This 2-day training course provides theoretical and practical instruction on dental implants. The first day includes tours of an implant factory and presentations on Bio3 implant products. Trainees will participate in hands-on demonstrations of implantation techniques and learn about marketing implants. The second day focuses on sales training and visits local dental-related sites. The course offers a comprehensive overview of dental implants using Bio3's product lines and supported by information on relevant anatomy, procedures, and testing results.
12. Bone classification
12
According to its density bone is classified into 4 types:
Type I Homogenous compact (cortical) bone
Type II Thick layer of compact bone surrounding a core of dense
trabecular (spongy) bone
Type III Thin layer of compact bone surrounding dense trabecular
bone
Type IV Thin layer of compact bone surrounding a core of low density
trabecular bone
15. Bio3 Implants Overview
15
Made in Germany
Pure Grade 4 titanium
Active and hydrophilic 3D surface which helps
facilitate the integration of the implant to the
bone (osseointegration).
17. Conical connection – Close Up
17
Source:Implantologie.(Vol.
15,2007Issue1,p.31-46)
Conical connection advantages:
Tight (sealed) connection
No micromovement
18. Test Report (Bio3 Implants)
18
Micro-movements of Implant-Abutment-Interface (Bio3 Implants – Implant Progressive ø 4,2) 23
3 Results
The results of the here-described study are represented in the following charts. According
to the investigational procedure, the occurrence of a micro gap between the implant and
the Abutment is shown.
Tab. 3 shows the results of the micro-gap [µm]. For all 5-inspection pieces the starting
picture with no load on it and the picture of the 200N load-cycle is shown.
Micro-gap Width [µm]
Load Inspection
piece 1
Inspection
piece 2
Inspection
piece 3
Inspection
piece 4
Inspection
piece 5
25N no space no space no space no space no space
50N no space no space no space no space no space
75N no space no space no space no space no space
100N no space no space no space no space no space
125N no space no space no space no space no space
150N no space no space no space no space no space
175N no space no space no space no space no space
200N no space no space no space no space no space
Tab.3 results of micro gap.width
Micro-gap Length [µm]
Load Inspection
piece 1
Inspection
piece 2
Inspection
piece 3
Inspection
piece 4
Inspection
piece 5
25N no space no space no space no space no space
50N no space no space no space no space no space
75N no space no space no space no space no space
100N no space no space no space no space no space
125N no space no space no space no space no space
150N no space no space no space no space no space
175N no space no space no space no space no space
200N no space no space no space no space no space
Tab.34 results of micro gap length
Micro-movements of Implant-Abutment-Interface (Bio3 Implants – Implant Progressive ø 4,2) I
Micro-Movements of
Implant-Abutment-
Interface
Test-Report
(Bio3 Implants – Implant Progressive ø 4,2)
Department of Prosthetic Dentistry
J. W. Goethe-University Frankfurt am Main
Director: Prof. Dr. H.-Ch. Lauer
Address:
Theodor-Stern-Kai 7,Haus 29
60596 Frankfurt a. Main
Date: 30. April 2015 Fax: (069) 6301-3711
E-Mail: Zipprich@em.uni-frankfurt.de Fon: (069) 6301-4714
Dipl.-Ing. H. Zipprich
23. Progressive implant: Protocol (standard)
24
Drill1.9
Drill2.0
Drill2.8
Drill3.0
BoneTapTSP3.3
1 2 3 4 6
RECOMMENDED DRILLING SPEED
D1 800-1200
D2 800-1200
D3 800-1000
D4 800-1000
D1 800-1000
D2 800-1000
D3 700- 900
D4 600- 800
D1 600- 800
D2 600- 800
D3 500-600
D4 400- 500
D1 500- 700
D2 600- 800
D3 500- 600
D4 400- 500
Profil
e
drillP3.2
5
bility.
ne
pes.
PRODUCT CODE
Progressive3.3
7
Implantation Protocol.*
* The Protocol does not replace an appropriate training.
** It is used in I and II bone types.
e 4
PTI3.3/10
PTI3.3/13
PTI3.3/11.5
10 mm 11.5 mm 13 mm
is included in each
implant set
TITANIUM COVER SCREW 2.1
ateral
eeth).
