.
Installation Configurations………………………...……….…...11
Director Security Management Software.……….……..…......32
The scalable and expandable Chubb AFx™ platform uses a combination of hardware
components and software packages to expand the Base system to suit an applica-
tion’s requirements.

5
The Chubb AFx™ system fully integrates all aspects of security technology to
provide comprehensive, cost-effective premises protection solutions.
The Chubb AFx™ platform is scalable and expandable : its modular hardware design and user-
friendly Windows®-based management software packages allow you to offer prospects custom-
tailored systems that will address their current security needs with easy expansion capability at any
time in the future.
Introducing Chubb AFx™

6
On the following pages are descriptions that will assist you in
understanding the fundamental design concepts that drive the
Chubb AFX™ product line.
Definitions

Also known as a partition : a defined perimeter with
distinct intrusion and access characteristics (such as
entry / exit delays and automated arming) independent
of other areas. In an industrial building, the offices
could be designated as one area, and the plant as the
second area. Chubb AFx™ is area-centric, meaning
input points, outputs and doors are assigned to a spe-
cific area. There are 16 areas available per Chubb
AFx™ panel. Through expansion the Chubb AFx™
system can support a total of 1600 areas per individ-
ual account (site).
Input points are physical connections used to
monitor the security devices connected to the
Chubb AFX™ system. Typical intrusion point de-
vices are door contacts, motion and glass break
sensors, smoke and environmental condition detec-
tors, and panic devices . Each Chubb AFx™ panel
has 12 input points and can support up to 256 such
points via expansion modules. Each Chubb AFx™
input point can be supervised with a programmable
resistance value and diagnosed remotely with the
use of Director Security Management software.
INPUT POINTS
Outputs are used to generate an action, based on a com-
mand from the Chubb AFx™ panel. Typically, outputs trig-
ger sirens, turn lights on or off, open a garage door, etc.
There are 2 relay outputs on the main panel which may be
expanded to 128 relay or transistor outputs (up to twelve of
which may be reserved for numeric paging). Outputs can
be triggered by a single event, manually from the Chubb
AFx™ LCD keypad or according to a logical combination of
up to 15 conditions using Boolean equations (AND ,OR,
NAND,NOR). The wide variety of options for AFx™ outputs
allow creative solutions to application challenges without
the addition of other equipment such as timers and relays.
OUTPUTS
AREA
Definitions

An account corresponds to a Chubb AFx™
system in a specific location (site) : a single ac-
count can consist of one or multiple Chubb
AFx™ panels connected to share information
such as users, schedules, authority levels, etc.
A fully expanded Director application supports
up to 1000 AFx™ accounts.
ACCOUNT
USERS
Authority levels simplify the process of adding users to
the Chubb AFx™ system. These levels determine which
areas a system user may access, which commands they
will be able to use, and when they will be able to do so. By
creating custom authority levels for each group of users -
i.e. Office Workers, Warehouse Workers, etc. - any indi-
vidual added is simply assigned an existent authority level
to be instantly ‘activated’ in the Chubb AFx™ system.
AUTHORITY LEVELS
Users are the people who will interact with the Chubb
AFx™ system on an everyday local basis. They will have
access privileges and control over intrusion commands
consistent with their position on the premises : for in-
stance, a company president will likely have full privileges
on a 24-hour basis, whereas a cleaner may only be al-
lowed entry during specific time periods and have little or
no control over the armed state of the system. A user’s
abilities in a Chubb AFx™-controlled application are de-
termined by their assigned authority level.
Schedules consist of times and days of the week . They
are used in conjunction with the areas of a Chubb AFx™
application to create authority levels that will determine a
user’s ability to access and control the system. Schedules
can also be applied to areas and doors to automate func-
tions like automatic arming and locking/unlocking of doors
(in areas where public access is occasionally permitted).
SCHEDULES
Definitions

Supervision is an important concept in security : it refers to the
ability of a system to monitor the presence and status of a device
or devices that are associated with the system, either by physical
(hardwired) connection or Radio Frequency (wireless) transmis-
sion. If a device is disconnected or malfunctioning, supervision
will provide instantaneous notice of the condition, prompting an
immediate response to investigate and correct if necessary.
Control panels also monitor local conditions such as the AC
power supply, telephone line and backup battery .
Anti-passback is a mode of operation in access
control that requires a user to both enter and exit a
designated area before that user can enter the same
or another controlled area. This prevents users from
loaning their cards to other users and provides a
comprehensive audit trail of a user’s passage
through a system. Anti-passback can be pro-
grammed to reset after a specified time period.
ANTI-PASSBACK
TROUBLE
SUPERVISION
The SNAPP communications bus is the four wire connection
between the Chubb AFx™ panel and the application mod-
ules that make up a system. Serial Network Alarm Panel
Protocol is the ‘language’ that all Chubb AFx™ modules use
...this encrypted, fully supervised high speed protocol en-
sures rapid execution of all access/intrusion commands. The
wide variety of Chubb AFx™ application modules makes the
system flexible enough for centralized or distributed installa-
tions, or premises combining both concepts.
SNAPP
The Chubb AFx™ platform employs a modular de-
sign : the basic panel can function as a standalone
intrusion system but easily expands by adding
SNAPP application modules. Each module will add
a specific functionality such as additional points of
protection, access control or elevator control.
MODULES
Definitions

The Feature Set of an AFx™ system determines the features and capacities available to system
users. The Feature Set of an AFx™ system is determined by a programmed value in the control
panel (represented by the first row in the table above). For example, an AFx™ system pro-
grammed with a Feature Set value of 1 would support a single panel system of up to 16 areas,
20 users, 30 authority levels and 50 schedules. The highest Feature Set a basic AFx™ control
panel can support is 3.
The Feature Expansion board is added to the AFx™ basic control to support Feature Sets 4 - 7 :
the FEB is also required to support access control (*Feature Sets below 4 are also supported
with the addition of the FEB—for example, a site with access control that requires no more than
20 users could be programmed to operate at Feature Set 1 to allow system users to log in with
only a four-digit Personal Identification Number).
Feature Sets 5 and above are typically larger sites involving multiple Chubb AFx™ panels con-
nected together to form one large system. Director Security Management Software is required
to configure and manage such systems on an ongoing basis. (Note : Director software can be
used for security management of any AFx™ sites, regardless of Feature Set value—see pages
32-44 for additional details).
Feature Sets
Feature Set 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Users 20 100 300 1000 1000 2000 4000 10,000 10.000 20,000 20,000 20,000 64,000 64,000
Doors per panel 16* 16* 16* 16* 32 * 32* 32* 32* 32 * 32* 32* 32* 32* 32*
Schedules 50 50 50 100 100 100 100 250 250 250 250 250 250 250
Authority Levels 30 30 30 100 100 100 100 500 500 500 1000 1000 1000 1000
Multiple Panels No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Elevator Control No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Points per panel 256 256 256 256 256 256 256 256 256 256 256 256 256 256
Outputs per panel 128 128 128 128 128 128 128 128 128 128 128 128 128 128
Areas per panel 16 16 16 16 16 16 16 16 16 16 16 16 16 16
Event Buffer 1024 1024 1024 2048 2048 2048 2048 8192 8192 8192 16,364 16,364 65,536 32,768
Holidays 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Suite Security No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
The Basic AFx™ Control Panel
supports up to Feature Set 3
The Feature Expansion Board
adds access control & support
up to Feature Set 7
Additional RAM for the Feature Expansion Board is
required for AFx™ Feature Sets 8 through 14
Director Software Licensing
is required for AFx™ Feature Sets 5 through 14
Director Software Licensing
is optional for AFx™ Feature Sets 1 through 4
#120-8910 #120-8920 #120-8964

11
The Chubb AFX™ is a highly flexible system that will suit virtually any building or site.
The two basic installation configuration styles are centralized and distributed. The following
examples are extreme illustrations of these styles. Most sites will follow one general style, but
incorporate elements of the other to suit an application’s unique characteristics.
Installation Configurations

The Exit 1 door contact is wired to a zone input on the Chubb AFx™ LCD keypad.
The Exit 2 door contact and showroom motion sensor are wired to the 8 zone input
point expander : only the four wire fully supervised SNAPP connection is required to
connect to the Chubb AFx™ control panel. The contact on Exit 3 is wired directly to
one of the eight inputs on the control because of its proximity to the main control
panel.
Intrusion-only systems are typically distributed, which means that the LCD keypads,
point expanders, and wireless module devices will be mounted fairly close to the de-
vices they control (door/window sensors, motion detectors, etc.)
Office 1 Office 2 Office 3
Storage Room
Utility
Room
Showroom
EXIT 1
EXIT 2 Legend
SNAPP Communications Bus
Sensor wiring
EXIT 3
Magnetic
Contact
Magnetic
Contact
Point
Expander
Magnetic
Contact
Motion
Detector
LCD
Keypad
Chubb
AFx™
Panel
Distributed Intrusion-Only Installation

