Productcatalogue 2011                        Fermit GmbH
A little bit aboutthe history...In the early 20th century, paints forsteam locomotives were already beingproduced under th...
Thanks to cooperation with the BARTHELEMY Group , the company now has a productresearch centre at its disposal which makes...
CERTIFIED ACCORDING TO DIN EN ISO 9001: 2008    Productcatalogue                           2
SANITARY EQUIPMENTTHREAD SEALS                                                                                            ...
SANITARY EQUIPMENTTHREAD SEALS                                                                                            ...
SANITARY EQUIPMENTTHREAD SEALS                                                                                            ...
SANITARY EQUIPMENTPRODUCTS FOR PVC PIPE INSTALLATION                                                                      ...
SANITARY EQUIPMENTINSTALLATION PUTTIES                                                                                    ...
SANITARY EQUIPMENTSEALANTS                                                                                                ...
SANITARY EQUIPMENTSANITARY MAINTENANCE                                                                                    ...
HEATING EQUIPMENTREFRACTORY PRODUCTS                                                                                      ...
HEATING EQUIPMENTMAINTENANCE                                                                                              ...
General Terms and Conditions of Business of Fermit GmbH1.   Conclusion of contract1.1 For the business relations between F...
General Terms and Conditions of Business of Fermit GmbH5.   Retention of title5.1 The goods shall remain our property up t...
Fermit GmbH                                  Zur Heide 4-D-53560 VettelschoßPhone: +49 (0) 2645-2207 - Fax: +49 (0) 2645-3...
Upcoming SlideShare
Loading in...5
×

Fermit India, salesATprojectsalescorp.com

335

Published on

Published in: Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
335
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Fermit India, salesATprojectsalescorp.com"

  1. 1. Productcatalogue 2011 Fermit GmbH
  2. 2. A little bit aboutthe history...In the early 20th century, paints forsteam locomotives were already beingproduced under the trademark FERMIT.The business field was rapidly widenedwith the production of sealants and inthat way accompanied the developmenttowards more comfort in the home. becomes
  3. 3. Thanks to cooperation with the BARTHELEMY Group , the company now has a productresearch centre at its disposal which makes possible the launching of new products andmaterials in keeping with technical progress and the regulations, the company being ableat the same time to retain its autonomy, its specific orientation and the response timeswhich established its reputation.Thanks to the presence of the Group in several European countries, FERMIT will benefitfrom the promotion of its development activity in Germany and Europe and is strengtheningits ability to provide customers from different countries with assistance and support. The German company with its head office in Vettelschloß/ Kalenborn (near Bonn) in Rhineland-Palatinate has more than 1800 m3 of land built-upon for production, logistics and customer service. With its 18 machines for production and conditioning the company of FERMIT and its 15 employees set everything in motion for the satisfaction of their customers. Fermit provides a comprehensive Their quality makes products from range of products for heating and Fermit indispensable helpers with sanitary equipment which meet which users can always be sure to all the requirements in the areas deliver faultless work. of heating construction and sanitary technology. Fermit sells its products via the Sealing of threaded specialised trade: connections, glued and Trade in sanitary equipment plug-in connections and heating construction. Plant maintenance as well as Direct selling materials for sanitary and to industry. heating installations and for domestic equipment units All product information can be viewed on our Website: Certified according to WWW.FERMIT.DE DIN EN ISO 9001: 2008 For more detailed information we will be pleased to be available to you during our office hours. 1
