Fats and oils are esters of glycerol with long-chain fatty acids. They are mainly stored as energy reserves in plant seeds and animal tissues. Key properties include hydrolysis, hydrogenation, and saponification. Hydrolysis breaks fats down into glycerol and fatty acids. Hydrogenation adds hydrogen to unsaturated oils to make them more saturated and solid. Saponification uses alkalis to convert fats into soap and glycerol. Rancidity occurs when oils oxidize and develop foul smells. Various analytical methods determine properties like iodine value and saponification value to identify and check purity of oils.
Premium Call Girls Cottonpet Whatsapp 7001035870 Independent Escort Service
Fats and oil 3rd sem b pharmacy
1. FAT AND OILS Pt L R college of pharmacy,
Faridabad.
2. FATS AND OILS
In nutrition, biology & chemistry, fat & oils usually means
any ester of fatty acids
3. WHAT ARE FATS AND OILS
These are triesters of glycerol with long-chain carboxylic acid ( 12 to
20 carbons )
Fats & oils are lipids which are saponifiable
But steroids are non-saponifiable
Plants store large quantities of fats in their seeds, roots & fruits eg.
Cotton seeds, castor beans, peanuts, coconuts & olives have high fat
content.
In animals, the fat deposits are to be found mostly under the skin &
around the intestine & kidneys
4.
5.
6. HYDROLYSIS
It is the breakdown of the fat or oils into its constituents like Tri-
hydric alcohol and fatty acids under the influence of superheated
steam or reaction with acids or alkalies
When fats or oils are boiled with sodium or potassium hydroxide sol”
the products are sodium or potassium salts of fatty acids i.e. soaps &
glycerol
7. HYDROGENATION
hydrogenation or hardening of oils (PHO) is a
chemical modification by adding hydrogen to
(poly)unsaturated fatty acids in the triglycerides
under high temperature and pressure in the
presence of a metal catalyst, such as nickel results
in the formation of saturated glycerides which are solid fats at room
temperature.
Hydrogenation converts liquid vegetable oils into solid or semi-solid fats
Partial hydrogenation of vegetable oils is used to make vegetable ghee
(DALDA)
8. SAPONIFICATION
Alkaline hydrolysis is called saponification
Saponification is a process that involves conversion of fat, oil
or lipid into soap and alcohol by the action of heat in the presence of
aqueous alkali (e.g. NaOH/KOH). Soaps are salts of fatty acids and
fatty acids are monocarboxylic acids that have long carbon chains (at
least 10) e.g. sodium palmitate
9. Depending on the nature of the alkali used in their production, soaps
have distinct properties. Sodium hydroxide (NaOH) gives "hard soap";
hard soaps can also be used in water containing Mg, Cl, and Ca salts.
Potassium soaps(KOH) are soft soap. Soap that is liquid or easily
soluble, usually made by saponification with potassium instead of the
more typical sodium hydroxide. has a lower melting point.
10. RANCIDITY OF OILS
When oil or fats are left exposed to moist air. oil or fats develop foul-
smell & sour taste now they have become RANCID. It is caused by 2
types of reactions :
Oxidative rancidification :- involves the oxidation of C=C bonds in
fats & oils to produce volatile carboxylic acids.
Hydrolytic rancidification :- involves the hydrolysis of 1 or more ester
linkages in fats & oils to produces the original acids.
Antioxidants are added to many edible fats or oils products to retard
rancidification.
11. Causes of rancidity
-Fats and oils get rancid on
ageing
Various factors aggravates rancidity of oils & fats
-Light
-Air ( oxygen )
-Moisture
-Microbes
12. DRYING OF OILS
When highly unsaturated oils are exposed to air. they undergo
oxidation & polymerization to form a thin waterproof film. Such oils
are called drying oils & the reaction is called drying
Drying oils
Have very high iodine number, usually above 120 because they
contain large proportion of unsaturated fatty acids eg. Linseed oil,
fish oils & cod liver oil.
Semi drying oils
Have intermediate iodine value 100-120. eg. Cotton seed & sesame
oil.
Non drying oils
Have relatively low iodine value, below 100. eg. Olive oil & almond oil.
13. ANALYTICAL CONSTANT
Many useful analytical methods and analytical constants have been
devised to have quality control over fats and oils used as raw
material for the manufacture of soaps, drying oils & other products
Iodine number & saponification Value Serves as a means of detecting
adulteration and it also indicates the nature of the adulteration.
