Visit Our Website For More Product Information at Robson.uk.com

1. Tungsten Carbide Aluminium Jacket Nozzle Nozzle Size
NTL-450 1/4” Tungsten NO.5 NOZZLE BORE
Tungsten carbide nozzles have long carbide Venturi No4 1/4" / 8.0mm
been the traditional material selection LENGTH- 5 1/4" /136mm
AIR REQUIREMENT
for most general nozzle applications 150/170 CFM
and where medium cutting abrasives NTL-550 5/16” Tung- NO.5 NOZZLE BORE
like glass bead, steel shot & grits, or sten carbide Venturi 5/16" / 8.0mm
No5 LENGTH- 5 3/4" /147mm
Copper slag are used. AIR REQUIREMENT
150/170 CFM
These widely used, robust nozzles are NTL-650 3/8” Tungsten NO.6 NOZZLE BORE
the preferred choice of blast cleaning carbide Venturi No6 3/8" / 9.5mm
LENGTH- 7" /180mm
operators, as it has excellent durability AIR REQUIREMENT
& wear when using the hard abrasive. 250/265 CFM
NTL-850 1/2” NO.8 NOZZLE BORE
Tungsten Carbide ½” / 12.5mm
Venturi No8 LENGTH- 9 1/4" /235mm
AIR REQUIREMENT
350/425 CFM
Silicon Composite Nozzle
Silicon nozzles are probably the most Nozzle Size
popular alternative to tungsten carbide SCC-450 ¼” Silicon NO.4 NOZZLE BORE
for blast nozzle applications. The low Composite Venturi 1/4" / 8.0mm
Nozzle No4 LENGTH- 5 1/4" /136mm
wear rate maintains the internal nozzle AIR REQUIREMENT
geometry and provides maximum 150/170 CFM
blasting effectiveness, minimum SCC-550 5/16” Silicon NO.5 NOZZLE BORE
Composite Venturi 5/16" / 8.0mm
compressor requirements and reduced Nozzle No5 LENGTH- 5 3/4" /147mm
downtime due to replacement. AIR REQUIREMENT
150/170 CFM
SCC-650 3/8” Silicon NO.6 NOZZLE BORE
Silicon is also about one fifth lighter Composite Venturi 3/8" / 9.5mm
than Tungsten Carbide, so it is an Nozzle No6 LENGTH- 7" /180mm
AIR REQUIREMENT
excellent choice to minimize operator 250/265 CFM
fatigue and maximize productivity.
SCC-750 7/16” Silicon NO.7 NOZZLE BORE
Composite Venturi 7/16” / 11.0mm
Nozzle No7 LENGTH- 8” /200mm
AIR REQUIREMENT
350/375 CFM
Boron Carbide Nozzle
The Boron carbide blast nozzle offer a Nozzle Size
longest life with optimum air and
Boron Carbide Nozzle NO.5 NOZZLE BORE
abrasive use. Boron Carbide blasting 550 5/16" / 8.0mm
nozzles offer the greatest resistance LENGTH- 5 3/4" /147mm
AIR REQUIREMENT
to nozzle wear. 150/170 CFM
Boron Carbide Nozzle NO.6 NOZZLE BORE
Its weight is similar to Silicon Carbide 650 3/8" / 9.5mm
LENGTH- 7" /180mm
and is much lighter than Tungsten AIR REQUIREMENT
Carbide. Boron Carbide is a far 250/265 CFM
superior .

2. Boron Alloy Nozzle
Boron Alloy cast flanged blast nozzles
is used for those short lasting contract
Nozzle Size
jobs or for the part time Blaster
BANF—550 Thread 1" and 1 1/4" Nozzle holder.
Boron Alloy Nozzle
It has to be held in place by a BANF—650 Thread 1" and 1 1/4" Nozzle holder.
lightweight Retaining Nut to Secure the Boron Alloy Nozzle
Nozzle in place BANF—750 Thread 1" and 1 1/4" Nozzle holder.
Boron Alloy Nozzle
Suits all standard coarse Thread 1"
and 1 1/4" Nozzle holder.