  4. 4. CERTIFIED ACCORDING TO DIN EN ISO 9001: 2008 Productcatalogue 2
  5. 5. SANITARY EQUIPMENTTHREAD SEALS Clean and non-toxicNEO FERMIT UNIVERSAL Non-sticky Does not irritate skin For metal threaded connections in conjunction with hemp Suitable for gas and drinking water in domestic equipment installation. Solvent-free Non-shrinking Area of use: Non-hardening Water – for drinking water, hot and cold: Temperature range: 0°C to +95°C / Pressure: 16 bar Area of use: Heating: Temperature range: 0°C to +130°C / Pressure: 7 bar Does not dry up Area of use: Gas: Temperature range: -20°C to +70°C / Pressure: 5 bar Dismountable Use: for all types of gas including natural gas and liquefied petroleum gas in the gaseous phase 150g tube 325g tube 450g tin 800g tin 4kg bucket 01002 01003 01004 01005 01007 According to DIN EN 751-2 and DIN 30660 approved by DVGW (German Gas and Water Association) for domestic installation of gas and drinking water under: DVGW – Reg. No. NV-5142BM0052.HEMP Flax Use together with the sealing pastes Neo Fermit Universal, Fermit-Spezial and Hochdruck-Fermit. Improves the stability of the connection under pressure. Temperature resistance: +140°C 200g tress 80g bobbin 40g bobbin Dispenser 40g flax dispenser 80g flax dispenser 24002 24003 24007 24004 24005 24006 Easy to work withFERMIT SPEZIAL (service water) Seals immediately Can be dismounted at any time Light-coloured thread sealing paste, can be worked easily and quickly and does not harden. Does not dry up Application in conjunction with hemp. Reliable and safe Not for gas and drinking water units in domestic equipment installation. Temperature range: -25°C to +100°C 70g tube 650g tin 5kg bucket 02001 02003 02004 For all threads according to DIN 2999 up to a diameter of 2 inches. Gas, water, heating and compressed air units up to a maximum pressure of 10 bar. In the case of flange seals coat both sides with Fermit-Spezial. Productcatalogue 3
  6. 6. SANITARY EQUIPMENTTHREAD SEALS Easy to work withHOCHDRUCK-FERMIT Does not dry up Connections can be undone again Pressure-proof and heat-resistant putty, also in conjunction with hemp Non-toxic, pasty putty for sealing threads, Heat and high pressure-resistant flanges and faces on high-pressure equipment, Reliable/safe turbine casings, steam lines etc. Can be stressed immediately Temperature range: up to +160°C / Pressure: 16 bar 650g tin 5kg bucket 03001 03003 For all threads according to DIN 2999 up to 2 inches in diameter Coat flanges, faces and intermediate shims on both sides with Hochdruck-Fermit Easy to work withFERMITOL liquid Seals can be put into service immediately Versatile liquid synthetic resin sealant Integrated brush Universal sealing compound and glue, resistant to oil; liquefied Practical in use petroleum gas, petrol, benzene, paraffin/kerosene, greases, water, Instant sealing steam, acid, alkaline solution, brine, seawater etc. ..., once set also Reliable – safe resistant to spirit and all fuel mixtures Economical For the sealing of threads, flanges and faces on water, petrol, grease and oil lines, Can be used with and oil heating units, propane gas units, engines, engine casings, gearboxes, machines, without hemp process equipment and tanks. Fermitol is suitable for many purposes and numerous materials. Temperature range: -10°C to +130°C / Pressure: 4 bar 125g bottle 250g bottle 1kg refill bottle 04001 04002 04004 Use without hempFERMITAN service water Suitable for hot and cold water Can be subjected to Anaerobic sealant for cylindrical and conical metal threads pressure quickly for hot and cold water circuits . Enriched with PTFE Temperature range: -30°C to +90°C, briefly up to 110°C Pressure: After 15 min = 4 bar, after 2 hrs = 30 bar Polymerisation time: 1 – 3 hours Max. thread diameter: 2 inches Max. thread play: 0,25mm 75ml bottle 05001 Use without hemp Heating Suitable for hot water, gas and oil circuits Anaerobic sealant for cylindrical and conical metal threads Can be subjected to for hot water circuits in the heating field as well as oil and fuel oil and for all pressure very quickly combustible gases such as butane, propane, natural gas and for compressed air. Enriched with PTFE Temperature range: -30°C to +90°C, briefly up to 120°C Pressure: After 15 min = 4 bar, after 2 hrs = 30 bar Max. thread diameter: 2 inches Polymerisation time: 1 – 3 hours Max. thread play: 0,25mm 75ml bottle 05002 According to DIN EN 751-1 class H, DVGW-Reg.-No. NG-5146 BU 0219. Productcatalogue 4