Centralized Access Control Installation
The control panel and access modules are installed in a centrally-located utility room. RS 485
bus wire runs tend to be shorter, while module device wire runs are longer.
Advantages: Trouble shooting is easier as all devices are in one single location
Power management is easier as all devices are in one single location.
Disadvantages: More expensive to wire (individual wires have to be run from the utility
room to each sensor, reader, door strike or magnetic lock).
Storage Room
Utility
Room
Showroom
Legend
Reader/contact/strike wiring
EXIT 1
EXIT 2
EXIT 3
Card readers, door strikes and door contacts on each exit are wired to the four-door access mod-
ule, which is connected to the Chubb AFx™ via the four-wire SNAPP bus. The door contacts do
not take up any of the available 256 input points on the Chubb AFx™ system but are automati-
cally associated with their respective doors via connection to the door module : these are impor-
tant for detection of Door Forced and Door Held Open conditions. The LCD keypad module is re-
quired for local editing of users and system control. A second card reader could also be added to
each door for controlled exit purposes.
Chubb
AFx™
Panel
Proximity
Reader
Multiple
Door
Controller
Door
Strike
Door
Strike
Proximity
Reader
Door
Strike
Proximity
Reader
LCD
Keypad

Distributed Access Control Installation
The control panel will typically be in a centrally located room, while the modules will be in-
stalled close to doors, windows, and other locations that are being controlled or protected.
RS 485 bus wire runs tend to be longer, while module device wire runs are shorter.
Advantages: Less expensive to wire because the RS 485 cable is run to the
modules and connections to the sensors, readers or door strikes are short.
Disadvantages: More difficult to trouble shoot as the devices are further apart.
Power management is more expensive as devices are scattered throughout the facility.
Storage RoomUtility
Room
Showroom
Legend
EXIT 1
EXIT 2
EXIT 3
Card readers, door strikes and door contacts on each exit are wired to two-door access modules,
which are connected to the Chubb AFx™ via the four-wire SNAPP bus. The contacts are not con-
sidered Intrusion points but are associated with their respective doors : these are important for de-
tection of Door Forced and Door Held Open conditions. The LCD keypad module is required for
local editing of users and system control. A 2nd card reader could also be added to each door for
controlled exit purposes (Version2 door controllers only).
Chubb
AFx™
Panel
Door
Strike
Proximity
Reader
Door
Strike
Door
Strike
Proximity
Reader
2-Door
Controller
2-Door
Controller
Proximity
Reader
LCD
Keypad

Hybrid Intrusion/Access Control Installation
Hybrid installations incorporate elements of both centralized and distributed systems, de-
pending on the unique characteristics of an application. Factors such as a premises’ con-
struction, the location and number of protective devices - even cosmetic considerations -
can influence the design of a Chubb AFx™ system. The flexibility of the Chubb AFx™ plat-
form supports virtually any combination of centralized and distributed module installation.
Storage Room
Utility
Room
Showroom
Legend
SNAPP Bus connection
Sensor wiring
EXIT 1
EXIT 2
EXIT 3
Card readers, door strikes and door contacts on each exit are wired to a four - door access module,
which is connected to the Chubb AFx™ via the four-wire SNAPP bus. The point expander and LCD
keypad are also connected to the SNAPP bus and the showroom motion sensor and glass break
detector wire directly to the input point expander.
Chubb
AFx™
Panel
Door
Strike
Proximity
Reader
Door
Strike
Proximity
Reader
Point
Expander
Motion
Detector
LCD
Keypad
Multiple
Door
Controller
Door
Strike
Proximity
Reader

16
Packages and Application Modules
The Chubb AFx™ platform utilizes application modules to build the
system beyond the capacities of the basic control panel. The mod-
ules shown on the following pages add expanded capabilities and
specific features through connection to the Chubb AFx™’s fully super-
vised SNAPP communications bus.

Access Control
Director Security Management Software
Wireless Sensors
Point Expansion
Graphic DisplaySuite Security
Local Control
Chubb AFx™
System Architecture
The AFx™ control panel is the heart of Chubb’s scalable and expandable inte-
grated Intrusion / Access platform.
Each AFx™ panel can function as a standalone intrusion system : should a
site’s requirements change, application modules are added to expand the sys-
tem’s capacities to add security devices, access control, elevator access control
and full system management capability where required.
Even installations that use the AFx™ solely for the purpose of intrusion detection will benefit from
the sophistication of its powerful microprocessor-based structure, which incorporates features gener-
ally associated with high-end commercial systems.
Single PanelSingle Panel MultiMulti--PanelPanel
AreasAreas 1616 4,0004,000
Input PointsInput Points 1212 –– 256256 64,00064,000
Output PointsOutput Points 22––124124 31,00031,000
UsersUsers 2020 –– 64,00064,000 2020 –– 64,00064,000
Doors (access control option)Doors (access control option) 16 to 3216 to 32 8,0008,000
Readers per DoorReaders per Door 22 22
Floors (per account)Floors (per account) 120120 120120
Application Modules per panelApplication Modules per panel 2424 2424
Authority LevelsAuthority Levels 100100 –– 1,0001,000 100100 –– 1,0001,000
SchedulesSchedules 5050 –– 250250 5050 –– 250250
HolidaysHolidays 5050 5050
Event BufferEvent Buffer 10241024 –– 65k65k 10241024 –– 65k65k
Circuit SupervisionCircuit Supervision 4 custom types4 custom types 4 custom types4 custom types
AC SupplyAC Supply 16 VAC,37 VA16 VAC,37 VA
Power for DevicesPower for Devices 12 VDC / 750 mA12 VDC / 750 mA
DimensionsDimensions 10.1”x 14”x 3.2”/ 256.54mm x 355.6mm x 81.28 mm10.1”x 14”x 3.2”/ 256.54mm x 355.6mm x 81.28 mm
Temperature RangeTemperature Range 32°32° -- 120°F / (0°120°F / (0° -- 50° C)50° C)
RS485 Direct / Internet Protocol connectionRS485 Direct / Internet Protocol connection
CommunicationsCommunications Digital (SIA or Contact ID Format)Digital (SIA or Contact ID Format)

This is the brain of the Chubb AFX™ system. The control panel con-
sists of a motherboard that contains the operating firmware and the
unique information about the application—users, schedules, authorities,
etc. as well as all module programming . The panel is housed in a metal
cabinet and also has an onboard power supply.
The motherboard features direct hardwire terminals for 12 fully super-
vised security devices, 2 relay outputs, 12 virtual numeric pager out-
puts, an RS485 port for connection to a PC and a fully supervised com-
munications bus connection for expansion devices.
Chubb AFx™
The AFx™ control is available in a variety of packages for different applications : each includes a
transformer and back-up battery as well as additional products for the specific security and com-
munication requirements of the application. For complete details on the part numbers and contents
of each package, see the AFx™ Quick Reference Guide.
Digital Intrusion Packages support the connection of up to 12 detection de-
vices and include a digital communicator for offsite event transmission utiliz-
ing the public telephone lines. These systems can be expanded to support
access control at any time(requires addition of Feature Expansion Board).
Digital Integrated Packages support the connection of up to 12 detection
devices and include a digital communicator for offsite event transmission util-
izing the public telephone lines. The Feature Expansion Board is included
for access control and support of Feature Sets above 3.
AFx™ Packages
100100--8210……………………………………………..........................Digital Intrusion Package English8210……………………………………………..........................Digital Intrusion Package English
100100--8211……………………………………......................................Digital Intrusion Package French8211……………………………………......................................Digital Intrusion Package French
100100--8212…………………………………..…...Digital Communications Integrated Package English8212…………………………………..…...Digital Communications Integrated Package English
100100--8213……………………………….……....Digital Communications Integrated Package French8213……………………………….……....Digital Communications Integrated Package French
High Security Communication Intrusion Packages support the connec-
tion of up to 12 detection devices and include a high security communica-
tions module for MK7 high security event transmission on the DVACs net-
work : a digital communicator is also included for backup communications.
Package also includes an AFx™ Fire Supervision module and Delta Bell
strobe light / sounder with rechargeable back-up battery. These systems can
be expanded to support access control at any time (requires addition of Fea-
ture Expansion Board).
100100--8324…………………….…….……High Security Communications Intrusion Package English8324…………………….…….……High Security Communications Intrusion Package English
100100--8325…………………………..…...High Security Communications Intrusion Package French8325…………………………..…...High Security Communications Intrusion Package French

Safe Protection Packages support the connection of up to 12 detection
devices and includes a seismic detector specifically designed for safes
and vaults, as well as a heat detector for sensing thermal attacks. These
packages are available in both digital communication only and high-
security communication configurations (the high security package also in-
cludes a backup digital communicator).
Financial Packages support the connection of up to 12 detection devices and
include a high security communications module for MK7 high security event
transmission on the DVACs network : a digital communicator is also included for
backup communications. These systems can also be expanded to support addi-
tional detection devices at any time.
High Security Communication Integrated Packages support the
connection of up to 12 detection devices and include a high security
communications module for MK7 high security event transmission on
the DVACs network : a digital communicator is also included for backup
communications.The Feature Expansion Board is included for access
control and support of Feature Sets above 3. Additional package com-
ponents : AFx™ Fire Supervision module and Delta Bell strobe light /
sounder with rechargeable back-up battery.
Monitor AFx Legacy System Packages provide expansion for sites using
Monitor AFx panels or Director software Version 3 / early Version 4 (earlier
than Version 4.4). AFx systems feature flash upgradeable firmware that can be
reprogrammed for compatibility with installed systems.
AFx™ Packages
100100--8326……………………..……….High Security Communications Integrated Package English8326……………………..……….High Security Communications Integrated Package English
100100--8327……………………………...High Security Communications Integrated Package French8327……………………………...High Security Communications Integrated Package French
100100--8347…………………..…..….......................Safe Protection Digital Communications Package8347…………………..…..….......................Safe Protection Digital Communications Package
100100--8348…………………………..…..…Safe Protection High Security Communications Package8348…………………………..…..…Safe Protection High Security Communications Package
100100--8340……………………..…..…...........................................................Financial Package English8340……………………..…..…...........................................................Financial Package English
100100--8341…………………………………..…………………………….….......Financial Package French8341…………………………………..…………………………….….......Financial Package French
100100--8344………...……..…..…..................................Monitor AFx Legacy System Package English8344………...……..…..…..................................Monitor AFx Legacy System Package English
100100--8345……………………..……………..................Monitor AFx Legacy System Package French8345……………………..……………..................Monitor AFx Legacy System Package French

