CENTRAL PHILIPS

1. Connected To: IS3090 - 1-23
+++ 0200-5555-0810-0001 0000-01-08 +1+ 21:41+ #0060 VDU010 >
<digrpa:;
PROP GROUP DISPL SUPERV PARK EXT-PR MEMBER SW-ALL RNK LP PP
5 2999 0 - No 000000100 2502-95 1 0 No No
2702-95 1 1 No No
2704-95 1 2 No No
EXECUTED
<ergrpa:2999;
EXECUTED
<crgrpa:?
Create group arrangement
CRGRPA: <GROUP-DNR>,<GROUP-PROPS>[,[<GROUP-DISPLAY>][,[<SUPERVISOR-BSP-ID>]
[,[<PARK-POS>][,<EXT-PROPS>]]]];
When GROUP-PROPS indicates the group is an ACD group then the command will
ask for the ACD data items one by one.
In case the group is not an ACD group or when all ACD data items are given, the
command will ask for the member data :
<MEMBER-BSP-ID>,[<SWITCH-ALL/INIT-STATUS>],<RANK>[,[<LINE-POS>][,<PARK-POS>]];
The command can then be stopped by typing ';'. When the GROUP-PROPS do not
indicate an ACD group, the group arrangement will only be created when at least
one member is entered.
If the group is an observation group, all optional parameters must be empty.
If the group is a routing group then GROUP-DISPLAY, SUPERVISOR-BSP-ID and
PARK-POS must be empty.
If SWITCH-ALL/INIT-STATUS is omitted, default 0 (no switch allowance and initial
member status logged in and present) will be used.
The line or park positions are only allowed when GROUP-PROPS do not indicate
an ACD group.
<crgrpa:2999,5,?
GROUP-DISPLAY: Flash button on all member extensions (0 = No, 1 = Yes)
<crgrpa:2999,5,1,,1;
Enter <MEMBER-BSP-ID>,[<SWITCH-ALL/INIT-STATUS>],<RANK>
[,[<LINE-POS>][,<PARK-POS>]]: 2702,1,0,,1;
Enter <MEMBER-BSP-ID>,[<SWITCH-ALL/INIT-STATUS>],<RANK>
[,[<LINE-POS>][,<PARK-POS>]]: 2704,1,1,,1;
Enter <MEMBER-BSP-ID>,[<SWITCH-ALL/INIT-STATUS>],<RANK>
[,[<LINE-POS>][,<PARK-POS>]]: ;
EXECUTED
<digrpa:;
PROP GROUP DISPL SUPERV PARK EXT-PR MEMBER SW-ALL RNK LP PP
5 2999 1 - Yes 000000000 2702-95 1 0 No Yes
2704-95 1 1 No Yes
EXECUTED
<chfkda:?
Change function key data
CHFKDA: <MENU>sr,<KEY>sr,<KEY-LEVEL>sr[,[<KEY-DATA>],<PRIO-CODE>
[,<FUNCTION-CODE/LED-CODE>]];
enter soft-ring indication: [<SOFT-RING>];
Series or range for KEY and KEY-LEVEL only allowed , when KEY-DATA, PRIO-CODE,
FUNCTION-CODE/LED-CODE are omitted.
If KEY-DATA, PRIO-CODE and FUNCTION-CODE/LED-CODE are omitted then KEY and
KEY-LEVEL is deleted from MENU.
If FUNCTION-CODE/LED-CODE is omitted "extension-led-off" will be assigned.
Depending on the value of the LED-CODE or the contents of KEY-DATA the
command requests for the SOFT-RING indication. If SOFT-RING is omitted
no soft-ring is assigned to the function key.