STANDARD
PLATFORM
2.1 mm
24. WIDE
PLATFORM
2.5 mm
Progressive implant: Protocol (wide)
25
14
ProfildrillP4.2
7
ø 3.6
2.5
PRODUCT CODE 8 mm 10 mm 11.5 mm 13 mm
Drill1.9
Drill2.0
Drill2.8
Drill3.0
Drill3.5
Drill3.9
BoneTapTSP4.2
Progressive4.2
1 2 3 4 5 6 8 9
PTIB4.2/8
PTIB4.2/11.5
PTIB4.2/13
PTIB4.2/10
Bio3 Implants | Progressive
Bio3IMPLA
RECOMMENDED DRILLING SPEED
D1 800-1200
D2 800-1200
D3 800-1000
D4 800-1000
D1 800-1000
D2 800-1000
D3 700- 900
D4 600- 800
D1 600- 800
D2 600- 800
D3 500- 600
D4 400- 500
D1 500- 700
D2 600- 800
D3 500- 600
D4 400- 500
D1 500- 700
D2 600- 800
D3 500- 600
D4 400- 500
D1 400- 600
D2 500- 700
D3 500- 600
D4 400- 500
is included in each
implant set
TITANIUM COVER SCREW 2.5
Implantation Protocol.*
* The Protocol does not replace an appropriate training.
** It is used in I and II bone types.
27. Advanced implant: Protocol (standard)
28
STANDARD
PLATFORM
2.1 mm
ProfildrillP3.2
6
ults
es.
ple
cess
y.
cro
nt
one
Drill1.9
Drill2.0
Drill2.8
Drill3.0
Advanced3.3
BoneTapTS3.3
1 2 3 4 87
PRODUCT CODE 10 mm 11.5 mm 13 mm
ATI3.3/10
ATI3.3/13
ATI3.3/11.5
RECOMMENDED DRILLING SPEED
D1 800-1200
D2 800-1200
D3 800-1000
D4 800-1000
D1 800-1000
D2 800-1000
D3 700- 900
D4 600- 800
D1 600- 800
D2 600- 800
D3 500- 600
D4 400- 500
D1 500- 700
D2 600- 800
D3 500- 600
D4 400- 500
Implantation Protocol.*
* The Protocol does not replace an appropriate training.
** It is used in I and II bone types.
is included in each
implant set
TITANIUM COVER SCREW 2.1
28. WIDE
PLATFORM
2.5 mm
Advanced implant: Protocol (wide)
29
ProfildrillP4.2
7
ø 3.1
PRODUCT CODE
ATIB4.2/8
ATIB4.2/11.5
ATIB4.2/13
ATIB4.2/10
8 mm 10 mm 11.5 mm 13 mm
Drill1.9
Drill2.0
Drill2.8
Drill3.0
Drill3.5
Drill3.9
BoneTapTS4.2
Advanced4.2
1 1 2 3 4 5 6 8 9
o3 Implants | Advanced
RECOMMENDED DRILLING SPEED
D1 800-1200
D2 800-1200
D3 800-1000
D4 800-1000
D1 800-1000
D2 800-1000
D3 700- 900
D4 600- 800
D1 600- 800
D2 600- 800
D3 500- 600
D4 400- 500
D1 500- 700
D2 600- 800
D3 500- 600
D4 400- 500
D1 500- 700
D2 600- 800
D3 500- 600
D4 400- 500
D1 400- 600
D2 500- 700
D3 500- 600
D4 400- 500
Implantation Protocol.*
* The Protocol does not replace an appropriate training.
** It is used in I and II bone types.
is included in each
implant set
TITANIUM COVER SCREW 2.5
30. Suprastructures: Healing caps (HC)
31
STANDARD
PLATFORM
2.1 mm
Standard diameter
Wide diameter
24
4.2 mm
5 mm
2 mm
5 mm
3 mm
5 mm
4 mm
5 mm
5 mm
5 mm
6 mm
5 mm
7 mm
2 mm
4.2 mm
3 mm
4.2 mm 4.2 mm 4.2 mm
4 mm 5 mm 7 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
ø 1.28
Length
Length
ø 4.2
MATERIAL Titanium Grade 5
Healing cap for standard platform (2.1 mm)
with two varios diameters – 4.2 mm and 5 mm.
It is installed using universal or hand
prosthetic insertion driver.