Cellular / Digital Fire Monitoring Packages For ULC S561 compliant
applications where DVACS is unavailable or cost prohibitive : addi-
tional hours and consumables required (flex / conduit). Cellular com-
municator must be programmed for daily testing. Dialer communication
ensures that fire signals can be transmitted in 60 seconds or less. In-
cludes AFx control in metal cabinet, worldwide modem, LCD PLUS
keypad, GS3060I cellular communicator, 1 amp power supply for cellu-
lar communicator (with battery and transformer), fire supervision mod-
ule, 7 aH battery, transformer, phone cord and jack.
DVACS / Digital Fire Monitoring Packages For ULC S561 compliant
applications, additional hours and consumables required (flex / con-
duit). HSC is for line security / supervision. Dialer communication will
ensure that fire signals can be transmitted in 60 seconds or less. In-
cludes AFx control in metal cabinet, worldwide modem, LCD PLUS
keypad, HSC module, fire supervision module, 7 aH battery, trans-
former, phone cord and jack.
100100--8353……………………...…….Chubb AFx DVACS / Digital Fire Monitoring Package English8353……………………...…….Chubb AFx DVACS / Digital Fire Monitoring Package English
100100--8354……………………..………Chubb AFx DVACS / Digital Fire Monitoring Package French8354……………………..………Chubb AFx DVACS / Digital Fire Monitoring Package French
100100--8357……………………...…….Chubb AFx Cellular / Digital Fire Monitoring Package English8357……………………...…….Chubb AFx Cellular / Digital Fire Monitoring Package English
100100--8358……………………..……...Chubb AFx Cellular / Digital Fire Monitoring Package French8358……………………..……...Chubb AFx Cellular / Digital Fire Monitoring Package French
AFx™ Packages
The Slimline Chubb AFx is specifically designed for applications
where there is limited space for a control panel enclosure : ideal for
Automatic Teller Machines. For high security communications add the
100-2561 application module (page 24). Includes AFx control in slim-
line metal cabinet, worldwide modem, fixed 135° heat detector, ATM /
Night Deposit seismic, Magnetic door contact, 2 aH battery & trans-
former, phone cord and jack.
100100--8355…………...……..…..…............................................Chubb AFx Slimline Package English8355…………...……..…..…............................................Chubb AFx Slimline Package English
100100--8356……………………..……………................................Chubb AFx Slimline Package French8356……………………..……………................................Chubb AFx Slimline Package French

Chubb AFx™ LCD keypads feature backlit keys, a 2 x 16 character Liquid Crystal Display screen
and control keys to allow system users to view, control and modify the system settings. It has
three menu selection ‘hot keys’ : in tandem with the keypad’s display prompts, these keys simplify
the process of interacting with the keypad by ‘stepping through’ menu command choices . The
LCD only displays the command sets available to the user who has logged on, preventing confu-
sion for casual users and providing higher security.
Four user languages - English, French, Dutch and Spanish - are supported by the keypads. They
are available in grey and white. There are also three programmable keys, typically used for panic,
fire, and medical emergencies In addition, the function (f) key allows users to activate up to 10
specific output functions.
LCD Keypads
The Large LCD keypad features a large 2 x 16 character LCD display. It
also supports a single hardwired zone input and one transistor output. The
large LCD keypad is designed to mount on a triple-gang electrical box.
The LCD PLUS keypad features four hardwired zone inputs (with custom-
izable resistance values) and one transistor output.
The LCD PLUS c/w GProx II proximity reader circuit supports user intrusion
& access commands via GProx II tokens. It also features four hardwired zone
inputs (with customizable resistance values) and one transistor output.
The LCD PLUS c/w Weigand Input supports only two input points
(with customizable resistance values) but includes support for Wei-
gand output devices to add intrusion / access command functionality
using the sites’ existent access token technology. Ideal for use with
GProx II weatherized reader and arming stations.
100100--2126………..........................................................................................LCD PLUS Keypad White2126………..........................................................................................LCD PLUS Keypad White
100100--2127.......................................................................................................LCD PLUS Keypad G2127.......................................................................................................LCD PLUS Keypad Greyrey
100100--2128…………………….......................................LCD PLUS Keypad c/w GProx II reader White2128…………………….......................................LCD PLUS Keypad c/w GProx II reader White
100100--2129……………………………………………........LCD PLUS Keypad c/w GProx II reader Grey2129……………………………………………........LCD PLUS Keypad c/w GProx II reader Grey
100100--2130………………………………….……............LCD PLUS Keypad with Weigand Input White2130………………………………….……............LCD PLUS Keypad with Weigand Input White
100100--2131………..........................................................LCD PLUS Keypad with Weigand Input Grey2131………..........................................................LCD PLUS Keypad with Weigand Input Grey
100100--2124……..............................................................................................Large LCD Keypad White2124……..............................................................................................Large LCD Keypad White
100100--2125……................................................................................................Large LCD Keypad Grey2125……................................................................................................Large LCD Keypad Grey

Worldwide Modem
The Worldwide modem plug-in module adds digital communications
(supporting SIA or Contact ID format) to the Chubb AFx™ system. It
can also be used with Director Security Management software up to
Feature Set 7 at a speed of 2400bps : on Chubb AFx sites where the
Bell 103 modem has been installed, the Worldwide Modem can re-
place it quickly and easily. The Worldwide Modem is not a SNAPP
module (does not count toward the total of 24 supported by each con-
trol panel).
Enhanced Input Expanders
Application Modules
100100--2541………………………………………………..………..…………..….Feature Expansion Board2541………………………………………………..………..…………..….Feature Expansion Board
Feature Expansion Board
Plug-in module connects to the Chubb AFx™ system to add access
control and support for Feature Sets 4 through 14 (feature sets above
7 also require additional RAM). The Feature Expansion Board can be
added at any time to Chubb AFx™ intrusion systems to add access
control and support for Features Sets 4 through 14. The FEB is not a
SNAPP module (does not count toward the total of 24 supported by
each control panel).
120120--2542……………………………………………….…………..……………...….….Worldwide Modem2542……………………………………………….…………..……………...….….Worldwide Modem
100100--2545……………………………...…….…….……....Enhanced 82545……………………………...…….…….……....Enhanced 8--Zone Input Expander PCB onlyZone Input Expander PCB only
100100--2556………………………………...…........Enhanced 82556………………………………...…........Enhanced 8--Zone Input Expander in metal housingZone Input Expander in metal housing
100100--2544……………………………...…….…….…......Enhanced 162544……………………………...…….…….…......Enhanced 16--Zone Input Expander PCB onlyZone Input Expander PCB only
100100--2546………………………………...…......Enhanced 162546………………………………...…......Enhanced 16--Zone Input Expander in metal housingZone Input Expander in metal housing
Enhanced input expanders are fully supervised SNAPP bus modules
that increase the detection device capability of the Chubb AFx™ sys-
tem. They support customizable resistance values and remote diagnos-
tics (diagnostics available via Director Security Management software).
VBus local expanders (see page 23) may be added to each enclosure,
and do not count toward the maximum of 24 supported by the Chubb
AFx™ control.

Chubb AFx™ Control
8-Input(100-2556) or 16-Input (100-2546)
SNAPP Expansion Module in Metal Housing
- room for two Vbus input or
output modules in housing
The 8 or 16-input SNAPP expansion
module occupies one of the 24 available
SNAPP slots .
Up to 16 VBus inputs
(2 x 8 VBus module 100-2549)
OR
Up to 16 VBus outputs
(2 x 8 VBus module
100-2547 [Transistor] or
100-2548 [Dry Contact])
without an additional
SNAPP module assignment
A combination of one Vbus Input & one
Vbus Output module may also be used.
12 Inputs
2 Relay Outputs
VBus Local Expansion Modules
Vbus Input / Output modules connect to designated terminals on the Chubb AFx™ control panel
and SNAPP expansion modules to provide increased input / output support locally without occu-
pying additional SNAPP module slots.
Intelligent Power Supply Module
in Metal Housing (100-2543)
- room for three Vbus modules in housing
The Intelligent Power Supply module
(100-2543) occupies one of the 24
available SNAPP slots
A maximum of 16 Vbus inputs
(2 x 100-2549) may be added
or
A maximum of 24 Vbus outputs
(3 x 8 VBus module
100-2547 [Transistor] or
100-2548 [Dry Contact])
may be added
without an additional
SNAPP module assignment
Application Modules
A combination of Vbus Input &
Vbus Output modules may also be used
100100--2547……………………………...………………………............VBus 8 Transistor Output Module2547……………………………...………………………............VBus 8 Transistor Output Module
100100--2548……………………………..…………………………………......VBus 8 Relay Output Module2548……………………………..…………………………………......VBus 8 Relay Output Module
100100--2549……………………………...……………………….................................VBus 8 Input Module2549……………………………...……………………….................................VBus 8 Input Module
12 Inputs
2 Relay Outputs
12 Inputs
2 Relay Outputs
One Vbus Input module (100-2549)
OR
one Vbus Output module
(100-2547 [Transistor] or
100-2548 [Relay])
Tampered Enclosure
Connection MUST be
mechanically protected
(i.e. conduit)
Maximum connection
length is six feet.
SNAPP
Communications
Bus
SNAPP
Communications
Bus