2. <chfkda:?
MENU: Menu number (0..65533)
<chfkda:0,11,?
KEY-LEVEL: Function key level (0..1)
<chfkda:0,11,0,+1,?
PRIO-CODE: (over) Write priority code (1 or 3)
1 = User can reprogram the key 3 = User cannot reprogram the key
<chfkda:0,11,0,+1,3;
Enter soft-ring indication : ?
SOFT-RING: Soft-ring indication (0..3) :
0 = no soft-ring indication
1 = one soft-ring beep is given
2 = two soft-ring beeps are given
3 = three soft-ring beeps are given
Not all SOPHO Business telephones will support given a number of soft-ring
beeps; in that case only a distinction can be made between whether soft-ring is
given (1..3) or not (0).
Enter soft-ring indication : 2;
EXECUTED
<chfkda:0,10,0,+2,3
Enter soft-ring indication : 2;
EXECUTED
<chfkda:0,9,0,++1,3
Enter soft-ring indication : 1;
EXECUTED
<chfkda:0,8,0,++2,3
Enter soft-ring indication : 1
EXECUTED
<chfkda:0,7,0,++3,3
Enter soft-ring indication : 1;
EXECUTED
<chfkda:0,6,0,++4,3
Enter soft-ring indication : 1
EXECUTED
<difkda:0;
MENU KEY KEY-LEVEL -----KEY-DATA----- PRIO-CODE FUNCCODE SOFT-RING
0 6 0 ++4 3 - 1
0 7 0 ++3 3 - 1
0 8 0 ++2 3 - 1
0 9 0 ++1 3 - 1
0 10 0 +2 3 - 2
0 11 0 +1 3 - 2
EXECUTED
<dinars:0;
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
0 10 Internal number 2 D -
0 100 Activate fixed follow me 535 - -
0 10 Internal number 600 D -
0 57 Cancel automatic ring back 634 - -
0 28 Prepare FM from primary 64 - -
0 98 Activate diversion on busy 658 - -
0 99 Cancel diversion on busy 659 - -
0 27 Activate FM from primary 74 - -
0 29 Activate FM from destination 75 - -

3. 0 32 Cancel FM from primary 84 - -
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
0 30 Cancel FM from destination sel. 85 - -
0 31 Cancel FM from destination coll. 86 - -
0 11 Operator M code dialled general 9 - -
0 33 Pick up general *62 - -
0 35 Switch out of group by member *72 - -
0 36 Switch in group by member *82 - -
0 34 Pick up individual *88 - -
0 21 Trunk access code #8 D 8
0 103 General cancel code ### - -
EXECUTED
<difkda:0,49,0,*88,3;
Error 206: Too many parameters
REJECTED
<chfkda:0,49,0,*88,3;
EXECUTED
<difkda:0
MENU KEY KEY-LEVEL -----KEY-DATA----- PRIO-CODE FUNCCODE SOFT-RING
0 6 0 ++4 3 - 1
0 7 0 ++3 3 - 1
0 8 0 ++2 3 - 1
0 9 0 ++1 3 - 1
0 10 0 +2 3 - 2
0 11 0 +1 3 - 2
0 49 0 *88 3 - -
EXECUTED
<dinars:0,10;
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
0 10 Internal number 2 D -
0 10 Internal number 600 D -
EXECUTED
<didial:;
DIAL-TYPE ANALYSIS GROUP ANALYSIS TREE ROUTE
0: Extension dialling 000 000 -
1: Enquiry dialling 000 000 -
2: Operator dialling - 000 -
3: Post dialling - 003 -
4: Alternative destination dialling - 005 -
5: FM primary dialling - 005 -
6: Pick up destination dialling - 005 -
7: Executive secretary dialling - 007 -
EXECUTED
<dinars:5;
DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server,
U=Unit
DESTINATION
TREE CODE ANALYSIS RESULT NUMBER ID NUMBER
5 10 Internal number 2 D -
5 21 Trunk access code *8 D 8
EXECUTED
<chmdnr:?
Change menu number of a DNR/BSP

4. CHMDNR: <BSP-ID>sr[,<MENU>];
If MENU is omitted the relation is deleted.
<chmdnr:2702&2704,0;
EXECUTED
<dimdnr:?
Display menu number of a DNR/BSP
DIMDNR: <BSP-ID>sr;
<dimdnr:2702;
DNR-BSPT MENU
2702-95 0
EXECUTED
<didnrm:0;
MENU DNR-BSPT
0 2702-95
0 2704-95
EXECUTED
<downld:?
Request download for DNR/BSP
DOWNLD: [<BSP-ID>sr][,<ALL-SIP>[,<UNIT>]];
It is not allowed to give in the BSP-ID the all-BSPT (99) as BSPT part.
To download a (range/series) of (SIP/TMP) terminals: DOWNLD:<BSP-ID>sr;
To download all SIP terminals : DOWNLD:,1[,<UNIT>];
<downld:2702&2704,?
ALL-SIP: 1 = Send a reboot request to all sip terminals.
Other values are not allowed.
<downld:2702&2704;
EXECUTED