  7. 7. SANITARY EQUIPMENTTHREAD SEALS dismantlablePTFE tape easy and quickly applicable not flammable and does not burn PTFE thread sealing tape for metal threads Application in all sanitary and heating circuits in the hot and cold no use-by date water areas. DVGW tested. DIN EN 751-3 resistant against fungal attacks Temperature range: -60°C to +260°C / Pressure: 20 bar does not swell up FRp; DN < 10 / GRp: 10 < DN < 50 PTFE Goldenband DVGW and BAM tested and approved, DIN EN 751-3, DIN 30660 KTW; for natural gas, oxygene, lye, chemicals, oil, water, gasoline, and so on Temperature range: -400°F to +500°F / -240°C to +260°C / Pressure: 30 bar for oxygen: up to 60°C and 40 bar . Liquid and gaseous FRp GRp GoldenBand 24010 24011 24012 dismantlablePTFE pipe sealing thread easy and quickly applicable not flammable and does not burn FERMIT PTFE pipe sealing thread • DIN-DVGW for gas and water installations according to EN751-3 FRp and GRp no use-by date and DIN 30660 (NV-5143BP0261), tested & approved up to 100 bar pressure in resistant against fungal attacks accordance with EN751-3 for gases of the 1st, 2nd and 3rd family and for hot water does not swell up • DIN DVGW tested & approved for pipe adjustments up to 45°, for hot & cold & drinking for all types of threads out of water in accordance with KTW recommendations of the German Health Ministry metal or plastic • WRAS listed product for U.K. Water Regulations Advisory Scheme for use for solar installation with hot and cold water (Ref. 0212515) with integrated cutter • ASTM F423 Steam & Cold Water Cycle Test - passed no drying • BAM tested & approved for use with gaseous oxygen at 30 bar and 100°C remains soft and pliable (for use with the installation aid, II-2742/2004E) • BAM tested & approved for use with liquid oxygen at 30 bar and 100°C (use without installation aid, II-2742/2004E) • UL Listed Seal Material 10BN File MH26734 according to Outline 1321 for use in assemblies handling gasoline, petroleum oils, naphta, propane, butane, benzene, kerosene and natural gas (<300 psig) • KIWA GASTEC Qa (NL): norm. 31, class "20" • Absolutely chemical resistant to most aggressive chemicals, solvents, fuels and acids, completely resistant to surface fouling, oxidation, embrittlement, fungal or bacterial growth, enzymatic or microbiological attack Installation: Beginning at the end of the thread, wrap in a overlapping haphazard fashion in the direction of the thread, apply 2 or 3 drops of the installation aid directly from the separate dispenser and smear over the PTFE with the finger, concentrate at the end of the pipe and cover only 10 to 15 mm of the thread The manufacturer`s guidelines on the number of wraps are: 1/2" pipe 12 (fine threads) to 18 (coarse threads) wraps 1 1/2" pipe 16 (fine threads) to 24 (coarse threads) wraps for other pipe diameters adjust the number of wraps Temperature range: -200°C to +240°C / Pressure: 30 bar up to 100°C for oxygen, up to 100 bar for hot water Thread sealing tape 175 m 24013 Productcatalogue 5
  8. 8. SANITARY EQUIPMENTPRODUCTS FOR PVC PIPE INSTALLATION Gel-likeFERMITAC ADHESIVE Does not drip Does not leak out Universal hard PVC adhesive for pressure and drainage systems Suitable for connections of tubes and threads made of hard PVC in Effective after only 1 hour the hot and cold water area as well as for drain pipes and buried PVC Slight odour pipes. Clean Easy to use Working temperature: +5°C to +35°C / Temperature range: bup to 90°C Curing time: at a diameter < 90 mm = 1 hour Colour: transparent for diameter from 25 up to 160 mm (for other diameters please contact the manufacturer) for pressures up to 25 bar (for other pressures please contact the manufacturer) 80ml bottle with brush 125 ml bottle with brush 125ml tube 250ml bottle with brush 500ml bottle with brush 1l bottle with brush 22101 22106 22102 22103 22104 22105 to May 2011 available to May 2011 available from June 2011 available Easy to applyFERMITAC CLEANER Takes effect immediately Reliable and safe For the cleaning of connections made of PVC and PVCC before gluing The product cleans the surface to free it from dirt and grease, etches the surface and hence helps to improve gluing. 