Processing-BSL

SCOURING

Scouring is the process of removal of natural oil substances like waxes, fats and
pectin's as well as added impurities like lubricating oil, dust, dirt and residual starch
in the cotton materials .
Machinery In Use:

SCOURING

PACIFIC JUMBO DOLLY WEIGHT RELAX
JIGGER ROTOMAR SCOURING
JIGGER JIGGER M/C REDUCTION
M/C M/C RANGE
M/C M/C M/C

Sunday, October 23, 2011 TEXTILE INTERNSHIP- DILIP SINGH, KUMAR SARVESH, PRASHANT
GAURAV & RAJEEV SHARAN/ DFT-05/ NIFT BANGALORE

Pacific jigger machine
Pacific jigger machine
 Model: Pacific Jigger machine
 Manufacturer: Harish industries limited
Technical specification:
1. Operating temperature – 50 ͦ C to 100 ͦ C ( depends on the material being used )
2. 1000 – 1200 meters of fabric can be loaded at once.
3. Time required – 5 to 6 hours
4. Steam pipes are located at both top and bottom of the chamber.
No. of machines – 2


Jigger
Jigger
 Manufacture: Bennigner – Manekar
2. 400 – 500 meters of fabric can be loaded at once.
3. Time required – 4 to 5 hours
4. Steam pipes are located at both top and bottom of the chamber.
No. of machines – 16


Jumbo Jigger
Jumbo Jigger
 Manufacturer: Bennigner – Manekar

1. They are the high capacity jigger machine and works on the same principle.
3. 1200 – 1400 meters of fabric can be loaded once in the chamber.
4. Time required: 6 hours
No. of machines: 3


Relax Scouring Range
Relax Scouring Machine:

 Manufacturer: Dhall Enterprises and Engineers Pvt. Ltd.
Parts of the range:
• Fabric feeding system, • Pleater,
• Guide rollers, • Storage chamber,
• Caustic soda tank, • Intermediate mangles,
• Soap tank, • Hot wash chamber
• squeeze rollers, • Acid wash chamber, &
• Expander rollers, • Take off system
• Steam chambers- 2 continuous, separate chambers (drums within it),


Relax Scouring Range
Technical Specifications:
Fabric width: 800 - 3000 MM In graduations of + 200 MM
Roller faced width: Fabric width + 200 MM
Guide rollers Dia: 125/150 Dia
Squeeze rollers: Dia 254 MM
Expander rollers: Bow type Sleeve Expanders 100, 125 MM Dia or Scroll Rollers
driven in counter direction.
Intermediate mangles: 0-3 tonnes
Final mangles: T or 10 Tonnes NIP pressure


Beam dyeing machine
Beam dyeing machine
 Manufacturer – Dalal Engineering works

•PH to be maintained – 4 to 5
•Temperature to be maintained – 130 – 135 ͦ c
•Time taken for one lot – 4 hours
•The machine is started at 60 ͦ c and is allowed to work for half and hour, the
temperature is increased by certain amount to certain limit at regular interval of time.


Jet dyeing machine
Machinery in use:
 Manufacturer – hegatex industries limited

•PH of the jet dyeing machine – 4 to 5
•Speed of fabric – 250 to 400 meters per minute.
•Length of fabric that can be fed at once – 550 to 600 metres
•Temperature – 130 ͦ c to 137 ͦ c
•Time taken to complete the process: 90 minutes to 2 hours


Heat Setting
•A thermal process taking place mostly in either a steam atmosphere or a dry
heat environment.
•The process gives fabric dimensional stability
•other desirable attributes like higher volume, wrinkle resistance or temperature
resistance.
•used to improve attributes for subsequent processes.

•Machinery in use: HEAT SETTING

STENTER FRAME


Stenter Frame
 Model: 6 chamber stenter machine
 Manufacture: yammuna textile industries
1. Temperature – Between 60 to 180 ͦ c depending on the type of fabric being
processed
2. Mangle pressure – 4 to 6 kg per cm sq.
Number of stenter machine – 5


Singeing
•fuzzy and protruding fibres are removed by burning them off.
•The main purpose is to get a clear and smooth surface.
•Usually performed on both sides of the fabric
Machinery in use:
 Manufacturer – OSTOFF singe
Specifications:
Double Jet Burner
Automatic Flame width adjustment
Four singeing positions, centring devices, slat rollers, counter rotating scroll rolls
Sequencing unit
Speed – 100 m/ min (can be maintained according the fabric requirement)
Flame intensity can also be controlled.