HEALINGCAPS
PRODUCT CODE
GFS2
GFS3
GFS4
GFS5
GFS7
STANDARD
2.1
INTERNAL HEX
HEALING CAPS
Standard platform
Bio3 Implants | Healing caps
Bio3IMPLANTS
PremiumDentalImplants
WIDE
ø 1.28
ø 4
ø 5
GFS/W2 GFS/W3 GFS/W4 GFS/W5 GFS/ W6 GFS/ W7
24
4.2 mm
5 mm
2 mm
5 mm
3 mm
5 mm
4 mm
5 mm
5 mm
5 mm
6 mm
5 mm
7 mm
2 mm
4.2 mm
3 mm
4.2 mm 4.2 mm 4.2 mm
4 mm 5 mm 7 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
ø 1.28
Length
Length
ø 4.2
MATERIAL Titanium Grade 5
Healing cap for standard platform (2.1 mm)
with two varios diameters – 4.2 mm and 5 mm.
It is installed using universal or hand
prosthetic insertion driver.
HEALINGCAPS
PRODUCT CODE
GFS2
GFS3
GFS4
GFS5
GFS7
STANDARD
2.1
INTERNAL HEX
HEALING CAPS
Standard platform
Bio3 Implants | Healing caps
Bio3IMPLANTS
PremiumDentalImplants
WIDE
ø 1.28
ø 4
ø 5
GFS/W2 GFS/ W3 GFS/ W4 GFS/W5 GFS/W6 GFS/W7
Cover-screw HC
suprastructures
IMPLANTS
PremiumDentalImplants
COVER SCREW HEALING CAPS
ø 3.20
ø 3.20
ø 2.08
4,505,50
10,50
GFNS
Ensures ideal gingival margin.
NEW
STANDART PLATFORM
WIDE PLATFORM
3.2 mm
10.5 mm
DIAMETER
LENGTH
suprastructures
PLANTS
PremiumDentalImplants
COVER SCREW HEALING C
10,50
NEW
STANDART PLATFORM
3.2 mm
10.5 mm
DIAMETER
LENGTH
31. Suprastructures: Healing caps (HC)
32
Standard diameter
Wide diameter Cover-screw HC
WIDE
PLATFORM
2.5 mm
26
suprastructures
Bio3IMPLANTS
PremiumDentalImplants
COVER SCREW HEALING CAPS
ø 3.20
ø 3.20
ø 2.08
4,505,50
10,50
GFNS
GFNB
ø 4.0
ø 4.0
ø 2.08
4,505,50
10,50
MATERIAL Titanium Grade 5
Ensures ideal gingival margin.
Suitable for any variants
of following dental prosthetics.
NEW
STANDART PLATFORM
WIDE PLATFORM
3.2 mm
4.0 mm
10.5 mm
10.5 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
suprastructures
Bio3IMPLANTS
PremiumDentalImplants
COVER SCREW HEALING C
10,50
GFNS
10,50
Ensures ideal gingival margin.
Suitable for any variants
of following dental prosthetics.
NEW
STANDART PLATFORM
WIDE PLATFORM
3.2 mm
4.0 mm
10.5 mm
10.5 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
33. Suprastructures: Digital dentistry
34
Applying CAD/CAM* technology:
fine adjustments to the prosthesis
design are captured digitally
a more accurate fit for restoration
reduced number of appointments ->
saving both the doctor’s and patient’s
time
* CAD (Computer-Aided Design)
CAM (Computer-Aided Manufacture)
Titanium platform
Scan-abutment
Premill abutment
52
su
Bio3 Implants | Premill abutment
Bio3IMPLANTS
PremiumDentalImplants
It pro
creat
with i
regar
inclin
Poss
resto
patie
P
PREMILL ABUTMENT –
ABSOLUTELY FREEFORM
PREPARED ABUTMENT
Prepared abutment has width 10 mm an
that makes it multifunctional
• This individual abutment is made using the
precision machine.
• As a result it is possible to create the supra
diameter, height, shape and angulation.
• Prepared (Premilled) abutment has conica
optimal implant-abutment tight fit connectio
End
of p
pros
36. Abutments: Screw-retained restoration
37
Standard platform Wide platform
36
suprastructures
SCREW RETAINED ABUTMENTS
Standard platform
2.1
INTERNAL HEX
PRODUCT CODE
VAAS1
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for screw retained abutment for screw retained abutment for screw
retained abutmen
for screw retained abutmentfor screw retained
abutment
Titanium sleeve for screw
retained abutment
Laboratory Analog Transfer
VAAS2
VAAS3
Bio3 Implants | Screw Retained Abutments
Length
4.7 mm4.7 mm4.7 mm
3 mm2 mm1 mm
DIAMETER
LENGTH
SCREW RETAINED ABUTMENTS
ø 4.7
ø 2.1
GAES2 Plastic VAASGAVAA
SSASSASSASSA
Screw is included*
* * * *
TGAS 1 IAES SAMS15
Bio3IMPLANTS
PremiumDentalImplants
Each abutment set inc
PROSTHETIC SCREW
The abutment is used to renew a single construction or a fixed bridge
with screw retention.