14. ACID VALUE
It is defined as the number of milligrams of KOH required to
neutralize the free acids present in 1gm sample of fat or oil.
Generally, rancidity causes free fatty acids liberation, hence acid value
is used as an indication of rancid state.
Higher acid number mean it stored for longer
duration…….
High acid value indicates the
deterioration of oil, which
affects its nutritive value
15. Normally, refined oils should be
free from any free fatty acids.
Because oils on decomposition
due to chemical or bacterial
contamination yield free fatty
acids
Therefore, oils with increased acid
number are unsafe for human
consumption
16. MATERIALS
0.1N Oxalic acid, Potassium
hydroxide (KOH) solution,
Phenolphthalein indicator, Fat
solvent, Fat sample
PROCEDURE (A)Standardize normality of potassium hydroxide solution, KOH
(1) 10ml of 0.1N oxalic acid is poured into conical flask. 2-3 drops of
phenolphthalein indicator is added to the solution. (2) The solution is
titrated with KOH solution till a permanent pink colour appears. The volume
of KOH solution used is recorded . Using the volume of KOH solution is
used, the concentration of KOH is calculated by using the formula
S1V1=S2V2.RESULTS AND
CALCULATIONS
(A)Standardize
normality of
potassium hydroxide
solution
No of
observa
tion
Initial
reading
(ml)
Final
reading
(ml)
Average
reading
(ml)
1 0.00 17.00
17.00
2 0.00 16.90
3 0.00 17.10V1S1=V2S2
where
V1= Volume of oxalic acid used
S1= Normality of oxalic acid,
V2= Volume of KOH used
S2= Normality of KOH
S2= 𝑉1 𝑆1/ 𝑉2
=(10.00ml)(0.1N) /(17.00ml)
= 0.05882N
Therefore, normality of KOH is
17. (B)Determination of acid value of fats and oils (1) 5g of fat sample is
weighed and placed in a conical flask. Then, 25ml of fat solvent is
added to the conical flask and shake it well. Few drops of
phenolphthalein is added to the solution also. (2) The above solution
is titrated with 0.1N KOH until a faint pink colour persists for 20- 30
seconds. The volume used is recorded. (3) Step 1 and 2 above is
repeated with a blank sample which does not contain any fat sample.
Determination of acid value of fats and oils
Table of volume of KOH used in titration(with fat sample)No of
observati
on
Fat
sample
used (gm)
Vol of fat
solvent
(ml)
Initial
reading
(ml)
Final
reading
(ml)
Average
reading
(ml)
1. 4.995 25 0.00 0.50 0.50
2. 4.995 25 0.00 0.50
Table of volume of KOH used in titration( without fat sample)
No of
observation
Volume of
fat solvent
(ml)
Initial
reading (ml)
Final
reading (ml)
Average
reading (ml)
1. 25 0.00 0.10
0.10
2. 25 0.00 0.10
18. Acid value (mg KOH/g fat) = Titre value x Normality of KOH x 56.1/ Weight of
sample (g)
1ml of 0.1N KOH contains 56.1mg of KOH. Hence a factor of 56.1 is
incorporated in the numerator in the above equation to obtain weight of KOH
from the volume of 0.1N KOH solution used during this titration.
Hence, 0.05882 N KOH contains 56.1mg x 0.05882N/ 0.1N = 32.998mg
Acid value (mg KOH/ g fat) = (0.40ml) × (0.05882N) × (32.998mg) /(4.995g)
= 0.1554 mg KOH/ g fat
Therefore, Acid value of the fat sample after calculated is 0.155 mg KOH/ g
0.1N KOH solution used for blank sample (Blank) =
0.10ml
0.1N KOH solution used for sample (With fat sample)
= 0.50ml
Titre value for sample = 0.50ml – 0.10ml = 0.40ml
Therefore, titre value of sample is 0.40ml.
19. SAPONIFICATION VALUE
It tells us the approximate molecular weight of fat or oil
Saponification number as the number of milligrams of KOH required
to saponify one gram of a fat or oil under the specified conditions.
In the saponification reaction, one mole of a fat reacts with 3 moles
of KOH because sample of oil or fats have 3 ester groups. If M is the
molecular weight of fat, M gm of fat require 3*56=168 gm or
168000mg of KOH for saponification.