Decatising
•also known as crabbing, blowing, and decating,
•is the process of making permanent a textile finish on a cloth.

DECATIZING

OPEN KIER
DECATIZING DECATIZING


Kier Decatising
 Model - PF – 2000
 Manufacturer – TMT, Italy
Specifications:
1. Working width: 1700 meters
2. 3 decatizing cylinders with a diameter of 460 mm
3. Two beams have wrapper above them and one of them is vacant.
4. Exit with roll device.
•Length of fabric rolled at once is 800 metres.
•1 roll take half an hour for decatising out which the beam is placed in kier for
15 to 20 min. Other 10 minutes are for cooling. It complete the chemical
finishes being given to the fabric by baking the fabric using stem.

•Production capacity of the machine - 25000 m everyday approximately.


Calendering
“A finish process given to the fabric to give shine and lusture to the fabric. It is
done to enhance the aesthetic appeal of the fabric.”
Machinery in use:
 Model - 3 bowl calendar machine
 Manufacturer – Prabhat textile corporation
Specifications:
•Running speed – 5 to 30 meter per minute (it is generally operated at 25 to 28
meter per minute speed.)
•Pressure – 2 to 35 tons
•Maximum temperature – 180 ͦ C
•Roller face diameter – 600 mm to 3800 mm
•Top bowl diameter – 200 mm
•Embossing roll diameter – 460 mm
•Heating element – electric pipe heating
No. Of Calendering machine - 2

Super Finishing Machine
•Another finish process given to the fabric.
•It has the same function as that of the Calendering machine i.e. to enhance the
physical finishes of the fabric, but the finish produced by this machine is superior
in quality to that of the Calendering machine.
• It is generally done on expensive fabric or on the specification of the buyer.
Machinery in use
 Manufacturer – Prabhat textile corporation
Specifications:
•No. Of bowls – 6
•Speed of the machine – 25 to 30 meter per minute
•Temperature of heating rollers – 15 0 ͦ C


Drying Range
Drying range is used to dry the fabric after scouring, dyeing and several such
processes. The machine contains a tank where washing of the fabric takes
place prior to dry on the seam heated drums.
Machinery in use:
 Manufacturer: yammuna textiles machinery.

Specifications:
1. Total number of drums – 20
2. Number of Teflon coated drums – 10
3. Speed of the machine – 50 metre per minute ( can be controlled according to
the requirement)
4. Pressure of the steam in the drum – 1.5 to 4 kg per cm sq.
5. Mangle pressure – 2.5 to 5 kg.

HT/HP Dyeing Machine
HT/HP dyeing machine is used for following processes:
Fibre Dyeing
Tops Dyeing
Yarn dyeing.
Wool Scouring.
Dyeing carriers are classified into 3 sections according to their weights:
1 kg, 1.5 kg and 2kg carriers are used for fibre and tops dyeing
depending upon the requirement of the quantity to be dyed.


HT/HP Dyeing Machine
Requirements for HT/HP dyeing:
Total time consumed for dyeing medium and light shades: 1.45 hours.
Total time consumed for dyeing heavy shades: 2 hours.
Softener used for dyeing: Metashear.
Temperature for wool: 94 ͦ C
Temperature for polyester: 135 ͦ C
ph of dye bath: 4-4.5


RF Dryer
•In a radio frequency heating system the RF generator creates an alternating
electric field between two electrodes, which produces heat.
•The amount of heat generated in the product is determined by the frequency, the
square of the applied voltage, dimensions of the product and the dielectric loss
factor of the material, which is essentially a measure of the ease with which the
material can be heated by radio frequency waves.


Processing-BSL

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to Processing-BSL

Similar to Processing-BSL (20)

More from Rajeev Sharan

More from Rajeev Sharan (20)

Recently uploaded

Recently uploaded (20)

Processing-BSL