36
suprastructures
SCREW RETAINED ABUTMENTS
Standard platform
2.1
INTERNAL HEX
PRODUCT CODE
VAAS1
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for screw retained abutment for screw retained abutment for screw
retained abutment
for screw retained abutmentfor screw retained
abutment
Titanium sleeve for screw
retained abutment
Laboratory Analog Transfer
VAAS2
VAAS3
Bio3 Implants | Screw Retained Abutments
Length
4.7 mm4.7 mm4.7 mm
3 mm2 mm1 mm
DIAMETER
LENGTH
SCREW RETAINED ABUTMENTS
ø 4.7
ø 2.1
GAES2 Plastic VAASGAVAA
SSASSASSASSA
Screw is included*
* * * *
TGAS 1 IAES SAMS15
Bio3IMPLANTS
PremiumDentalImplants
Each abutment set includes:
PROSTHETIC SCREW
The abutment is used to renew a single construction or a fixed bridge
with screw retention.
Straight multi-units
37. Abutments: Screw-retained restoration (new)
38
Standard platform Wide platform
38
suprastructures
SCREW RETAINED ABUTMENTS
Standard platform
2.
INTERNAL
PRODUCT CODE
VAAS1+
VAAS2+
VAAS3+
Bio3 Implants | Screw Retained Abutments
Length
4.7 mm4.7 mm4.7 mm
3 mm2 mm1 mm
DIAMETER
LENGTH
ø 4.7
ø 2.1
Screw is included*
Bio3IMPLANTS
PremiumDentalImplants
GIMA Plastic TCMS TGMN 1GIMV IAEN
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for screw retained
abutment
for screw retained
abutment
for screw retained
abutment
for screw retained
abutment
for screw re
abutme
Titanium sleeve
for screw retained abutment
Laboratory Analog Transfe
SSASSASSASSA
* * * *
SOKM
NEW
PRODUCT
SALESSTART
FROM 2018
SCREW RETAINED ABUTMENTS
Each abutment
PROSTHETIC
The abutment is used to renew a single construction or a fixed bridge
with screw retention.
Straight multi-units
38
suprastructures
SCREW RETAINED ABUTMENTS
Standard platform
2.1
INTERNAL HEX
PRODUCT CODE
VAAS1+
VAAS2+
VAAS3+
Bio3 Implants | Screw Retained Abutments
Length
4.7 mm4.7 mm4.7 mm
3 mm2 mm1 mm
DIAMETER
LENGTH
ø 4.7
ø 2.1
Screw is included*
Bio3IMPLANTS
PremiumDentalImplants
GIMA Plastic TCMS TGMN 1GIMV IAEN
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for screw retained
abutment
for screw retained
abutment
for screw retained
abutment
for screw retained
abutment
for screw retained
abutment
Titanium sleeve
for screw retained abutment
Laboratory Analog Transfer
SSASSASSASSA
* * * *
SOKM15
NEW
PRODUCT
SALESSTART
FROM 2018
SCREW RETAINED ABUTMENTS
Each abutment set includes:
PROSTHETIC SCREW
The abutment is used to renew a single construction or a fixed bridge
with screw retention.
38. Abutments: Screw-retained restoration
39
Standard platform Wide platform
Angular multi-units 17°
40
suprastructures
ANGULATED MULTI-UNIT 17°
Standard platform
2.1
INTERNAL HEX
4.3 mm 4.3 mm 4.3 mm
2 mm1 mm 3 mm
Bio3 Implants | Multi-Unit Titanium Basis 17°
Bio3IMPLANTS
PremiumDentalImplants
GIMA Plastic TCMS TGMN 1GIMV IAEN
PRODUCT CODE
TBMS1701
TBMS1702
TBMS1703
17°17°17°
Angulated multi-unit 17°of a standard platform is intended for the
construction with screw retention during the treatment of partial
or full adentia. It is used in cases during which the implant is placed
at an angle. The set includes a bone screw. A multifunctional torque
wrench is used for the installation.
