Omar's CV

Personal Qualifications
• B.SC. chemical engineering, Syria, 1996
• 15 years experience in oil /gas processing, gained experience in process Equipment, Gas
processing and all Utilities plant.
Professional Experience
Work History :
• Process Engineer : from September 1, 2010 to 23 August 2015 - Gasco Company,
Habshan /Bab plant Division(technical service department )
• Operation instructor: from January 1, 2005 to September 2010 - Gasco Company,
Habshan /Bab plant Division.
• Assistant shift controller: from April 11, 2003 to December 31, 2005 - Gasco
Company, Habshan /Bab plant Division.
• (shift engineer ): from Jan ,1997 to April 9, 2003 (Dez LPG gas plant – Conoco
Phillips
• Operation Supervisor developee: from September 1, 1996 to ,Dec 1997 (Gibbsa gas
plant – SGC (Syrian Gas Company )
Skills gained from experience including :
Process Engineering skill:
• Perform Material Balance/Stoichiometric calculations
• Perform Principles of Units of Measurements and conversion factors
• Perform Energy Balance calculations
• Review Physical Properties of natural gas components
Page: 1 of 5

• Review Thermodynamic concepts/phase behavior of hydrocarbon systems
• Review Gas Plant Feed characteristics (Different feeds) Th C, F etc
• Ensure Product Specifications and their significance on the process upstream and
downstream.
• Ensure Intermediate products specifications and their significance
• Use of Process Simulation package (such as HYSYS,
• Create and report Monitoring of Safe Operating Limits Exceedence
• Daily /monthly Monitoring of the plant
• Involved in hashan-5 Unit Performance Test Runs
• Participate in HAZOP sessions
• Participate in SIL study
• Participate in RCA study
• Participate in RBI study for Habshan2,3,4 and Bab plant
• Evaluate and initiate Plant Change Request (PCR)
• conduct Process Work Sheets usage
• Detailed understanding of PID, PFD, GA drawing, Equipment Detail Drawings.
• Review Corrosion fundamentals/material selection for gas processing industries
• Review Safeguarding Memorandum & Process Safeguarding Flow Schemes
• Knowledge of different Instruments, flow meters, control valves. PID controllers and
DCS operations, Temperature, Pressure compensation, Custody metering and
Advance Process Control
• Review Details of Process Control logics, ESD system, Cause and Effect diagrams.
• Participate with Alarm Management System
• Concept of different Layers of Protections in safeguarding
• Review and conduct Different relief scenarios and relief valve calculations. Different
types of relief valves
• Knowledge of GASCO DGS, API, SHELL DEP.
• Expertise and process improvements & Optimization
• Monitoring of Plant Effluents and Emissions from the plants; Environmental
specification
• MAXIMO application and usage.
• Use PI (CPIMS) Process Book and Excel usage: advanced calculation
• Use Live link (document access)
• SPF document access
• Familiarization to ISO 9001 standard’s clauses relevant to Process Engineering and
MR for process engineering section
• Quality Policy, Quality objectives & Quality Manual
• Familiarization to ISO 9001 documents (Lever 1, Lever 2, Lever 3, Lever 4 documents)
• Familiarization to ISO 15001 Standard’s clauses related to Process Engineering
• Review Energy Policy and energy objectives
• EnPI (Energy Performance Indicators) calculations and review
• Performing Internal Audits (Quality and Energy)
• Problem Solving/ Decision Making: Application of systematic processes to the
identification and resolution of potential and actual problems
• Business Improvement: Identification of improvement opportunities and the application
Page: 2 of 5

of Business Improvement Tools (with others) for performance improvement (PRISM)
• Management and Supervisory skills
• Financial Control: Budget cycle, operating and capital expenditure, Financial Limits of
Authority
• Budget: involvement in preparation
• Budget follow up on monthly basis
• Corporate KPIs
• Report Writing and Presentation Skills
• Follow up the pre-commissioning activities in Habshan 5 like: • Degreasing • Chemical
and catalyst loading • Dry-out of fired heaters, reaction furnaces and incinerator •
Review of test run
• Involve in Habshan-5 - commissioning
• Operation Supervisory:
• Contribute to the development, implementation and regular review of the operation
policies and operation procedures.
• Ensure the effective achievement of the safely operation objectives through effect
leadership and motivating staff, provision of formal & informal feedback and appraisal
and optimize performance
• lead and supervise the activities of all Operations, ensuring adherence to HSE policies
and thereby minimize/reduce environmental ,asset and personnel damage and optimise
productivity
• Develop, direct and manage shift routine & non routine daily operation activities,
including trouble shooting, controlling different operating parameters/variables,
operation envelope and ensure smooth operation.
• Ensure sufficient manpower availability in shift throughout the year by proper planning
of employee annual leave/absenteeism.
• Ensure, validate and close work permits for maintenance activities in the department
and ensure that all precautions are taken for preparation of equipment prior to and
during maintenance activities and thereby facilitate upkeep of plant integrity by ensuring
the reliability of the plant & equipments.
• Review and verify the operating data as per the production target plans, including
Laboratory analysis and operating plant performance and ensure data accuracy.
• initiate and investigate day-to-day reports such as Incidents, Failure, Environmental,
Near Miss and Risk Assessment
• Follow up emergency response procedures To act as an Initial Response Incident
Commander / On-Scene Commander during emergencies,.
• Participate in plant shutdown planning.
• Ensure compliance to all relevant safety, quality and environmental management
policies, procedures and controls and audit.
• Manage the development of performance indicators and other statistical reports and
monitor the work progress and materials availability.
• Operation Training skills:
• Perform Presentation skills,
• Conducts training needs analysis and ensures alignment of training programs with
Page: 3 of 5