125ml bottle 500ml bottle 1l bottle 22001 22002 22003 water-miscibleFERMIT LUBRICANT suitable for drinking water suitable for all diameters Lubricant for plastic pipes out of synthetic based raw materials Use in the installation of plastic pipes above all in the sanitary very good lubrication and sliding caracteristics Temperature of use: -5°C to +40°C / Storage: +5°C to +25°C skin-compatible Colour: white In line with the guidelines of the TZW Karlsruhe (Technology Centre for Water) 250ml bottle 500ml bottle 21001 21002 Productcatalogue 6
  9. 9. SANITARY EQUIPMENTINSTALLATION PUTTIES Permanently plasticPLASTIC FERMIT – white Ductile Economical a permanently plastic sealing compound Plastic-Fermit is a permanently plastic, kneadable sealant com- Can be worked quickly pound based on plastic which meets the highest demands made on Does not become brittle sanitary installation. Good adhesion power Is particularly suitable for the insertion of drain valves in, for exam- Storable indefinitely ple, washstands, baths and is suitable for hot and cold water. Temperature range: 0°C to 120°C. Do not use for marble or other natural stone! 250g tin 500g tin 1kg tin 5kg bucket 06001 06002 06003 06004 ViscoplasticAQUA FERMIT - red Easily kneadable Strong adhesion power Sealant and sleeve putty without hardening Putty with strong adhesion power for washstands and water closet Reliable - Safe bowls as well as sewerage units or sleeves on buried lines. Temperature range: 0°C to 100 °C 250g tin 500g tin 5kg bucket 07001 07002 07004LUBRICANTS Food-safeGLISSA VALVE AND FITTING GREASE Non-dripping Ductile Non-dripping lubricating grease for hot and cold water valves and fittings. Ductile, smooth, non-dripping lubricating grease for valves and fit- Reliable tings, that with regard to food law is beyond reproach and is there- fore also suitable for drinking water pipes. Can also be used for machines and equipment where Glissa valve and fitting grease comes into contact with food or drinking water. Temperature range: -20°C to + 140°C. 60g tube 30g tube 14g tube 15001 15002 15003 In conformity with the KTW recommendations of the German Federal Health Office, is approved according to NSF-H 1 and to DIN 51502. SyntheticGLISSA ALLGAS VALVE GREASE Non-dripping Ductile High-grade lubricant for gas valves and fittings and actuators in accordance with DIN EN 377. Suitable for gas valves and fittings Glissa all gas valve grease is resistant to all gases and gas mixtures mentioned in DVGW worksheet G 260. It is also used for greasing cock plugs or sealing elements such as membranes, packings or elastomer seals etc. Temperature range: up to 150°C 20g tube 15010 Corresponds to DIN DVGW 96.01e 1055 Productcatalogue 7
  10. 10. SANITARY EQUIPMENTSEALANTS LightfastFERMITOPP N Odourless Elastic Neutral cross-linked silicon joint sealant Elastic, odourless silicon joint sealant with fungistatic incorporation, Cleaner-resistant lightfast, cleaner-resistant and reacting with atmospheric moisture. fungal growth For sealing, above all in sanitary and damp rooms, in the kitchen area and in sectional furniture, suitable for acrylic. Temperature range: -40°C to 120°C / Processing temperature: +5°C to +40°C Colours: transparent, white, grey / Storage: for at least 1 year cool and dry 310ml white cartridge 310ml transparent cartridge 310ml grey cartridge 16001 16002 16003 LightfastFERMITOPP E Elastic Cleaner-resistant Acetic cross-linked silicon joint sealant Elastic silicon joint sealant with fungistatic incorporation, lightfast, fungal growth cleaner-resistant and reacting with atmospheric moisture. For sealing, above all in sanitary and damp rooms, in the kitchen area and in sectional furniture. Temperature range: -40°C to 120°C / Processing temperature: +5°C to +40°C Colours: transparent, white / Storage: for at least 18 months cool and dry 310ml white cartridge 310ml transparent cartridge 16010 16012 simply in the handlingPUTTY SPRAY GUN A-ZAHN quick and clean Putty spray gun with rack sturdy toothed connection rod for pressing out of standard cartouches 310 ml (silicon, glue, refractory boiler putty, ...) 