1. Getting started Page 1 of 4
Quick start
This program includes the capacity to model multiple story buildings and basements. To add a basement double-left click the white screen outside of the
building envelope to open the Project Properties dialog. Navigate to the "Floor Plan" tab. Enter the number 1 for a basement. A second page is created
below the first on the white screen for drawing the basement envelope.
Copy the existing building envelope to the lower sheet and paste it at the same origin point as the upper floor as shown.
mk:@MSITStore:C:Program%20FilesHVAC%20SolutionFloPro%20DesignerFloPro%... 7/28/2010
2. Getting started Page 2 of 4
Pipes connecting upper and lower floor plans are automatically shown as light dashed when pipes cross a sheet boundary.
mk:@MSITStore:C:Program%20FilesHVAC%20SolutionFloPro%20DesignerFloPro%... 7/28/2010
3. Getting started Page 3 of 4
Rise/drop locations appear in the same coordinate location on each page.
mk:@MSITStore:C:Program%20FilesHVAC%20SolutionFloPro%20DesignerFloPro%... 7/28/2010
4. Getting started Page 4 of 4
mk:@MSITStore:C:Program%20FilesHVAC%20SolutionFloPro%20DesignerFloPro%... 7/28/2010