1. PERSONAL DETAILS
Mr Keaoleboga Budani
EDUCATION AND QUALIFICATIONS
University of Bradford 2010 – 2015
Electrical and Electronic Engineering (MEng) - First Class with Diploma in Industrial Placement
 My final year project was a design of a camera tracking RFID motion
sensor. This is a motion detection system that controls a camera to take
and send images of the detected object within the sensor range to the
computer, mobile device or external memory. The system was covering all aspects a user needed to
operate on security system of any kind.
 Relevant Modules:
o Advanced Embedded Systems Design & Applications; Advanced Numerical Methods; Design
Optimization; Interdisciplinary Competitive Design; Electronics Application Project; Engineering
Analysis; Financial Management; Engineering Computation; Power Convers and Applications;
Group Project Design; Risk Management.
University of Botswana 2008 – 2010
Bachelor of Science (General) – Average (GPA) = 4.3/5.0
 Relevant Modules:
o Communication and Study Skills, Computing & Information Skills, Calculus,
Introduction to Linear Algebra, Matlab, Structured Programming, Electricity &
Magnetism and Newtonian Mechanics.
TECHNICAL SKILLS AND ACHIEVEMENTS
Trained on SAFEMine programs (TL1, TL2 and SMTrack) under Hexagon Mining Supervision:
 Working with the SAFEMine QC250 CAS/Track Main
Unit using WiFi with remote display on the Collision
Avoidance System (CAS) in the vehicles/equipment
operating on surface mines.
 Doing the physical installation of CAS, Radar &
Camera system.
 SAFEmine CAS - Traffic Awareness & Collision Avoidance for all mine vehicles to reduce accidents by alerting
operators to imminent threats;
o Configuration/programming of the QC250 after installation of CAS to the respective equipment by
defining variables needing monitoring on installed equipment.
o Working with SyncStation for both configuration and firmware updates. Using the SyncStation to
check the functionality of the SAFEMine equipment on installed vehicles.
o Integration of the BoomGate system with that of CAS. This setup is to get CAS installed vehicles to
trigger the BoomGate to open for their access to restricted areas. Capability of configuring the
BoomGate to operate as a SyncStation for light vehicle.
o Working with Remote Display and Scope Screen to visualise and animate the data interpreted by the
connected QC250 SAFEMine unit.
o Monitoring the associated Vehicle Register used for CAS configuration. Creating the required vehicle
models with the respect to the mine equipment.
o Basic incident reporting and downloading of files from the equipment involved in an incident and
Address: P. O. Box 43, Ramokgwebana
E-mail: bdbudani@gmail.com
Mobile No.1: +267 75 369 961
Mobile No.2: +267 77 027 534
License No.: 36257
License Type: Class B

2. supplying the Office with data for critical analysis.
 TRACK - Tracking and reporting for the entire fleet: Live tracking & in-vehicle monitoring through a web
interface over WiFi. Customisation of sophisticated reporting of real-time alerts and events like speeding,
usage and others;
o Running WiFi strength and connectivity tests onsite using SAFEMine Tool, SMTool and reporting
directly to SAFEMine office for results interpretation and support.
o Monitoring the onsite SMTrack by uploading installed equipment and downloading the customized
reports.
 TrackingRadar - Detect and track unprotected objects, vehicles and ground personnel;
o Installation of these sensors and integrating them with SAFEmine CAS.
o Configuring the sensors with respect to their position on equipment and to site-specific requirements,
such as maximum detection range, speed, and critical zones.
 ShovelAssist - Helps avoid incidents between shovels and surrounding machines;
o De-clutters the cabin by integrating cameras, TrackingRadar, and CAS pertaining to safety.
o Elimination of blind spots.
o Generating full near-misses records to support investigation, improve operator training, and enhance
safety measures.
Working Arduino and Proteous software:
a) Teamwork – Can manage, lead & work with a team with minimum of 12 persons.
b) Communication – Acquired great communication skills both from the Industry and Universities attended.
c) Organisational – Effective in completing all scheduled work on time referencing a Gantt chart.
EMPLOYMENT AND WORK EXPERIENCE
Trysome Auto Electrical and Plant Hire (Pty) Ltd - RSA September 2015 – Current
Technical Supervisor (Collision Avoidance SAFEMine System Project) @ Debswana Jwaneng Mine
Below are my responsibilities:
 Manage SAFEmine – Installations and maintenance of equipment including
troubleshooting and fault finding.
 Sell and introduce new products on and to the mines.
 Full responsibility and accountability for stock control.
 Taking orders and delivering of stock to the mine timeously.
 Execute and manage the roll out of various projects on the mine monthly.
 Provide and maintain a working environment that is safe and without risk to the health of
employees within my area of responsibility.
 Manage Trysome vehicles on site and ensure inspections are done and that replacement vehicles are
timeously organized with TAE HO.
 Get invoices signed and delivered to the correct departments ensuring regular payment from the
site/mine.
 Site liaison point between Trysome Head Office, local subcontracted services and the site owner.
 Ensure that all technicians’ service reports, timesheets and fitment checklists are completed daily
and are signed off by the site/project engineer.
 Daily meetings with foreman’s and section engineers to discuss duties/ problems/ updates.
 Manage SAFEmine – Installations and maintenance of vehicles/equipment included in the contract
Scope of Work for the site.
o Circuitry design, printing and
implementation/building
o Troubleshooting
o Utilising the designs on control systems and
automation
 My Final Year Project was an application
design made using this software.

3. BCL Limited. August 2013 – August 2014
Botswana Power Corporation July – September 2012
Registrations
Botswana Engineering Registration Board September 2015 - Current
Holds both the registration and practice certificates (Registration No: 20151664)
Referees
 Its vision is to have an Ethical Engineering Practice
 Its mission is to protect the welfare and interest of the public by regulating
the activities and conduct of registered engineers as well as promoting the
highest standards of engineering practice.
 Its values are:
- Integrity & Excellence
- Innovation & Value Creation
- Transparency
Assistant Transmission Engineer Intern Student
 I was involved in electrical power substation monthly inspections, which
dealt with High and Low voltage circuit breaker functional tests.
 Part of the team that worked on isolator maintenance, transformer
functional, post fault tests, circuit and fault finding and post fault
investigations.
 Re-commissioning of transmission equipment after repairs.
Industrial Placement
 My duties included being assigned some projects (& assignments) that were
completed within defined deadlines and presenting their progress every
morning to supervisors.
 Leading an automation project (to reduce cost by minimising human
interference on the equipment used) {the project was titled “Automating the
Punch car for the Converter Tuyeres”}.
Dr Prashant Pillai
University of Bradford
Director of Postgraduate Research
E-mail: P.Pillai@bradford.ac.uk
Dr.H.S.Rajamani B.Eng. M.Eng. PhD (Cantab)
University of Bradford
Senior Lecturer (Power Electronics & Systems)
E-mail: H.S.Rajamani@bradford.ac.uk
Kennedy O. Baikalafhi
BCL Limited
Electrical Training Officer
E-mail: KBaikalafhi@BCL.BW
Michael Crocker
Trysome Auto Electrical & Plant Hire (Pty) Ltd
Head of Department (Trysome)
E-mail: Michael.Crocker@trysome.cc
 Working with applicable programs such as Freelance S7 (high level) for PLC, Distribution Control
System (DCS) and Supervisory Control and Data Acquisition (SCADA).
 Woking with field engineers and technicians on variety of instrumentation and control systems
circuitry employing but not limited to any equipment used in the field.
Themba Mazibuko
SAFEmine – Hexagon Mining
Support Engineer
E-mail: themba.mazibuko@safe-mine.com