1 Putty spray gun 17002 quick and cleanGASKETS FOR WALL-MOUNTED VALVES AND FITTINGS adhesive film on one side mountable without tools New sealing technology for wall fittings Can be used for the sealing of wall fittings/S bends in the sanitary no more wall closing with silicon area. Prevents moisture from penetrating into the masonery, again dismantlable plaster, dry construction, ... no dirt on screw rosette or S bend Two-Set 23001 Productcatalogue 8
  11. 11. SANITARY EQUIPMENTSANITARY MAINTENANCE Soluble in cold waterFERMITEX Powder Automatic Highly effective Chemical pipe cleaner Eliminates blockages, unpleasant odours and dangerous bacteria in Effervescent the drains from sinks, wash basins, water closet bowls and urinals Takes effect quickly simply, quickly and reliably. Does not attack metals (apart from alu- Simple to apply minium and zinc), glass or porcelain. In the event of use on enamel separately dissolve Fermitex beforehand and do not leave it standing in the enamel too long, as the latter can otherwise become dull. The pipe cleaner is corrosive, so use suitable means of protection. 1kg tin 5kg bucket 12001 12002 scentless Liquid Automatic Highly effective Chemical pipe cleaner Eliminates blockages, unpleasant odours and dangerous bacteria in colourless the drains from sinks, wash basins, water closet bowls and urinals Takes effect quickly simply, quickly and reliably. Do not use in connection with alumi- Simple to apply nium, zinc or gold-plated fittings. In case of regular use it is preven- ting from blockages and bad odours. The pipe cleaner is corrosive, so use suitable means of protection. 1l bottle 12005 Productcatalogue 9
  12. 12. HEATING EQUIPMENTREFRACTORY PRODUCTS Easy to work withFROSCHMARKE REFRACTORY BOILER PUTTY Asbestos-free Non-shrinking Sealing putty on potassium water glass basis. Non-shrinking refractory boiler putty e.g. for sealing off from flue Seals well gases during the use of boiler equipment, ovens and stoves. Adheres well to metal and other materials Temperature-resistance: more than +1000°C Non-crumbling 250g tin 500g tin 1kg tin 6kg bucket 20kg bucket 310ml cartridge 11001 11002 11003 11005 11006 11007 very good adhesivenessREFRACTORY GLUE HT 1100 very high temperature resistance no smoke development Adhesive for fireproof construction units Refractory glue HT 1100 is for sticking together fireproof construction easy to apply units and for fastening of glass fibre or ceramic fibre sealing cords, fireclay materials to metal parts, gluing of jacket tubes, sleeves and other fireclay parts, setting fireclay bricks in stoves and heating units, designed to adhere insulating board, ... Temperature resistance: 1100°C Colour: beige Storage time: 24 months cool and dry in a closed packing 310ml cartridge 17ml tube 11301 11302SEALANTS Highly refractoryFERMITOPP HN 300 Odourless Hot air-resistant Highly refractory, neutral cross-linked elastic single-package silicon sealant Reliable - Safe Fermitopp SE 300 is used for sealing expansion joints on heating UV resistant flues, ovens, reactors, chimneys, stacks, etc., also applicable in the colourfast automotive sector. Temperature range: -50°C to +250°C / Processing temperature: +5°C to +40°C Skin formation: approx 10 min. / Time to complete cure: approx. 2 mm per day Storage time: 12 months cool and dry 310ml cartridge red 310 ml cartridge black 16004 16005 Highly refractoryFERMITOPP HE 300 Hot air-resistant Reliable - Safe Highly refractory, acetic crosslinked sealant elastic single-package silicon sealant UV resistant Fermitopp SE 300 is used for sealing expansion joints on heating colourfast flues, ovens, reactors, chimneys, stacks, etc., also applicable in the automotive sector. Temperature range: -50°C to +250°C (in spikes up to 300° C) Processing temperature: +5°C to +40°C / Skin formation: approx 10 min. Time to complete cure: approx. 2 mm per day / Storage time: 18 months cool and dry 310ml cartridge red 16013 Productcatalogue 10
