1. 1
Name: _________________________________Date:____________Mark:_______
QUIZ 3. Hazard Recognition, Evaluation, and Control
Directions: Encircle the letter of the correct answer.
1. Which of the following is/are the source(s) of energy release?
a. Mechanical c. Hydraulic
b. Pneumatic d. All of the above
2. Only major on-the-job injuries or other incidents must be reported to the supervisor.
a. True c. Always
b. False d. Sometimes
3. US employers with_______ employees are required to maintain a log of significant work-
related injuries and illnesses using specific forms.
a. more than 15 c. more than 10
b. less than 10 d. less than 5
4. Occupational Safety and Health Administration (OSHA) refers to the Occupational Safety
and Health Act of ____.
a. 1970 c. 1950
b. 1960 d. 1940
5. It is powered by air pressure.
a. Respirator c. Hydraulic
b. Pneumatic d. Mechanical
6. It requires contractors to educate employees about hazardous chemicals on the job site and
how to work with them safely.
a. SDS c. OSHA
b. PPE d. HAZCOM
7. The activity that consists of breaking a job into its component tasks and then analyzing each
step for potential hazards is called a _____.
a. job safety analysis c. hazardous incident simulation
b. safety breakdown structure d. safety pre-assessment
8. A measure of the probability, consequences, and exposure related to an event is referred to
as _____.
a. safety c. evaluation
b. risk d. hazard
9. List down the four most important things to look for in a Safety Data Sheets (SDS)
____________________________ ________________________________
____________________________ ________________________________
2. 2
Name:________________________________________Date:___________ Mark:____
Quiz 1: Safety Culture, Incident and Accident
A. Write the three (3) rules in ensuring your safety at work.
1. ______________________________________________________________
2. ______________________________________________________________
3. ______________________________________________________________
B. Safety culture means _______________________________________________
C. Write three (3) benefits of strong safety culture
1. ______________________________________________________________
2. ______________________________________________________________
3. ______________________________________________________________
D. True or False?
______________1. Safety is a learned behavior and attitude.
______________2. Companies with strong safety cultures have the less turnover.
______________3. An incident happened when NO personal injury has occurred.
E. List down three (3) examples of MINOR injuries.
1. ____________________
2. ____________________
3. ____________________
F. List down the Big 4 causes of death in the construction work.
1. _____________________
2. _____________________
3. _____________________
4. _____________________
5. 5
NAME: _____________________________________GROUP: ______ DATE:______
Activity No. 4 Straight Ladders
1. Label the parts of the straight ladder shown below (3 marks).
3. Write down the one rule in positioning the foot of the the ladder.
_________________________________________________________________________
_________________________________________________________________________
2. Write the rule in using the ladder as shown in
the picture on the left (5 marks)
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
___________________________________
6. 6
4. True or false? (5 marks)
___________ 1. You can use METAL ladder around electrical lines.
___________ 2. If the height of the wall is 4 meters, the feet of the ladder should be 2m
away from the wall.
___________ 3. Aluminum ladders are heavy.
___________ 4. Fiberglass ladders are very durable.
___________ 5. You can carry heavy tools when climbing up a straight ladder.
5. Before using a straight ladder, what should be done? (2 marks)
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
6. Write down the required distances in meters for the ladder shown below. (3 marks)
___
5m
7. 7
ame: ___________________________________ Date: ____________ Mark:______N
Quiz No. _____
Caught-in and Caught-between Hazards
A. List down the 4 causes of caught-in and caught-between hazards.
1. _______________________________
2. _______________________________
3. _______________________________
4. _______________________________
B. List down the 4 names of soils you will see in your work.
1. _______________________________
2. _______________________________
3. _______________________________
4. _______________________________
5. In section 3.2.1, who will inspect the excavations daily?
_____________________________________________
C. Write down three (3) tolls that need a machine guard.
1._________________________ 2._____________________3.
____________________
D. Write down one (1) rule in the caring of tool and guard.
______________________________________________________________________
______________________________________________________________________
________
8. 8
E. YES or NO?
___________You will replace the guard 2 hours after maintenance.
9. 9
Name: ______________________________________ Date:_________________
A. True or False?
1. More than one ampere of electrical current can kill.
2. A distance of at least 10 feet (3m) must be maintained from any conductor
carrying 50,000 volts or less.
3. For electrical safety, you CAN use worn power cords.
_____4. You CAN use metal ladders near any source of electricity.
_____5. Inspect electrical power tools before you use them.
_____6. Always test a GFCI before use.
______7. When someone is shocked, you CAN pull him out from the source.
B. What are the 5 types of electrical incidents?
1. ___________________________________
2. ___________________________________
3. ___________________________________
4. ___________________________________
5. ___________________________________
C. Write the meaning of the following:
LOTO: _______________________________________________________________
GFCI: ________________________________________________________________
10. 10
Name: ______________________________________ Date:______________ Mark:________
Quiz No. ______
Personal Protective Equipment
A. Directions: Identify the following PPEs. Write your answer on the blank.
B. Select the correct answer.
1. Hard hats should be made of fiberglass or ______________________________________.
a. metal b. reinforced plastic
2. A good general rule about hearing protection is that it should be used if you must raise your
voice for someone to hear you when they are _____.
a. 2 feet (61 cm) away b. 3 feet (91 cm) away
3. When there is the potential to be exposed to asbestos, workers must _____.
a. report it to a supervisor and avoid disturbing it b. remove the asbestos as quickly
as possible
11. 11
Name: ______________________________________ Date:______________ Mark:________
Quiz No. ______
Job-Site Hazards
Directions: Identify the following GHS labels.
B. What will you do in case you experience the following at work?
Heat Stress
______________________________________________________________________
Frostbite
______________________________________________________________________
Hypothermia
1. 2. 3.
4. 5. 6.