How can I fix a leaking pipe? This is a very common question of people who are looking for ways on how they can fix the problems in the plumbing system of their house. Knowing how you can perform simple repairs will help you save hundreds of dollars, since you no longer need to hire a plumber just to fix these simple problems.
For more information please visit my site: http://www.PlumberFortWorthTX.net
Become a Plumber in Fort Worth TX - Simple Repair Tips
1.
2. How can I fix a leaking pipe? This is a very
common question of people who are looking for
ways on how they can fix the problems in the
plumbing system of their house.
Knowing how you can perform simple repairs will
help you save hundreds of dollars, since you no
longer need to hire a plumber just to fix these
simple problems.
www.PlumberFortWorthTX.net
3. This article was written with the intention of
helping you to understand how you can fix the
simple damages in your plumbing system.
Read on to learn more about these simple and
very basic steps.
www.PlumberFortWorthTX.net
4. Before we move on, make sure that you have the
following in your toolbox:
Pipe wrench
Nuts and bolts
Extra pipe
Sealant
Teflon tape
www.PlumberFortWorthTX.net
5. The first thing that you need to do is to determine
where the damage is.
Find a leaking pipe and put a mark on it.
Once you have marked the place where the leak
is, the next thing that you need to do is to shut
down the main source of water.
www.PlumberFortWorthTX.net
6. This will prevent the water from leaking while you
try to fix the damage, and will make your task
easier.
If the leak is one the joint of the pipes, you can use
the Teflon tape to tighten the bolt.
With the help of the pipe wrench, try to remove the
pipe from the connection and use the Teflon tape
on the pipe thread.
www.PlumberFortWorthTX.net
7. This will make the thread tighter, and could solve
the problem easily.
If there is still a leak, it would be better if you are
going to replace the nuts with a new one.
Keep the Teflon tape on the pipe thread to ensure
that the pipe will be connected to the system
securely.
www.PlumberFortWorthTX.net
8. If the leak is on the middle of the pipe, all you have
to do is to use the sealant to cover the leak.
There are sealants that can be shaped depending
on the hole where you will be placing it, while
others should be applied directly.
www.PlumberFortWorthTX.net
9. If the hole on the pipe is too big to be covered with
a sealant, you can simply replace it with a new
pipe.
Make sure that you use the Teflon tape on the new
pipe to ensure that it will be tightly connected to
the plumbing system.
You also need to make sure that the sealant is
already dry before you turn the water source on.
www.PlumberFortWorthTX.net
10. If you are looking for a professional Plumber Fort
Worth TX, then you've come to the right place.
We have the best plumber in town, and you can
be assured that we will always give you the kind of
service that you need!
Visit our website now to find out why we are
considered as the #1 Plumber Fort Worth TX.
www.PlumberFortWorthTX.net