1. CV
Ahmed Yassin Kamel Hewaidy
Control System and Instruments Engineer
Commissioning Engineer for I&C
E-mail: ahmed.yassin1024@gmail.com Mobile number: (+20) 1224407545 / (+20) 1114407545
Address: Damietta,Egypt
Work Experience:
Project: New Assiut Combined Cycle Add-On Project – GE 2X250 MW.
Employer: ORASCOM Construction
Position: Commissioning Engineer for I&C
From June 2016
EPC Project.
Responsibilities:
Doing the commissioning and the function test for the steam turbine.
Installation supervision and commissioning for the diverter dumper.
Testing and doing the commissioning for HRSG.
Testing and Commissioning for the air ceil condenser. ACC
Supervision on installation and commissioning for the SWAS system.
Testing and commissioning for all control systemand DCS.
Testing the communication for all operating stations, controllers and servers.
Testing and commissioning for Fire Fighting System.
Project: New Assuit Simple Cycle Project – GE Frame 9E 8X125 MW
Employer: ORASCOM Construction
Position: Commissioning Engineer for I&C
From April 2015 to June 2016
EPC Project.
Fast Track Project.
2. Responsibilities:
Full supporting for GE Frame 9E turbines during testing, calibration, commissioning and first
fire
Giving assistance for testing and commissioning for DCS, loop check for POP instruments, and
communication between DCS and GE turbines and GIS.
Commissioning and testing black start diesel generator 3MW and full function test.
Testing and commissioning for FOTP (Fuel Oil Treatment Plant).
Testing and commissioning for Hot Water Boiler.
Testing and commissioning for Fire Fighting System.
Training:
IN 2013 first training at Combined Power Station of East Damietta.
Graduation Project:
My graduation project is very important experience in working in a team and to be very close to the
embedded system environment and how to match the Software code with Hardware automation by
using C programming language.
The other part is a low current circuits and high current circuits to connect all the incubator devices.
Skills
Engineering skills:
Logic DesignAnalysis.
P&ID Analysis.
Controllers Configuration.
Hart Communicator calibration and commissioning.
Hot loop checking and cold loop checking.
Low current circuits connections.
Deal with PLC and Arduino.
Knowledge of C programming language.
Block diagram analysis.
Sensor applications.
Datasheet analysis.
Alarm implementation.
Embedded System Developing.
Computer skills:
AUTOCAD (professional) PLC (good)
C,C (good) Assembly (good)
CCNA (good) MATLAB (good)
3. COMMUNICATIONS SKILLS:
Full office management.
Strong interpersonal skills.
Ability to work under pressure.
Advanced persuasion skills.
Team working spirit and ability to learn more.
Creative, self-motivated, reliable and dynamic.
Excellent time management skills and good at meeting deadlines.
Well organized with ability to ordering priorities.
Other skills:
Economic analysis
Implementation of business plan
Marketing
Back office management
Personal Information:
Date of birth: June 1st 1990
Nationality: Egyptian
Military status: Exempt
Education:
UNIVERSITY DEGREE: Bachelor Degree of Computer Engineering and Control Systems.
UNIVERSITY: Mansoura.
FACULTY: Engineering.
DEPARTMENT: Computer Engineering and Control System.
YEAR: 2014
GRADE: Pass, Graduation Project degree (//Excellent//)
GRADUATION PROJECT: The Development of Baby Incubator Using New Technology
Objectives:
In Commissioning, it is always critical. Needa high level of knowledge and concentration.
Without the ability to work in a team and having good skill in organization, it would be very hard.
Everyday I`m trying to keepmoving earning more knowledge and that will never end.
I have a big goal that when it is time to stop, I become proud of what I did and not to regret to lose
things that more efforts to win wouldn’t have cost me a lot.
Language:
Arabic : Mother tongue.
English: Very Good.
Spanish: little knowledge
Interests
New Technology Tracking
Collecting Scientific Information
Football Coaching