Saponification no of fat = 168000/M
By knowing the saponification number we can determine the value of
M.
Saponification number of fat is inversely proportional to the
molecular weight (M)
20. Oil Saponification
value
Coconut oil 242-263
Corn oil 187-196
Cottonseed 190-207
Indian mustard 171
linseed 180-196
olive 187-197
Peanut 184-196
Oil Saponification
value
Safflower 186–203
Sesame 188–193
Soybean 189–195
Sunflower 186–194
Mustard 170–178
Rapeseed 166–198
Jatropha 188–198
Saponification number is characteristic of a particular
fat or oil & serves for its identification
21. The saponification value of oil and biodiesel were estimated by the titration
method. The fat sample of 1 g was taken in the beaker and dissolved in 10 mL of
ethanol solvent. Further, 25 mL of ethanolic 0.5 normality of KOH was
quantitatively transferred to the fat-solvent mixture and named as a test sample.
The same procedure was followed to prepare the blank sample without the fat
sample.
Then, both the samples were attached to the reflux condenser and heated up to
the boiling point of the water for about 30 min. After that, the samples were
allowed to attain room temperature. Finally, 2–3 drops of phenolphthalein
indicator were added to samples and titrated against 0.5 normality of
hydrochloric acid.
The saponification was estimated using the following equation.
Saponification value = MW×N×(VBlank−Vtest)
Ws
where MW, Molecular weight of KOH, g/mol;
VBlank, volume of HCl for Blank sample, mL;
VTest, volume of HCl for the Test sample, mL;
N, normality of KOH, mol/mL;
WS, weight of sample, g.
22. ESTER VALUE
The ester value is the number of mg of potassium hydroxide
required to saponify the esters in 1.0 g of the substance.
The ester value shows the amount alkali consumed in the
saponification of the esters & is possible identify and differentiate
the waxes with this value; for example beeswax ester value is 72 to
79 mg KOH/ g, candelilla wax ester value is 31 to 43 mg KOH/g
and carnauba wax ester value is 74 to 78 mg KOH/g.
In ester value determination, the sample is hydrolyzed to alcohol
and using excess of standard potassium hydroxide solution. The
excess of alkali is back titrated. USP-NF monographs presents a
general procedure of ester value apply to fats, fixed oils and waxes.Ester
group
23. Ester value = Saponification value - Acid value
Place 1.5 g to 2 g of the substance in a tared, 250 mL flasks, add 20 mL to 30 mL of
neutralized alcohol and shake. Add 1 mL of phenolphthalein, and titrate with 0.5 N
alcoholic potassium hydroxide until the free acid is neutralized. Add 25.0 mL of
0.5N alcoholic potassium hydroxide. Heat the flask on a steam bath, under a
suitable condenser to maintain reflux for 30 minutes, frequently rotating the
contents titrate the excess potassium hydroxide with 0.5 N hydrochloric acid.
Perform a blank determination under the same conditions. Calculate the ester value
by the formula:
BHCl: is the volume in mL, of the hydrochloric acid consumed by the blank
VHCl: is the volume in mL, of the hydrochloric acid consumed by the actual test
W: is the weight, in g, of the sample taken
Significance:
24. IODINE ADSORPTION VALUE
(IODINE NUMBER)(IODINE INDEX)
The degree of unsaturation of fat or oil is measured by its iodine
number
It is the number of grams of iodine that would add to C=C present in
100 grams of fat or oil.
Susceptibility to rancidity increases for the oil or fat having higher
iodine values.
Significance :
1. Iodine number : directly proportional to degree /content of
unsaturated fatty acids .
2. Lower the iodine number ,less is the degree of unsaturation
3. Iodine number is useful to analyze the degree of adulteration
25. Table of iodine value
coconut oil is very saturated so it is good for making soaps
linseed oil is highly unsaturated, which makes it a drying oil, well
suited for making oil paints
Fat and oils Iodine value
Coca butter 35-40
Coconut oil 7-10
Sunflower oil 118-144
Soybean oil 120-136
Rice bran oil 95-108
Linseed oil 136-178
Caster oil 82-90
Iodine number
directly proportional
to content of
unsaturated fatty
acids.