  13. 13. HEATING EQUIPMENTMAINTENANCE Protection from rustNIVO GRAPHITE PASTE – Flexoperm Highly refractory Versatile Highly refractory sealing paste for threaded and flanged joints Prevents the sticking of gaskets, bolts, screws etc. which are expo- Reliable - Safe. sed to intense heat. In the case of flange gaskets and surface seals, coat both sides with the paste. In the case of use as sealants for threads (DIN 2999) at over 160 degrees C, the use of aluminium hemp with Nivo Graphite Paste is recommended as normal hemp becomes scaly at these temperatures and then leaks can occur. Temperature range: 0°C to +300°C 500g tin 13001 Low cost3-D-SEALANT Versatile Easy to use Liquid sealant for small leaks. 3-D-SEALANT closes pores, cracks or damage to gaskets and seals on heating boilers, radiators, pumps, cylinder blocks and car radiators from the inside so that they are absolutely water and steam pressure-tight. 3-D-SEALANT is not suitable for the sealing of particularly narrow pas- sages such as, for example, in the case of thermostat valves. Input quantity: 1kg of 3-D-Sealant for 150 l of heating water Preparation: thoroughly mix 1 kg of 3-D-Sealant with approx. 10 l of hot water 1kg bottle 14001 Productcatalogue 11
  14. 14. General Terms and Conditions of Business of Fermit GmbH1. Conclusion of contract1.1 For the business relations between Fermit GmbH and the Purchaser the following terms and conditions governing sale and delivery shall apply in the version applicable at the point in time of the purchase order. Any terms and conditions of the Pur- chaser deviating from them shall only apply to the extent that they have been expressly recognized in writing in the individual case.1.2 Our quotations shall be without engagement. Orders shall be deemed to have been accepted by us if we have confirmed this in writing to the person placing the order or have executed delivery tacitly.1.3 Collateral agreements, amendments to, or cancellation of the contract shall require to be made in writing in order to be legally effective. This shall also apply to any departure from the requirement of the written form.1.4 To the extent that personal data are stored or are otherwise processed, we shall meet the requirements of the German Federal Data Protection Act. We shall store and process personal data only to the extent that is necessary within the scope of the contractual relationship.2. Prices2.1 Our prices shall be net prices. The sales or value-added tax applicable in each case shall be separately charged and shown openly.2.2 The basis for pricing shall be ex Vettelschoß – Kalenborn. The cost of transport, packaging and storage shall be charged separately by us. From a minimum order value of € 500.00 we shall offer the Purchaser the refund of the cost of transport. In that case a credit for the cost of transport applied shall be made when the invoice is issued.3. Delivery3.1 The Purchaser shall be obliged to take over and to accept the goods ordered. If the goods are damaged in transit or if the goods listed in the consignment note is not completely delivered, the consignee must have the damage noted in detail on the consignment note by the deliverer and confirmed by signature. The consignment note with the entry concerning the damage is to be passed on to us.3.2 The statement of delivery times shall be without engagement, unless a delivery time has been promised in writing by us.3.3 If disruptions of operations, force majeure, fire damage, traffic slowdown, shortage of raw materials or other events which are beyond our control – regardless of whether they have happened to us or to one of our external suppliers – prevent the fulfilment of our supply obligation, the delivery time shall be extended by the duration of the disruption. Otherwise both parties shall be entitled to withdraw from the contract if as a result of such unforeseen events delivery subsequently becomes impossible or unreasonable.4. Terms of payment4.1 Our invoices shall be payable within 30 days of the date of delivery and invoicing or within 10 days with 2 % discount for early payment. The acceptance of bills of exchange or cheques shall be done on account of performance.4.2 If the time permitted for payment is exceeded, we shall be entitled to demand default interest in the amount of 5 % above the respective base interest rate at the latest as from the 31st day after the due date and receipt of the invoice. If we have provably incurred a higher loss as a result of the delay we shall be entitled to claim for it.4.3 Against our accounts receivable offsetting shall only be permitted with such accounts receivable as are undisputed or which have been recognised by declaratory judgement. Productcatalogue 12