SMART / High-Security Communications / Printer Module
This module is an interface to upgrade sites using the Chubb SMART concentrator to
AFx™ system compatibility. It is capable of supporting up to 64 input points and 80
output points. It includes a high-security communications module for MK7 DVAC en-
crypted alarm reporting . Also onboard is a printer connection. Counts as three mod-
ules on an AFx™ system.
High-Security Communications Module
The high-security communications module uses DVACS communications to
send alarm and event information to the central monitoring facility. The communi-
cator is polled every 90 seconds by the central station and if the unit does not re-
spond during this poll it is an indication that disconnection or failure has occurred.
For additional information on DVACS see the Communications Guide (page 77).
Input Expansion Modules
Input expansion modules are used to add monitored security devices
(intrusion, panic, fire, etc ) to the Chubb AFX™ when system requirements ex-
ceed the 12-device capacity of the AFx™ main control panel. They also add out-
puts to the 2 base output points on the panel’s motherboard. All inputs are su-
perviseable with the included 2.2 kΩ resistors.
The expander without annunciation is used mainly to add monitored input points
(intrusion, fire or process control). The LED annunciator model is typically used
for two reasons: to provide visual feedback on the state of the system (the LEDs
can be configured to activate for virtually any system event, whether it relates to
that particular expander or not) or to provide additional output points.
The expansion modules are available in 8 and 16 input versions, both with and
without LED annunciation.
Application Modules
100100--2530………………………………………………………………...………..………..8 Point Expander2530………………………………………………………………...………..………..8 Point Expander
100100--2531……………………………………………………….……...…….….8 Point Expander w/ LEDs2531……………………………………………………….……...…….….8 Point Expander w/ LEDs
100100--2533…………………………………………………………………………...…..…16 Point Expander2533…………………………………………………………………………...…..…16 Point Expander
100100--2534…………………………………………………….…………………16 Point Expander w/ LEDs2534…………………………………………………….…………………16 Point Expander w/ LEDs
100100--2726…………………………………...……...…....SMART module with Drill2726…………………………………...……...…....SMART module with Drill--through protectionthrough protection
100100--2746…………………………………………...……..SMART module NO Drill2746…………………………………………...……..SMART module NO Drill--through protectionthrough protection
100100--2561……………………...............................................................................HSC / Printer Module2561……………………...............................................................................HSC / Printer Module

Two-door controller in small metal cabinet. Includes one 2-door controller
PCB and one power supply. Room has been left for a second power
supply (for the door strikes or magnetic lock) and batteries.
Access Modules add integrated access control to the AFx™ system (the Feature Expansion
Board is also required for access control). All AFx™ access components are based on a two-door
controller printed circuit board and are available in a variety of single and multiple door configura-
tions : each application’s unique requirements will determine the specific packages and accesso-
ries quoted. AFx™ Access Modules can be installed up to 2000 feet away from the main control
panel, on the system’s fully supervised SNAPP communications bus.
All AFx™ access modules feature the following:
Inputs: Door contacts, request to exit sensors, auxiliary input (may be used to supervise maglocks
or activate a door opener for physically challenged users).
Outputs: Door Unlock, Door Held or Door Forced Open, Challenged Unlock
2 Door / 4 Reader Access Module in Metal Enclosure
The large enclosure accommodates up to four of the
AFx™ two-door modules for a possible total of eight con-
trolled doors per multiple controller assembly : a two-door
expander board can be added to the two, four and six
door assemblies to increase the access capability of a
system at any time. Power supplies and backup batteries
included. Note : an additional power supply for the door
strikes/ magnetic locks and the associated rechargeable
batteries will be required.
Multiple Door Controller in Metal Enclosure
8-door controller shown in large cabinet.
(Four 2-door boards and 2 power supplies)
Access Control
100100--8102…………………..……………………………….……..28102…………………..……………………………….……..2--Door Controller in Small EnclosureDoor Controller in Small Enclosure
100100--8105……………...………………………………..…....28105……………...………………………………..…....2--Door Controller in Large EnclosureDoor Controller in Large Enclosure
100100--8104…………………...…………………………….…...…..48104…………………...…………………………….…...…..4--Door Controller in Large EnclosureDoor Controller in Large Enclosure
100100--8116………………..........…...28116………………..........…...2--Door AddDoor Add--on / Power supply for 100on / Power supply for 100--8104,1008104,100--8105,1008105,100--81068106

GProx II Readers and Tokens
100100--5459……………………………………………………....…Mullion Mount Proximity Reader, Grey5459……………………………………………………....…Mullion Mount Proximity Reader, Grey
100100--5469………………………………………………….…….Mullion Mount Proximity Reader, Black5469………………………………………………….…….Mullion Mount Proximity Reader, Black
100100--5485………………………………………………..………..…Mullion Mount Arming Station, Grey5485………………………………………………..………..…Mullion Mount Arming Station, Grey
100100--5495………………………………………………………......Mullion Mount Arming Station, Black5495………………………………………………………......Mullion Mount Arming Station, Black
GProx II proximity access tokens provide convenient, reliable
access control operation without the wear and tear of card
technologies requiring physical contact. The cards provide a
read range of up to 6 inches and the key fob has a range of up
to 4.5 inches. Chubb-logoed badge reels (with belt clip) and
lanyards are also available for use with slot-punched cards.
Proximity card technology is currently the most popular access token
technology on the market. Proximity readers emit an electronic field that
excites components embedded in the access token itself—this excita-
tion results in the token generating a number that is ‘read’. The unique
number produced by this process acts as an identifier for the individual
carrying the token. Because there is no physical contact required be-
tween the reader and the token the longevity of proximity readers and
tokens is much greater than older friction-based technologies.
GProx II™ readers offer superior read range in a sealed, weatherproof enclosure. They are
available in black and grey, mullion and switchplate styles.
GProx II™ arming stations add a keypad to the reader design for enhanced security : these can
be programmed to require the use of a Personal Identification Number (PIN) in addition to the
presentation of an access token. This functionality can be associated with individual doors and to
a schedule to provide a greater level of security in specific areas or after hours. Users can also
enter their card or User ID/PIN through the keys to arm and disarm areas, unlock doors etc ac-
cording to their level of authority in the system.
100100--2027……………………...G Prox II cards, Durable ABS plastic clamshell design, pack of 252027……………………...G Prox II cards, Durable ABS plastic clamshell design, pack of 25
100100--5735………………………………………….....Adhesive photo overlay for 1005735………………………………………….....Adhesive photo overlay for 100--2027, pack of 252027, pack of 25
100100--2032…………………………...……G Prox II Photo ID, ISO thickness PVC plastic, pack of 252032…………………………...……G Prox II Photo ID, ISO thickness PVC plastic, pack of 25
100100--2037……………......G Prox II Twin, same as 1002037……………......G Prox II Twin, same as 100--2032 with non2032 with non--encoded magstripe on cardencoded magstripe on card
100100--2039……………..……….……………………..G Prox II Key Fobs, for keychain use, pack of 252039……………..……….……………………..G Prox II Key Fobs, for keychain use, pack of 25
100100--2040……………..……………….…………….....G Prox II Key Fob, for keychain use, single fob2040……………..……………….…………….....G Prox II Key Fob, for keychain use, single fob
100100--5800……………..……………….…………………........Chubb5800……………..……………….…………………........Chubb--logoed Badge Reel with Belt Cliplogoed Badge Reel with Belt Clip
100100--5801……………..……………….………………….....................................Chubb5801……………..……………….………………….....................................Chubb--logoed Lanyardlogoed Lanyard

MIFARE technology utilizes contactless smart cards to
which data can be written as well as read, providing multi-
ple applications on a single card. MIFARE technology’s
13.56MHz operating frequency provides fast, reliable, se-
cure communications with high data integrity. For access
control, MIFARE smart card systems provide the conven-
ience, long life, and low maintenance of proximity card sys-
tems with the added benefit of multiple applications.
Mifare Readers and Tokens
120120--5442……………………………………………………........................…Mifare Switchplate Reader5442……………………………………………………........................…Mifare Switchplate Reader
120120--5444………………………………………………….………………….Mifare Mullion Mount Reader5444………………………………………………….………………….Mifare Mullion Mount Reader
100100--5445………………………………………………..………………..…Mifare Arming Station Reader5445………………………………………………..………………..…Mifare Arming Station Reader
120120--4001……………………………………………………………………………………..Mifare ISO Card4001……………………………………………………………………………………..Mifare ISO Card
120120--4011………………………………………………………………………………………..Mifare Keyfob4011………………………………………………………………………………………..Mifare Keyfob
120120--4021…………………………………………………………………………Mifare Self4021…………………………………………………………………………Mifare Self--Adhesive DiscAdhesive Disc
120120--4041………………………………………………………………………. Mifare card with Magstripe4041………………………………………………………………………. Mifare card with Magstripe
Chubb MIFARE tokens have a large memory which may be used for up
to 16 applications. Applications can be read only or read/write.
• Each card has a unique serial number.
• Wireless transmission between the card and the reader is encrypted.
• Each application is separate and protected by a 48 bit key.
• Only the sector containing GProx II token information is read by
Chubb MIFARE readers.
Mutual authentication is provided between card and reader to ensure
that the card being presented is valid. High security ensures that cards
cannot be duplicated and data cannot be compromised.
The large memory of MIFARE technology cards support storage of user
biometrics such as fingerprints (single or multiple). This ensures that a
card is not loaned or shared among users. Cardholder privacy is pro-
tected because the biometric templates are kept on the card rather than
stored in a central database.
MIFARE readers produce a Wiegand output thus allowing MIFARE cards and readers to be retro-
fitted to any existing Wiegand based access control system. The arming station reader supports
AFx Card + PIN functionality as well as standard GProx II arming station commands. Chubb MI-
FARE readers are designed to read the token sector from the MIFARE cards shown below.