26. MRTHODS TO DETERMINE IODINE
VALUE
1. Huebl's iodine
2. Wijs iodine value after
3. Iodine by H. P. Kaufmann
Iodine gets attached on
double /triple bonds
present in oil & fat
molecule
27. WIJS IODINE VALUE AFTER
PROCEDURE Weigh accurately 0.22-0.25 g of dry corn oil into a 250 mL
Erlenmeyer flask,add 20 mL of carbon tetrachloride.
Add 20 mL of carbon tetrachloride to each of two additional flasks to serve as
blanks. Pipet 25.0 mL of Wijs reagent into each flask.
Stopper flasks, mix contents by swirling and store in a dark place at 25 ± 5 °C.
At the end of 30 mins., add 10 mL of 30% potassium iodide solution and 100 mL
of purified water to the sample solution.
Titrate immediately with standard 0.1 N thiosulfate solution until the yellow
color almost disappears. Add 1 mL of starch indicator solution and titrate
dropwise with vigorous swirling to disappearance of the blue starch-iodine
color.
Titrate the blanks in the same manner. If the sample titer is not between 50 and
60% of the average blank titer, adjust sample size accordingly and repeat the
determination.
Iodine Number = (Blank Titer - Sample Titer, mL)(0.01269)(100)
Sample Wt., g
28. ACETYL VALUE
The number of free hydroxyl groups in a fat or oil ( lipids )
it is determined by the milligrams of Potassium hydroxide require to
neutralize the acetic acid produced when 1gram of Fat or Oil is
acetylated with Acetic anhydride.
It is used to determine the natural properties, adulteration & rancidity
of oils & fat.
most of the oils and fats have low acetyl value (3 -15).
Increased acetyl value indicates more amount of free fatty acid.
29. Procedure: 1. Weigh accurately 0.5 to 3.0 g of sample in the flask. (The
following weights serve as a rough guide for different types of materials:
fatty alcohols 0.5 to 0.7 g, castor oil about one gram and ordinary oils 2 to 3
g) . , From a 10 ml burette add, 5 ml of the acetylating agent dropwise into
the flask . ,. Before attaching the condenser, moisten the neck of the flask
with pyridine to act as a seal, and make sure that the seal is maintained
during the acetylation.
2. Mix the sample and the acetylating agent by shaking well, add one or two
small pieces of pumice, and boil the contents of the flask gently for 60
minutes, maintaining the boiling so that the vapour rises no higher than the
bottom end of the condenser to maintain the pyridine seal .
3. Cool the flask to about 500C and with a rotary motion to assist in washing
the condenser tube, add 5ml of distilled water from the top of the
condenser. Shake the mixture well, and then boil it gently for 5 to 10
minutes.
4. After cooling the flask and the contents to room temperature and before
detaching the condenser, wash the condenser with 30 ml of butyl alcohol.
Detach the condenser and wash the neck and mouth of the flask and the tip
of the condenser with a further 20ml of butyl alcohol and then, if the
contents of the flask are not homogeneous, add butyl alcohol until they
become homogeneous. Titrate the free acetic acid with carbonate-free 0.35N
potassium hydroxide solution in the presence of a few drops of
phenolphthalein indicator.
30. REICHERT-MEISSL VALUE
It is defined as number of milli litres N/10 KOH solution required to
neutralize the volatile water soluble fatty acids obtained by 5 g fat.
This value is a measure of volatile water soluble acid contents the fat.
Principle:
- Fat is saponified using glycerol-alkali solution & acidified by sulphuric acid
to liberate free fatty acids.
- the liberated fatty acids are steam distilled and the steam volatile fatty
acids are collected (as condensate). The cooled condensate of the volatile
fatty acids is filtered for separation of water soluble and water insoluble fatty
acids.
- The water soluble fatty acids is titrated with alkali (KOH) to give Reichert
meissl value,
- water - insoluble fatty acids is titrated to give the polenske value. 2
31. significance
Higher content of Volatile fatty acids of butter (Butyric acid ,Caproic
acid &Caprylic acid) responsible for its higher Reichert –Meissl
number
It is useful in testing purity/adulteration of butter.
It is a measure of water soluble steam volatile fatty acids chiefly
butyric and caproic acids present in oil or fat.
No other fat contains butyric acid glycerides, and therefore, the
Reichert Meissl value of the butter fat is higher than that for any
other fat.
These determinations have been used principally for analysis of
butter and margarines.