DIAMETER
LENGTH
ANGLE
ANGULATED MULTI-UNIT 17°
ø 4.3
Length
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for angulated multi-unit for angulated multi-unit for angulated
multi-unit
for angulated multi-unitfor angulated multi-unit
Titanium sleeve
for angulated multi-unit
Laboratory Analog Transfer
SSASSASSASSA
* * * *
SOKM15
ø 2.1
17°
PROSTHETIC SCREW
Each multi-unit basis set
includes:
40
suprastructures
ANGULATED MULTI-UNIT 17°
Standard platform
2.1
INTERNAL HEX
4.3 mm 4.3 mm 4.3 mm
2 mm1 mm 3 mm
Bio3 Implants | Multi-Unit Titanium Basis 17°
Bio3IMPLANTS
PremiumDentalImplants
GIMA Plastic TCMS TGMN 1GIMV IAEN
PRODUCT CODE
TBMS1701
TBMS1702
TBMS1703
17°17°17°
Angulated multi-unit 17°of a standard platform is intended for the
construction with screw retention during the treatment of partial
or full adentia. It is used in cases during which the implant is placed
at an angle. The set includes a bone screw. A multifunctional torque
wrench is used for the installation.
DIAMETER
LENGTH
ANGLE
ANGULATED MULTI-UNIT 17°
ø 4.3
Length
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for angulated multi-unit for angulated multi-unit for angulated
multi-unit
for angulated multi-unitfor angulated multi-unit
Titanium sleeve
for angulated multi-unit
Laboratory Analog Transfer
SSASSASSASSA
* * * *
SOKM15
ø 2.1
17°
PROSTHETIC SCREW
Each multi-unit basis set
includes:
39. Abutments: Screw-retained restoration
40
Standard platform Wide platform
Angular multi-units 30°
40
suprastructures
ANGULATED MULTI-UNIT 17°
Standard platform
2.1
INTERNAL HEX
4.3 mm 4.3 mm 4.3 mm
2 mm1 mm 3 mm
Bio3 Implants | Multi-Unit Titanium Basis 17°
Bio3IMPLANTS
PremiumDentalImplants
GIMA Plastic TCMS TGMN 1GIMV IAEN
PRODUCT CODE
TBMS1701
TBMS1702
TBMS1703
17°17°17°
Angulated multi-unit 17°of a standard platform is intended for the
construction with screw retention during the treatment of partial
or full adentia. It is used in cases during which the implant is placed
at an angle. The set includes a bone screw. A multifunctional torque
wrench is used for the installation.
DIAMETER
LENGTH
ANGLE
ANGULATED MULTI-UNIT 17°
ø 4.3
Length
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve
for angulated multi-unit for angulated multi-unit for angulated
multi-unit
for angulated multi-unitfor angulated multi-unit
Titanium sleeve
for angulated multi-unit
Laboratory Analog Transfer
SSASSASSASSA
* * * *
SOKM15
ø 2.1
17°
PROSTHETIC SCREW
Each multi-unit basis set
includes:
42
suprastructures
30°
Bio3 Implants | Multi-Unit Titanium Basis 30°
3 mm
30°
2 mm
30°
1 mm
30°
DIAMETER
LENGTH
ANGLE
Standard platform
2.1
INTERNAL HEX
PRODUCT CODE
ANGULATED MULTI-UNIT 30°
Bio3IMPLANTS
PremiumDentalImplants
TBMS3001
TBMS3002
TBMS3003
ANGULATED MULTI-UNIT 30°
4.3 mm 4.3 mm 4.3 mm
ø 4.3
Length
Healing Cap Burned-out plastic sleeve Temporary PEEK sleeve Laboratory Analog Transfer
SSASSASSASSA
* * * *
ø 2.1
GIMA Plastic TCMS TGMN 1GIMV IAEN SOKM15
for angulated multi-unit for angulated multi-unitfor angulated multi-unitfor angulated multi-unit
Titanium sleeve
for angulated multi-unit for angulated
multi-unit
Angulated multi-unit 30°of a standard platform is intended for the
construction with screw retention during the treatment of partial
or full adentia. It is used in cases during which the implant is placed
at an angle. The set includes a bone screw. A multifunctional torque
wrench is used for the installation.