Biometric Readers
Fingerprint readers provide an additional level of security by requir-
ing a positive comparison between a stored mathematical template
and the user’s live print. When the comparison is positive, Weigand
information from the access token for that user is sent to the AFx™
access module for processing.
There are two versions:
• A 4000 template Weigand input model for use with already in-
stalled or separate readers (i.e. GProx II readers) : it can also be
operated in standalone mode that requires no access tokens
(supports 500 templates in this mode)
• A model with a built-in HID proximity reader : ideal for sites al-
ready using HID readers and cards.
Veri-admin software (included with reader) is used to enroll and
manage the users.
Hand Geometry readers take more than 90 measurements of the user’s
hand and compare the resulting information (size relationships between
palm, fingers, etc.) with a previously enrolled read of the hand. The LCD
display is used to enroll users locally : units may also be networked to
provide software management . The units support 512 users but may be
expanded to support more than 35,000.
Existent access readers may also be connected to the hand geometry
reader : information from the access token used with the reader will be
passed to the access controller if the hand geometry comparison is posi-
tive.
Three versions are available:
• Standard indoor model (shown)
• A rugged metal housed version for tough commercial environments
• A cold weather model designed to withstand harsh winter conditions
120120--2114………………………………………..….………………...Handkey II Hand Geometry Reader2114………………………………………..….………………...Handkey II Hand Geometry Reader
120120--2115………………………………………..….……...ID3D Metal Housed Hand Geometry Reader2115………………………………………..….……...ID3D Metal Housed Hand Geometry Reader
120120--2116……………………………………………....Blizzard Cold Weather Hand Geometry Reader2116……………………………………………....Blizzard Cold Weather Hand Geometry Reader
120120--2110……………….……..….Weigand Input / Fingerprint Reader with 4000 template support2110……………….……..….Weigand Input / Fingerprint Reader with 4000 template support
120120--2113……...……….Integral HID Proximity & Fingerprint Reader with 4000 template support2113……...……….Integral HID Proximity & Fingerprint Reader with 4000 template support
120120--2112……….……….....RS 485 Converter connects PC to multiple readers for programming2112……….……….....RS 485 Converter connects PC to multiple readers for programming

AFx™
Elevator
ModuleSNAPP Bus
Relay
Enclosure/
Relay
Modules
Elevator
Company
Control
Box
Floor Selection Relay Connections
Call Button
Report Outputs
AFx™ Control Panel
Elevator Control
Chubb AFx™ elevator controllers provide access control for up to 1,920 individual cabins (cabs) for
up to 120 floors per cab per Chubb AFx™ account. The Feature Expansion Board is required for
elevator access control.
There are two basic modules for elevator control : the elevator access module, housed in a small
cabinet (identical to the 2-door controller) which connects to the AFx™ SNAPP bus, and the relay
module, a separately powered board that has eight relays for interfacing with elevator control
equipment.
The 2-cab controller controls all relays for two elevator cabs. The first expansion cabinet will house
an isolator board for each cab : this board’s function is to isolate the “clean” data communications
hardware from the “noisy” elevator button hardware and relays. One isolator board is necessary for
each cab, no matter how many floors the cab will serve.
The available packages also include metal cabinets to house the modules and associated power
supplies. Isolator filters are used to protect the AFx™ from interference generated in the elevator
cables. Elevator control requires minimum Director Level 1 software (see pages 32-44) for
configuration and programming.
100100--8151……………………………………………….…………………………Elevator Starter Package8151……………………………………………….…………………………Elevator Starter Package
Dual Cab module in small cabinet, 1 isolator, Relay enclosure with 1 relay board, 12v 2.5A powerDual Cab module in small cabinet, 1 isolator, Relay enclosure with 1 relay board, 12v 2.5A power
supply, batteries & transformers.supply, batteries & transformers.
100100--8152…………………………………………………………………….…...Relay Expansion Cabinet8152…………………………………………………………………….…...Relay Expansion Cabinet
Large cabinet, 1 relay board and 12v 2.5A power supply, battery & transformer. Holds up to 4 relayLarge cabinet, 1 relay board and 12v 2.5A power supply, battery & transformer. Holds up to 4 relay
boards.boards.
100100--8153…………………………………………………………………….………Elevator Relay Module8153…………………………………………………………………….………Elevator Relay Module
Controls up to 8 floors, board only.Controls up to 8 floors, board only.
100100--8154…………………………………………………………………….……Elevator Isolator Module8154…………………………………………………………………….……Elevator Isolator Module
Required for each elevator cab. Add to the 100Required for each elevator cab. Add to the 100--8151 package if both elevator cabs will be used8151 package if both elevator cabs will be used..
100100--8155…………………………………………………………………………...RS485 Reader Interface8155…………………………………………………………………………...RS485 Reader Interface
Required if elevator access reader distance exceeds 500 feet (152 meters).Required if elevator access reader distance exceeds 500 feet (152 meters).

Suite Security
Modules
Each module supports up to eight users, has a panic function and provides a programmable
output for local use. Monitoring of the protected suites is accomplished through Director Level
1 software, which is required for set up and programming. For important notes regarding the use
of the suite security module please see page 38.
MAP Graphic Module
The MAP graphic annunciator allows you to illuminate any 16
of the 70 LEDs on board : these can be used to provide visual
annunciation of virtually any event on the AFx™ system. The
map is fully configurable and the provided display template can
be easily customized and printed. Ideal for applications where
local identification of areas, doors, input points etc is required
for on site or remote response personnel.
AFx™ suite security modules are designed to provide local
security to suite tenants : although they are connected to the
AFx™ control panel, the tenants will use each as if it were a
self-contained security system with two or eight zones
(depending on the model installed).
Application Modules
120120--7140…………………………………………..…...………...…87140…………………………………………..…...………...…8--Zone Suite Security Module WhiteZone Suite Security Module White
120120--7141……………………………………………………..…..…..87141……………………………………………………..…..…..8--Zone Suite Security Module GreyZone Suite Security Module Grey
120120--7144……………………………...………..……...……27144……………………………...………..……...……2--Zone Suite Security Module (White only)Zone Suite Security Module (White only)
100100--7140…………………………….…..…...………...…Suite Security Module User’s Guide English7140…………………………….…..…...………...…Suite Security Module User’s Guide English
100100--7141…………………………….…..…...………....…Suite Security Module User’s Guide French7141…………………………….…..…...………....…Suite Security Module User’s Guide French
100100--2565………………………………….…………...................Multi2565………………………………….…………...................Multi--Area Annunciation Panel WhiteArea Annunciation Panel White
100100--2566………………………….……..….................................Multi2566………………………….……..….................................Multi--Area Annunciation Panel GreyArea Annunciation Panel Grey
Fire Supervision Module
Provides up to 8 Class ‘A’ or ‘B’ Fire type supervised inputs, as well as ground fault
detection : 100-2537 includes a wire-in transformer. Required for ULC listed Fire Moni-
toring applications.
100100--2537……………………………………………………………..Fire Module w / wire2537……………………………………………………………..Fire Module w / wire--in transformerin transformer
100100--2538………………………………………………………………………………………….Fire Module2538………………………………………………………………………………………….Fire Module

AFx™ wireless receiver modules add support for up to 32 wireless transmission devices : each is
learned into the receiver and is identified individually on the AFx™ system, both locally and in offsite
transmissions. Regular check-in signals verify each transmitter’s presence and operational status :
low battery conditions are also monitored via the AFx™. Both narrow-band and spread spectrum re-
ceivers support a wide variety of sensors including motion, glassbreak, smoke and panic devices.
For a list of supported transmitters see the AFx™ Quick Reference Guide.
Wireless Transmission
Narrow band wireless transmission operates
on a frequency of 319.5 mHz, with a typical
open field line-of-sight range of 500 feet. The
narrow band wireless receiver connects to the
SNAPP communications bus, further enhanc-
ing effective range. In addition to a compre-
hensive range of wireless sensors, a hand-
held keypad is also available—complete with
wall mount bracket—for local control of the
AFx™ system.
Narrow Band Wireless
Receiver / Transmitters
Spread Spectrum Wireless
Receiver / Transmitters
Spread spectrum wireless transmission uses a
shorter wavelength (900 mHz) and 10 times the
transmission power of traditional narrow band
technology to deliver open field line-of-sight
range of over two thousand feet, ideal for large or
challenging commercial environments. The
spread spectrum wireless receiver connects to
the SNAPP communications bus, further en-
hancing effective range. Indoor and outdoor re-
peaters are also available to extend transmission
range up to four miles open field line-of-sight.
100100--2550…………………………………………………………………Narrow Band Wireless Receiver2550…………………………………………………………………Narrow Band Wireless Receiver
120120--9240……………………………………………………………Spread Spectrum Wireless Receiver9240……………………………………………………………Spread Spectrum Wireless Receiver

Director Base System…………….………..…….34
Director Level 1……………..…………..…………35
Director Level 2…..……………………………..…40
The Base system incorporates intrusion protection for up to 256 security devices and
access control for up to 16 doors. It can be configured and operated easily with an
LCD keypad or through Director Security Management software.
Director Level 1 is required when an application’s needs have exceeded the capacity
of the Base system or when specialized features such as elevator control, suite secu-
rity or multiple panel operation will be required. Director Security Management soft-
ware is required for setup, programming and maintenance.
Director Security Management Software
Director Level 2 maximizes the capabilities of the system to support database query,
open database functionality and support for as many as 64,000 users with the addition
of RAM expansion chips.
Photo-badging, automated user data transfer, Web Browser and System Support
Agreement licenses augment Director’s management features.
Director Software Licensing Chart…………..…45
Add-on Licenses………………………….……....41
Capacities and features of each level of Director software and upgrade / add-on paths
for each are shown on this simple chart.
Director and AFx Feature Set Support...…..….33
Director licensing is necessary to expand the AFx™ system beyond its basic function-
ality : this chart shows the Feature Sets supported by each level of Director software.
Upgrading Firmware & Software…………….…47
When upgrading AFx™ sites, it’s important to understand the relationship between
the firmware revision of AFx™ panels and the version of Director software installed.