  15. 15. General Terms and Conditions of Business of Fermit GmbH5. Retention of title5.1 The goods shall remain our property up to complete payment of all of the accounts receivable due from the Purchaser.5.2 In the event of default on payment or any other behaviour not in conformity with the contract, we shall be entitled to withdraw from the contract and to demand the surrender of the goods subject to retention of title if we have beforehand fruitlessly allowed the Purchaser a reasonable period of time for the settlement of payment.6. Warranty6.1 The Purchaser shall be obliged to complain about any obvious defects without undue delay.6.2 If there is a defect in the goods for which we are responsible, the Purchaser can demand subsequent performance in the form of reworking or substitute delivery. As long as we meet our obligations of subsequent performance, the Purchaser shall not be entitled to demand any reduction of the purchase price or to declare withdrawal from the contract.7. Liability7.1 Unless stated otherwise below, further claims by the Purchaser – no matter on what legal grounds – shall be excluded. Therefore we shall not accept any liability for damage which has not been caused to the item delivered itself. Neither shall we accept liability for any loss of profit or for any other property damage/loss incurred by the Purchaser. To the extent that our liability is excluded or restricted, this shall apply also to the liability of our employees, representatives and vicarious agents.7.2 The restriction of liability subject to a ruling under Item 7.1 shall not apply if the cause of the damage or loss is based on intent or gross negligence, or personal injury (damage to life and limb or impairment of health) is involved. Neither shall it apply if the Purchaser makes claims under the German Product Liability Act on the grounds of the absence of a warranted characteristic or on the grounds of a breach of material contractual obligations.8. Place of performance and place of jurisdiction The place of performance and place of jurisdiction shall be Linz/Rhine9. Discounts Arrangements concerning discounts shall be made solely in individual cases and only in writing. Status: as of January 2006 Productcatalogue 13
  16. 16. Fermit GmbH Zur Heide 4-D-53560 VettelschoßPhone: +49 (0) 2645-2207 - Fax: +49 (0) 2645-3113 - Homepage: www.fermit.de - E-Mail: info@fermit.de CONTACT FERMIT GMBH Baden-Württemberg / Bayern Mr. Guido Wiest Zur Heide 4 53560 Vettelschoß Office +49 (0) 151 - 22 68 75 77 Fax +49 (0) 7392 - 91 24 29 Schleswig-Holstein, Hamburg, North-Niedersachsen, Mecklenburg-Vorpommern Fa. Theodor Renner Mr. Jürgen Wendler von Borstel Schenefelder Landstraße 16 25421 Pinneberg Phone +49 (0) 4101 - 552 433 Fax +49 (0) 4101 - 552 403 Berlin, Brandenburg, Sachsen Mr. Christian Rischow Planitzstr. 32 12621 Berlin Phone +49 (0) 30 - 32 66 89 12 Edition: NovemberDecember 2010 - Photography: Fotolia - Layout: PH BINDA - 33 (0)1 56 83 90 39 Fax +49 (0) 30 - 32 66 89 11 South-Niedersachsen, Sachsen-Anhalt, PLZ 32 and 33 from NRW Mr. Walter Stremming Hahnenstr. 5 31241 Ilsede Phone +49 (0) 5172 - 93 322 Fax +49 (0) 5172 - 93 323 Nordrhein-Westfalen (without PLZ 32 and 33) Fa. Fritz Ostermann Mr. Boris Jankiewicz Rensingstr. 36-38 44807 Bochum-Riemke Phone +49 (0) 234 - 53 557 Fax +49 (0) 234 - 53 558 Hessen, Rheinland-Pfalz, Saarland, Thüringen Mr. Michael Lotz Postfach 13 47 65703 Hofheim / Ts. Phone +49 (0) 6192 - 36 061 Fax +49 (0) 6192 - 37 580 Austria Mekisan Handelsgesellschaft mbH Mr. Max Mensing Gratweinerstr. 63 A-8111 Judendorf-Straßengel Phone 0043 - 664 105 27 93 Fax 0043 - 312 42 35 70

×