Here at SEA-SHIELD® we strive to provide products that meet and/or exceed the needs and expectations of crew. SEA-SHIELD® was developed by yacht crew for yacht crew. We know the demands and routines of the crew from the unpredictable nature of yachting itineraries to the never ending maintenance of the yacht exterior, tenders and toys. There is enough to do on a yacht besides having to polish the stainless every two weeks or polish the hull to remove exhaust every time the boat is used or apply wax every month (which never happens, since there is never enough time to do that in the first place). Crew need products that work fast, provide noticeable results, are easy to use and ultimately save time on maintenance so that they can focus on the more important parts of the job such as service to the owner and guests, operating the vessel and training.
3. Our Mission:
Sea-Shield is committed to restoring, treating and protecting yachts and
marine vessels in an economical fashion against the harsh saltwater
environment through Sea-Shield’s broad range of products and
services. Sea-Shield’s highly educated and professional staff handles
each restoration on every vessel entrusted to us with the utmost care
and precision. Committed to excellence, customer satisfaction is our
top priority.
Our Philosphy:
Sea-Shield has taken the esteemed Wax On, Wax Off theory to new
heights of excellence by decreasing its processing time and necessity.
Through extensive testing and product research, we are visionaries in
providing the best quality and most cost-effective products on the
market. Yacht captains and owners alike understand the importance of
exterior maintenance and known that its neglect will always show.
Because of our proprietary restoration processes Nano Coatings are
created to form an invisible, glossy, sacrificial shield to protect against
the sun and sea’s daily wear and tear, thus leaving the owner or crew
best equipped to maintain the yacht once protected by Sea Shield.
1
4. Sea-Shield Products are now boosted with special Nanotechnology
formulation that makes polymers last longer than any other product on the
market. Polycharger acts like a special diesel additive thats put in the fuel tank
of race boats to provide better engine performance. Polycharger improves the
performance of sealers.
Why do Sea-Shield Products use Polycharger?
Your sealer needs Polycharger because your boats gelcoat or paint needs
better protection to withstand the elements. Better protection translates to less
maintenance and longer lasting paint.
How Does Polycharger work?
All modern boat waxes and sealers use polymer technology for better shine and
protection. Even so-called pure Carnauba waxes contain polymers.
Unfortunately, the polymers used in consumer boat waxes and sealers never
get to do their full job. That’s because most of them fail in the transition from a
liquid to a dry film.
1. Before POLYCHARGER 2. After POLYCHARGER
1. Polymers are long molecules capable of interlinking to form a mesh of
molecule strands. This interlocking capability, called cross-linking, is what gives
polymers their terrific strength. Unfortunately, most boat waxes and sealers fail
to cross-link when applied to the surface of your boat. We have the secret!
2. Polycharger is a polymer booster and accelerant in one. The booster
component adds two new space-age polymers designed for high temperature,
high corrosive environments. When introduced to oxygen, the Polycharger
accelerant hyper-activates polymers in their liquid state, forcing cross-linking to
begin immediately.
2 1
12. Nano Coating
INSTRUCTIONS
Sea-Shield ®Nano Coating is the longest lasting protection you can apply to your yacht or boat on
a variety of surfaces including but not limited to paint, stainless steel, vinyl cushions, rubber, gel coat
and acrylic surfaces. This product takes minutes to apply to a clean and dry surface. Simply wipe on
and buff out the excess.
DESCRIPTION
Apply to a clean dry surface only. For best results apply to a properly prepared surface. This
product is designed for hand application only using a microfiber sponge applicator. Mist the
applicator (not the surface) with a single spray of Nano Coating . One spray is enough sealant to
cover a surface area of 3 to 5 square feet. Apply a very thin coat to the entire surface rub in
thoroughly until only a light film remains then wipe off all excess. Allow to dry 12 to 24 hours before
getting wet. For additional protection apply Sea Shield Polymer Sealer after the Nano Coating is fully
cured.
Metals
10 13