PROSTHETIC SCREW
Each multi-unit basis set
includes:
43. Suprastructures: individual solutions
44
Burned-out abutment on titanium base
Burned-out abutmentWIDE
PLATFORM
2.5 mm
STANDARD
PLATFORM
2.1 mm
suprastructures
4.5 mm
4.5 mm
7.7 mm
7.7 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
MATERIAL
MATERIAL
Titanium Grade 5
Titanium Grade 5
Burned out plastic
Burned out plastic
TITANIUM BASIS WITH
A BURNED-OUT PLASTIC SLEEVE
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.1 mm).
Prosthetic screw in each set.
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.5 mm).
Prosthetic screw in each set.
STANDART PLATFORM
WIDE PLATFORM
TBKS1
TBKB1
2.1
2.5
ø 4.5
ø 4.5
ø 2.1
ø 2.5
7.7
7.7
Each basis set includes:
Each basis set includes:
PROSTHETIC SCREW
50
4.5 mm
7.7 mm
DIAMETER
LENGTH
MATERIAL
MATERIAL
Titanium Grade 5
Titanium Grade 5
Burned out plastic
Burned out plastic
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.1 mm).
Prosthetic screw in each set.
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.5 mm).
Prosthetic screw in each set.
Bio3 Implants | Titanium basis with a plastic cap
WIDE PLATFORM
TBKS1
TBKB1
Bio3IMPLANT
Pre
2.1
2.5
ø 4.5
ø 2.1
ø 2.5
7.7
7.7
Each basis set includes:
Each basis set includes:
PROSTHETIC SCREW
PROSTHETIC SCREW
suprastructures
4.5 mm
4.5 mm
7.7 mm
7.7 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
MATERIAL Titanium Grade 5
Burned out plastic
TITANIUM BASIS WITH
A BURNED-OUT PLASTIC SLEEVE
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.1 mm).
Prosthetic screw in each set.
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.5 mm).
STANDART PLATFORM
WIDE PLATFORM
TBKS1
Bio3IMPLANTS
PremiumDentalImplants
2.1
ø 4.5
ø 4.5
ø 2.1
7.7
Each basis set includes:
PROSTHETIC SCREW
50
4.5 mm
4.5 mm
7.7 mm
7.7 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
MATERIAL
MATERIAL
Titanium Grade 5
Titanium Grade 5
Burned out plastic
Burned out plastic
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.1 mm).
Prosthetic screw in each set.
Titanium abutment basis
with a plastic burned out
cap for standard platform (2.5 mm).
Prosthetic screw in each set.
Bio3 Implants | Titanium basis with a plastic cap
WIDE PLATFORM
TBKS1
TBKB1
Bio3IMPLANTS
PremiumDent
ø 2.1
ø 2.5
7.7
7.7
44. Abutments: Ball Attachments
45
Conditionally removable fixation
Standard and wide platform
WIDE
PLATFORM
2.5 mm
STANDARD
PLATFORM
2.1 mm
45. Abutments: Locator system
46
Conditionally removable fixation
Standard and wide platform
WIDE
PLATFORM
2.5 mm
STANDARD
PLATFORM
2.1 mm
ø 1.28
ø 2.1ø 3.85
Length
DIAMETER
LENGTH
LOCATORS
io3IMPLANTS
PremiumDentalImplants
suprastructures
MKL
WKL
SKL
FKL
Metal Cap
for locators
Soft Cap
for locators
Standard Cap
for locators
Hard Cap for
for locators
ø 1.28
ø 2.1ø 3.85
Length
LOCATORS
Standard platform
2.1
INTERNAL HEX
PRODUCT CODE
LS2
LS3
LS4
LS5
LS6
3.85 mm 3.85 mm3.85 mm3.85 mm 3.85 mm
5 mm 6 mm4 mm2 mm 3 mm
DIAMETER
LENGTH
LOCATORS
Locators for overdentures and removable dentures fixation for standard platform (2.1 mm)
as an element for dental prosthetics on two or more implants.It is installed using universal
or hand prosthetic insertion driver.
MATERIAL Titanium Grade 5
47. Bioline suprastructures: Healing caps
48
Incisor type
Canine type
Premolar type
Molar type
WIDE
PLATFORM
2.5 mm
STANDARD
PLATFORM
2.1 mm
48. Bioline suprastructures: Straight abutments
49
Incisor type
Canine type
Premolar type
Molar type
WIDE
PLATFORM
2.5 mm
STANDARD
PLATFORM
2.1 mm