The Feature Set chart on page 10 illustrates how the AFx system uses hardware expansion to
achieve its maximum capacities in terms of users, areas, doors, etc. : it’s also necessary to use
Director software for management of the system when multiple sites, multiple panels or any of
the capacities associated with Feature Set 5 or higher are required. The chart above shows Fea-
ture Set support provided by the three levels of Director software licensing.
Additional RAM expansion for each AFx panel in a system is needed only when the higher ca-
pacities are required - for example, if an application using Director Level 2 will have no sup-
ported sites with more than 4,000 users, it is unnecessary to add RAM expansion to any of the
panels. If one or more of the sites will have to support more than 4,000 users, the appropriate
RAM expansion will be required for the panels in those systems but unnecessary for the others.
In addition to expanded capacities, the higher levels of Director software provide additional fea-
tures such as networking capability, dynamic mapping / live camera views, and elevator / suite
security. The following pages discuss each level of Director licensing and the various features
they incorporate. To quickly determine whether a specific feature is supported by a level of Direc-
tor software, see the chart on page 45.
Director and AFx Feature Sets
Feature Set 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Users 20 100 300 1000 1000 2000 4000 10,000 10.000 20,000 20,000 20,000 64,000 64,000
Doors per panel 16* 16* 16* 16* 32 * 32* 32* 32* 32 * 32* 32* 32* 32* 32*
Schedules 50 50 50 100 100 100 100 250 250 250 250 250 250 250
Authority Levels 30 30 30 100 100 100 100 500 500 500 1000 1000 1000 1000
Multiple Panels No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Elevator Control No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Points per panel 256 256 256 256 256 256 256 256 256 256 256 256 256 256
Outputs per panel 128 128 128 128 128 128 128 128 128 128 128 128 128 128
Areas per panel 16 16 16 16 16 16 16 16 16 16 16 16 16 16
Event Buffer 1024 1024 1024 2048 2048 2048 2048 8192 8192 8192 16,364 16,364 65,536 32,768
Holidays 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Suite Security No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Director Level 2 supports up to Feature Set 14
Director Level 1 supports up to Feature Set 9
Additional RAM is required for AFx™
Feature Sets 8 through 14
#120-8910 #120-8920 #120-8964
Director Base License
supports up to Feature Set 4

Director Base Package
100100--7611………..................................................................Version 4 Director Base Level Software7611………..................................................................Version 4 Director Base Level Software
100100--7621………..................................Version 3 Base (1007621………..................................Version 3 Base (100--8601) Upgrade to Director Base Level8601) Upgrade to Director Base Level
Chubb AFx™ Director Base Software Supports:
• A single PC / single AFx control panel
• Up to 24 application modules
• Up to 256 Detection Devices
• 16 Areas
• 16 Doors
• 1000 Users
• Two Concurrent Network Clients
• 1 nVE DVR license
• 1 Communications Client
• Optional support for Episuite photo-badging license ( see page 25 )
LCD Keypad
Application Module 1
SNAPP BUS SNAPP BUSSNAPP BUS
AFx™ Control
Panel
Point Expander
Application Module 2
Up to
24 modules
Total
Multiple Door Controller
Application Modules 3-6
The Director Base software package is a single PC application designed to manage an AFx™
system consisting of one control panel (one site) with a maximum of 256 security devices (such as
door contacts or motion detectors), with support for up to 1,000 users and 16 doors of access con-
trol. A total of 24 application modules may be connected to a single AFx™ control panel. These
modules include LCD keypads, input point expanders, access control modules, high security com-
munications and map modules. The example shown below includes a multiple door controller
package containing four two-door access modules.
Base systems can be completely configured and managed using the LCD keypad, even for access
control applications. Director software is optional for such systems and may be added at any time
to enhance system management.
Base systems using Director software can be connected directly on site in order to diagnose the
system, troubleshoot it, and download or backup the user’s database. The software can also con-
nect remotely via modem or static IP connection. The software allows an authorized user to config-
ure the system and to remotely retrieve reports, system status and other information.

Director Server PC Director Workstation Director Workstation
Local or Wide Area Network Local or Wide Area Network
Networking Director allows more than one computer to use the Chubb AFx™ database so opera-
tors at multiple workstations can connect to AFx™ systems for programming,control and
status.The license key is connected to a USB port on the Director server PC (typically not the site’s
network server). Each of the Director workstations will have a GUI (Graphic User Interface)
installed during system setup which allows it to access and interact with the Director database.
Operators will have only the privileges associated with their Director login (independent from their
network privileges) which is controlled by the software administrator. Each workstation can also be
programmed with a set of permissions that will apply independent of an operator’s permissions.
Chubb AFx™ Base software supports two concurrent client workstations (GUIs) per software
installation : this means any two PCs with the Director Operator client installed can interact with the
server PC simultaneously. There is a timeout associated with each operator’s login that logs them
off after a specified period of inactivity in the application, ensuring other operators will eventually
gain access should others forget to log off.
TWO CONCURRENT NETWORK CLIENTS

MULTIPLE PANEL CONNECTIVITY
Multiple AFx™ panels can be connected together to go beyond the capabilities of the Base sys-
tem : (up to 30 panels per physical connection). Local users of the system will control only the ar-
eas and doors associated with each individual panel. For example:
• Modules connected to Panel 1 in the example shown above are assigned to the Office area
• Modules connected to Panel 2 in the example shown are assigned to the Warehouse area
• Local users will only be able to control Office areas/doors from Panel 1’s associated LCD
keypads (according to their assigned Authority Levels)
• Local users will only be able to control Warehouse areas/doors from Panel 2’s associated
LCD keypads (according to their assigned Authority Levels)
User, schedules and authorities are shared by the entire system : Director software is required to
manage these common elements and also provide an overview of the AFx™ system to operators.
This is important because it allows a software operator to relate to the system as a continuous se-
ries of areas and doors instead of physically separate panels and modules.
Up to 60 panels may be connected over three communications clients to function as a single inte-
grated intrusion/access system. As with the Base system, each individual panel can support up to
24 application modules. A Level 1 system can support up to 960 areas / 7,680 input points / 1,920
doors per account.
AFx™ Director software Panel 1 Office Panel 2 Warehouse
Director Level 1 Package
• Multiple Panel Connectivity
• Up to 32 Doors /Elevator Cabs per panel
• Visual Director
• Elevator Access Control
• Up to 4,000 user without RAM upgrade
• Up to 10,000 Users with RAM upgrade
• Suite Security
• 10 Concurrent Network Clients
• 10 Accounts (AFx™ sites)
• Optional support for photo-badging and
Web Browser access (separate licenses -
see pages 41 & 42 for details)
Chubb AFx™ Director Level 1 Supports:
100100--7615………....................................................................Version 4 Director Level One Software7615………....................................................................Version 4 Director Level One Software
100100--7614………...................................Version 4 Base (1007614………...................................Version 4 Base (100--7611) Upgrade to Director Level One7611) Upgrade to Director Level One
100100--7622………...................................Version 3 Base (1007622………...................................Version 3 Base (100--8601) Upgrade to Director Level One8601) Upgrade to Director Level One
100100--7623….Version 3 Plus/Premium/Elite (1007623….Version 3 Plus/Premium/Elite (100--8602/8603/8608) Upgrade to Director Level One8602/8603/8608) Upgrade to Director Level One

VISUAL DIRECTOR
Visual Director shows software operators critical event
and status information via full color animated icons on
maps of the Chubb AFx™-controlled premises. Maps in
all standard formats may be imported into Director and
configured in any one of up to fifteen customizable map
views. These views - accessible at the touch of a button
- can also contain live camera feeds via connection to a
Chubbview (Netvision) system. Operators can also
control the Chubb AFx™ directly from the map icons.
NOTE : support for NVe and March Networks R4 & R5
Series DVRs must be added via upgrade options shown
on page 43.
Visual Director also includes Photo Verification.
Each user of the Chubb AFx™ can have an asso-
ciated photograph stored in the Director database :
when users are granted access at designated
doors on an AFx™ site, the user’s photo will be
displayed on the Director PC with their name and
the date and time of access. Photos can be shown
singly or in groups of four or nine, and set to dis-
play for a specific time period or indefinitely.
32 ACCESS DOORS PER PANEL
Level 1 supports up to 32 access-controlled doors per each Chubb AFx™ panel (compared to 16
per panel with the Base Package) in single and multiple panel installations. Each door has In/Out
reader capability.
IMPORTANT: Any elevator cabs assigned to an AFx™ are considered to be access-controlled
doors and must be subtracted from the 32 available on each panel : for example, if an AFx™ panel
on a site is controlling floor access for six elevator cabs, the total number of doors that can be sup-
ported before another AFx™ panel is required is 26.