Training needs.
• Compiles and prepares all training materials in line with training requirements.
• Compiles pre and post course evaluation criteria and assessment tools in order to
identify specific training requirements.
• Presents classroom and on the job training according to curricula and business
Requirements.
• Conducts post training evaluation and follow up to determine levels of knowledge
transfer and learning through.
• Identifies gaps and areas for enhancement in course material and adapts accordingly.
• Conducts training processes associated with technical / equipment specific internal and
external training (including OJT) for allocated function / areas of responsibility.
• Compiles and conducts induction training programs to all newcomers.
• Compiles and conducts training programs for instructors and ensures the competence
standards of instructors.
• Liaises closely with mentors, coaches and supervisors, to ensure proper development
of staff..
• Prepares and submits required management reports and feedback (including statistics
and progress reports on trainees).
• Implements Quality Management standards according to requirements
• Updates the learning management systems with updated employee assessment data
and training materials.
• Have good experience in PDP (Personal Development Plan) in ADNOC (to the
optimum development of all E&P staff and Meeting Emiratization target).
• Through CAS (competency assurance system) for U.A.E operators developed and
CAMS(competency assurance management system) for U.A.E operation and
processing engineers.
• Use OTS ,GTTC pilot,
• Perform competency test assessment and verification, gap analysis].
• Certified as assessor & verifier.
• Familiar with (PSM) Process Safety Management, operation integrity policy, AIRMS
framework, HSE critical equipment, COMAH report,
• Participate in HIRA session.
• Perform PTW.
• Review Material Safety Aspects of all feeds/products handled.
• Hazard Identification and Risk Assessment: understanding and involvement
• Plant personal requirements, correct use of PPE and use of portable gas detecting
equipment.
• Defensive driving course
• Computer software: Advance user in Microsoft Office functions like Excel, word,
PPT..
Page: 4 of 5

COURSES TRAINING ATTENDED
COURSE TITLE STARTDATE ENDDATE EVENTLOCATION PROVIDER
Process Modelling Using HYSYS 17-Nov-2013 21-Nov-2013
Process Modelling
Using HYSYS
INDEPENDENT
TECHNICAL SERVICES
HSE-Level 1 Audit & Inspection(20-
oct-2013)
20-Oct-2013 21-Oct-2013
ABU DHABI-GASCO
DET NORSKE VERITAS
ISO 9001:2008 Interrnal Auditor
Course (15-Nov-2011)
15-Nov-2011 16-Nov-2011
ABU DHABI-GASCO GASCO - ABU DHABI
GAS INDUSTRIES
ISO 9001: 2008 Awareness (29-Sept-
2011)
29-Sep-2011 29-Sep-2011
ABU DHABI-GASCO GASCO - ABU DHABI
GAS INDUSTRIES
SOGAT,2010 -Sulfur work shop 29/03/2010 29/03/2010 ABU DHABI-GASCO EXPERT SYS VEN
Presentation Skills 04/02/2009 05/02/2009 ABU DHABI-GASCO
SUN LEARNING
SYSTEMS [FZE)
Habshan HGCE 10/09/2008 10/09/2008 ABU DHABI-GASCO FLOUR
Sulphur Recovery 30/10/2007 01/11/2007 ABU DHABI-GASCO EXPERT SYS VEN
CAS Assessor Course 29/05/2007 31/05/2007 ABU DHABI-GASCO TIL
GTTC Pilot system 12/08/2007 16/08/2007 ABU DHABI-GASCO SAIT
Process Simulation Software 25/11/2006 30/11/2006
ABU DHABI
-HONEYWELL
HONEYWELL
Train the Trainer 02/09/2006 07/09/2006 ABU DHABI ECOMAN
Assessor Course 18/04/2005 21/04/2005 ABU DHABI-GASCO TIL
Root causes analysis 03/09/2005 07/09/2005 ABU DHABI-GASCO GASCO
Authorised Gas Testing - Level 1 29/12/2010 Online Atlas Interactive
GASCO - Asset Integrity Overview 14/12/2010 Online Atlas Interactive
GASCO - Corrosion Awareness 26/12/2010 Online Atlas Interactive
GASCO - Corrosion Awareness 11/01/2011 Online Atlas Interactive
GASCO - Hazards of Hydrocarbons 26/12/2010 Online Atlas Interactive
GASCO - Managing Pressure and
Leak Testing 26/12/2010
Online
Atlas Interactive
GASCO - Mechanical Joint Integrity 04/01/2011 Online Atlas Interactive
GASCO - Pipeline Integrity 29/12/2010 Online Atlas Interactive
GASCO - Piping Vibration 06/01/2011 Online Atlas Interactive
Generic Confined Space Entry 17/01/2011 Online Atlas Interactive
Piping integrity 17/01/2011 Online Atlas Interactive
GAS processing /Operation&
Fundamentals of control / HSE
01/01/2001 15/03/2001 SYRIA- DEZ PLANT CONOCO PHILLIPS
LPG Plant Commissioning 01/04/2001 05/04/2001 SYRIA- DEZ PLANT CONOCO PHILLIPS
Page: 5 of 5

Omar's CV

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Similar to Omar's CV

Similar to Omar's CV (20)

Omar's CV