NETWORKING
Director Server PC Director Workstation Director Workstation
Local or Wide Area Network Local or Wide Area Network
Networking Director allows more than one computer to use the Chubb AFx™ database so opera-
tors at multiple workstations can connect to AFx™ systems for programming,control and
status.The license key is connected to a USB port on the Director server PC (typically not the site’s
network server). Each of the Director workstations will have a GUI (Graphic User Interface)
installed during system setup which allows it to access and interact with the Director database.
Operators will have only the privileges associated with their Director login (independent from their
network privileges) which is controlled by the software administrator. Each workstation can also be
programmed with a set of permissions that will apply independent of an operator’s permissions.
Chubb AFx™ Level 1 supports up to ten concurrent client workstations (GUIs) per software
installation : this means up to ten PCs equipped with the Director Operator client can interact with
the server PC simultaneously. There is a timeout associated with each operator’s login that logs
them off after a specified period of inactivity in the application, ensuring other operators will eventu-
ally gain access should others forget to log off.
Communications clients are the components of Director software that control the process of
communication between the AFx™ database and the actual systems. Each client can be associ-
ated with one of three physical communications mediums (direct connection, dial-up modem or via
static Internet Protocol address). The different options can be used in any combination up to a
maximum of three simultaneous live communications clients. This flexibility allows whatever combi-
nation of local or remote connections will best suit a particular Director application.
3 COMMUNICATIONS CLIENTS
10 ACCOUNTS (SITES)
AFx™ Level 1 has support for up to 10 accounts : different physical sites that
will each have their own shared set of users, authorities, areas etc.

SUITE SECURITY
ELEVATOR CONTROL
Elevator control restricts access to floors according to a user’s authority level. The elevator mod-
ule supports two cabs and can control access to a maximum of 124 floors per cab. When a user
presents an access token to the reader associated with a controlled cab and selects a floor, relays
on the relay module change state to allow the floor selection to pass to the elevator control circuitry
: if the authority level assigned to the user does not allow access to the floor in question, the relay
for that floor does not change state so the elevator control does not ‘see’ the button being pressed.
The elevator module monitors the elevator control’s outputs to indicate which floor was selected
after floor access was granted. A termination period can also be programmed to limit the amount of
time a user can select a floor after the access token is presented.
AFx™
Elevator
ModuleSNAPP Bus
Relay
Enclosure/
Relay
Elevator
Company
Control
Floor Selection Relay Connections
Call Button
Report Outputs
AFx™ Control Panel
Each AFx™ panel can support up to 60 suite
security modules, each of which will act as a local
alarm for the suite it is located in. Groups of eight AFx™
users are assigned for use with each of the modules :
there are five predefined authority levels available exclu-
sively for suite privileges. Suite users may also have access/intrusion privileges for
other areas of an AFx™ system not devoted to suite security (i.e. parking garage
access, main lobby door access). Suite security modules are available in two and
eight-zone versions. Note: for every standard AFx™ SNAPP module used with a panel, the
number of suite security modules supported by the same panel decreases by five.
IMPORTANT NOTE: There is currently no built-in provision for suite security events to
communicate off-site : alarms may be annunciated both audibly and visually at any Director
software worksations connected to the suite security system. The events will be tagged with a
name identifying the specific suite system at which the events are occurring.
For suite security applications requiring off-site alarm communications, the suite security modules’
output capability allows for a programmed connection - requiring no wiring - to unused input points
on the AFx™ system : this provides off-site alarm communication via whatever medium the AFx™
system is using to transmit event conditions, whether by digital or high security communications.

UP TO 10,000 Users / 8,192 Event Buffer / 500 Authority Levels
Director™ Level 1 has built-in support for up to 4,000 users, compared to 1000 on the Base sys-
tem. A RAM upgrade is available to achieve the full 10,000 user capacity of a Level 1 system.
The added storage also increases the capacity of the AFx™’s time-and-date stamped event buffer
to 8,192 per panel and the number of available authority levels to 500. Each panel in a multiple
panel application that requires increased capacities will require the same expansion chip.
RAM RAMRAM Director Licensing
Panel 1 Panel 2 Panel 3
120120--8910………………...RAM Expansion 10,000 Users / 8,192 event buffer / 500 authority levels8910………………...RAM Expansion 10,000 Users / 8,192 event buffer / 500 authority levels

100100--7618………....................................................................Version 4 Director Level Two Software7618………....................................................................Version 4 Director Level Two Software
100100--7616………...........................Version 4 Level One (1007616………...........................Version 4 Level One (100--7615) Upgrade to Director Level Two7615) Upgrade to Director Level Two
100100--7624....Version 3 Plus/Premium/Elite (1007624....Version 3 Plus/Premium/Elite (100--8602/8603/8608) Upgrade to Director Level Two8602/8603/8608) Upgrade to Director Level Two
120120--8920………………………… Up to 20,000 Users / 16,384 event buffer / 1000 authority levels8920………………………… Up to 20,000 Users / 16,384 event buffer / 1000 authority levels
120120--8964………………………... Up to 64,000 Users / 65,536 event buffer / 1000 authority levels8964………………………... Up to 64,000 Users / 65,536 event buffer / 1000 authority levels
USER / EVENT BUFFER / AUTHORITY LEVEL EXPANSION
PHOTO-BADGING
Photo-badging adds full badge design / printing functionality to Director
software : it’s also available as an add-on license for Director Level 1
packages. For a detailed description of photo-badging see Page 41.
Director Level 2 can support up to 64,000 users, 1000 authority levels and 65,536
events in the on-board event buffer with the addition of RAM to each of the panels
that make up the system. Two RAM expansion chips are available : one increases
the capacity of the AFx™ to handle up to 20,000 users (and increases the event
buffer and authority level limit as well), the other raises the user capacity to 64,000.
A RAM expansion must be added to every panel in a multiple panel AFx™
application that requires the increased capacities.
DATABASE QUERY
Database Query adds the ability to extract raw tables of data manually from
the Chubb AFx™ database for use with other data manipulation programs
(such as Microsoft Access or Crystal Reports) – this is useful when a site
requires sophisticated reports beyond the capability of Director’s built-in re-
port generator (the extraction process requires a login to access the data).
• Multiple Panel Connectivity
• Up 32 Doors /Elevator Cabs per panel
• Visual Director
• Elevator Access Control
• Suite Security
• 100 Accounts (AFx™ sites)
• Episuite Photo-badging
• Up to 4,000 users without RAM upgrade
• Up to 64,000 Users with RAM upgrade
• 10 Concurrent Network Clients
• Database Query
• Optional support for web browser access,
1000 AFx™ accounts, Enterprise Resource
Management data exchange (separate li-
censes -see page 42 for details )
Chubb AFx™ Director Level 2 Supports:

Badge design inserts custom user fields
directly from Director software
User photo and signature
from Chubb AFx™ database
Photo-badging integrates Episuite Guard Draw badge design software into Chubb
AFx™ Director. Photos and signatures can be captured live via any Windows™
based capture devices for use in the creation and printing of custom
badges : full graphic design and import features allow the insertion of logos,
backgrounds, ghost images and lines/shapes of any combination of colors.
Any of the 20 custom user fields in the Director database can be linked to a card
design for automatic insertion of such user information as deparent, employee
number, license plate, etc..or any other user-created fields relevant to the customer and the appli-
cation. The Photo-badging upgrade may be added to the Director Level 1 package (it’s included
in Level 2). Photo-badge printers and accessories appear below.
Director Photo Badging
Direct-to-card dye-sublimation printing technology
puts sharp, clear images directly onto the surface of
photo-ready access cards. The Medium-High Vou-
lume printer features the SmartScreen™ LCD Con-
trol Panel , a clear display of easy-to-understand
prompts and commands which shows the status of
your printing and encoding. Both printers include the
easy to replace SmartLoad™ disposable Ribbon
Cartridge for all-in-one print ribbon/card cleaning,
eliminating the need for a separate card cleaning
mechanism.
100100--6040……………………………………………………….……Low6040……………………………………………………….……Low--Medium Volume Badge PrinterMedium Volume Badge Printer
100100--6041……………………...250 Print Ribbon Cartridge for Low6041……………………...250 Print Ribbon Cartridge for Low--Medium Volume Badge PrinterMedium Volume Badge Printer
100100--6042……………………………………………………………Medium6042……………………………………………………………Medium--High Volume Badge PrinterHigh Volume Badge Printer
100100--6043…………………....400 Print Ribbon Cartridge for Medium6043…………………....400 Print Ribbon Cartridge for Medium--High Volume Badge PrinterHigh Volume Badge Printer
Badge Printers Low-Medium Volume
Badge Printer
Medium-High Volume
Badge Printer
SMARTLoad
Ribbon Cartridge
100100--8610……………………………………………………….…………………...…Photo Badge License8610……………………………………………………….…………………...…Photo Badge License

Advanced Features License
The Advanced Features License adds Open Database sup-
port so a site’s IT personnel can set up an ongoing dynamic ex-
change of user information (using a middleware application not
supplied by Chubb) between the AFx™ database and an exis-
tent database i.e an employee or student registry. Also adds
support for 1000 accounts. Requires Level 2 software licensing.
Web Browser License
The Web Browser license allows operators to log on to Direc-
tor Security Management Software using Internet Explorer at
any computer connected to the Local or Wide Area network.
Operators will have edit or view only access to the browser
screens according to the permission level assigned to them in
Director software. Requires Level 1 or Level 2 software.
100100--8611…………………………………………………………………………..….Web Browser License8611…………………………………………………………………………..….Web Browser License
Internet Protocol Module
The optional IP interface board installs in the first panel of an
AFx™ system and provides a connection from the Director
Security Management PC via static IP address on the prem-
ises’ network. Works with any level of Director software li-
censing : requires firmware V3.3 or higher.
• The RS485 Repeater extends the AFx™ RS485 multiple panel connection
by up to 2000 feet.
• The RS 485 coupler is used where multiple AFx™ panels are connected to
function as a single system over long distances. It allows a star configuration
of up to 10 branches : each leg of a branch may be up to 2000 feet in length.
RS485 Repeater/ Coupler
Director Upgrade Licenses & Accessories
100100--7619………………………………………………………………………Advanced Features License7619………………………………………………………………………Advanced Features License
120120--8102…………………………………………………………..…………..….Internet Protocol Module8102…………………………………………………………..…………..….Internet Protocol Module
120120--8535…………………………………………………………………………………….RS 485 Repeater8535…………………………………………………………………………………….RS 485 Repeater
120120--8536……………………………………………………………...…………RS 485 108536……………………………………………………………...…………RS 485 10--branch Couplerbranch Coupler

Director Upgrade Licenses
Increased Panel per Account / Comms Client Support
The default of 60 panels per account for Level 1 or Level 2 software pack-
ages can be expanded to 100 or 250 via license upgrade option (product
numbers listed below).
These licenses also increase the number of communications clients available
in Level 1 or Level 2 : the 120-8915 upgrade option adds support for up to 10
communications client / the 120-8917 upgrade option increases communica-
tions client support to a maximum of 25. The 120-8918 license is used to up-
grade 100 panel per account / 10 communications client systems to the 250
panel / 25 communication client limit.
Note : up to 30 panels are supported by each physical connection. Individual
panel capacities (input points, doors, etc.) remain unchanged for both the
Chubb AFx and Monitor AFx platforms.
120120--8915…………………………………………………………......….100 Panel per Account Upgrade8915…………………………………………………………......….100 Panel per Account Upgrade
120120--8917……………………………..250 Panel Per Account / 25 Communications Client Upgrade8917……………………………..250 Panel Per Account / 25 Communications Client Upgrade
120120--8918………........100 To 250 Panel per Account / 10 To 25 Communications Client Upgrade8918………........100 To 250 Panel per Account / 10 To 25 Communications Client Upgrade
The default for Level 1 & Level 2 software packages is 10 workstation
clients, expandable to a maximum of 50 in blocks of 5 with this license
upgrade option.
Increased Client Workstation Support
120120--8631……………………………………….......5 Additional Client Workstation Upgrade Option8631……………………………………….......5 Additional Client Workstation Upgrade Option
120120--8660……………………………...…….…Add 1 NVe DVR (incrementally to a maximum of 500)8660……………………………...…….…Add 1 NVe DVR (incrementally to a maximum of 500)
120120--8661……………………………………..Add 5 NVe DVRs (incrementally to a maximum of 500)8661……………………………………..Add 5 NVe DVRs (incrementally to a maximum of 500)
120120--8662…………………………...……...Add 50 NVe DVRs (incrementally to a maximum of 500)8662…………………………...……...Add 50 NVe DVRs (incrementally to a maximum of 500)
120120--8632……………………………………..………………….…...March Networks R4 or earlier DVR8632……………………………………..………………….…...March Networks R4 or earlier DVR
120120--8633……………….…..Add 1 March Networks R5 DVR (incrementally to a maximum of 500)8633……………….…..Add 1 March Networks R5 DVR (incrementally to a maximum of 500)
120120--8634……………….…Add 5 March Networks R5 DVRs (incrementally to a maximum of 500)8634……………….…Add 5 March Networks R5 DVRs (incrementally to a maximum of 500)
Support for the Chubb embedded NVe DVR and March Networks R4 and
R5 DVR’s requires a license upgrade via individual, 5 DVR, or 50 DVR li-
cense upgrades to an accumulated limit of 500 (For licensing to the sys-
tem maximum of 1000, contact Chubb Marketing for assistance).
NVe / March Networks DVR Integration

Software Support Agreements
Software Support Agreements extend the initial warranty
period of Director software to allow installation of later revi-
sions of the application. The installation process of any Direc-
tor software product compares the date on the USB license
Director Software
100100--8627……………………….…..….….Software Support Agreement for Director Base Systems8627……………………….…..….….Software Support Agreement for Director Base Systems
100100--8628……………………………....…Software Support Agreement for AFx™ Level 1 Systems8628……………………………....…Software Support Agreement for AFx™ Level 1 Systems
100100--8629……………………………...….Software Support Agreement for AFx ™ Level 2 Systems8629……………………………...….Software Support Agreement for AFx ™ Level 2 Systems
key - which is required on the Director server during installation and operation - and the date on
the application components being installed. If the date on the software being installed is later than
the date on the USB license key (shown in Field 4 of the screen capture to the right), an
‘Application Out of Warranty’ message will appear and the installation will not continue.
The SSA product numbers shown below extend the initial 12-month warranty period by an addi-
tional year for each one sold : the SSA must be consistent with the level of Director software the
site is running (Base, Level 1 or Level 2). Below are two examples of how the SSA would apply to
existing sites:
Example 1 : A site is running a release of Director Version 4 which was installed in March 2004 :
the SSA expiration date is March 2005. The latest revision contains some features of interest to
the customer, but its release date is July 2005, so the SSA Expiration Date will not allow installa-
tion of the new revision.
Resolution : The purchase of one SSA at the appropriate level is required (Base, Level 1, or
Level 2) – this will add 12 months to the SSA Expiration Date and entitles the site to no-cost (for
software) upgrades or patches for Version 4 until March of 2006.
Example 2 : A site is running a release of Director Version 4 installed in August of 2002 : the SSA
expiration date is August 2003. The latest revision contains some features of interest to the cus-
tomer, but its release date was July 2005, so the SSA Expiration Date will not allow its installation
Resolution : Each SSA adds 12 months to the original SSA Expiration Date: in this instance, the
site will require two SSA agreements at the appropriate level of licensing. After activation, the SSA
expiration field will be August 2005, which will allow installation of the upgrade.
A few more notes on the SSA:
• Director sites are entitled to upgrades with no charge for software for 12 months after installa-
tion – the SSA coverage is only required after the first year.
• The SSA can be purchased at any time prior to or after Director installation, and in quantities.
• The SSA expiration date will never affect the ongoing operation of a Director installation : it is
only checked during installation of a newer revision or patch.

License => BASE LEVEL 1 LEVEL 2
Users 1,000
4000
Up to 10,000 with 120-8910
4000
Up to 20,000 with 120-8920
Up to 64,000 with 120-8964
Doors 16 32 per panel 32 per panel
Networking
(Client Workstation) Support
No
10 Concurrent (add 120-8631 five
GUI licenses to expand to
a maximum of fifty clients)
10 Concurrent (add 120-8631 five
GUI licenses to expand to
a maximum of fifty clients)
Accounts (AFx Sites) 1 site 10 sites
100 sites
(Add 100-7619 Integrator License for
support for up to 1000 sites)
Number of Panels per Account1
1 60 60
Communication Clients 1 3 3
100 Panels per Account / 10
Comms Client Support
NO Add 120-8915 Add 120-8915
NO Add 120-8917 Add 120-8917
Upgrade from 100 panel per
account / 10 Comms Client to
NO Add 120-8918 Add 120-8918
Visual Director (Support for
dynamic mapping, Chubbview
DVRs, photo verification)
NO YES YES
nVE DVR Support 2
NO
120-8660 : 1 nVE DVR
120-8661 : 5 nVE DVRs
120-8662 : 50 nVE DVRs
To a maximum of 500.
120-8660 : 1 nVE DVR
120-8661 : 5 nVE DVRs
120-8662 : 50 nVE DVRs
March Networks DVR Support 3
NO
120-8632 : 1 R5 DVR
120-8633 : 5 R5 DVRs
120-8634 : 50 R5 DVRs
120-8632 : 1 R5 DVR
120-8633 : 5 R5 DVRs
120-8634 : 50 R5 DVRs
Photo-Badging NO
Add 100-8610
Photo-Badging License
YES
Elevator Module Support 4
NO YES YES
Suite Security
Module Support 5 NO YES YES
Web Browser
(10 concurrent clients)
NO Add 100-8611 Add 100-8611
Database Query and SQL
Server Support 6 NO NO YES
ERM Capability 7
NO NO
Add 100-7619 Advanced
Features License
Director Licensing Chart

Chubb AFx System Design Guide June 2009

Chubb AFx System Design Guide June 2009

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to Chubb AFx System Design Guide June 2009

Similar to Chubb AFx System Design Guide June 2009 (20)

Chubb AFx System Design Guide June 2009