Taco provides award-winning hydronic systems using the highest quality components. They offer web-enabled building management, total training and support from their new Innovation and Development Center, which is described as the most advanced learning facility in the industry. Taco has been a family-owned American company since 1920 and prides itself on listening to customers to develop sophisticated systems that save energy and benefit the environment.

1. Award winning hydronic systems. The highest quality
components. Web-enabled building management.
Total training and support. That’s Taco.
Notes from the field
PAG E
1

2. We’re the one.
We are a third generation, family-owned
American company. We started out in 1920
building Firepot Generators and grew into
the leader in high quality advanced hydronic
systems. Our systems are second to none
because we stay close to our customers, we
listen to them, and we build the sophisticated systems that satisfy the need to save
energy, resources, and the environment.
Just as our customers provide us with
valuable input, we in turn support them with
outstanding system design software, training,
field support, and internet communities to
ensure each project’s success from concept
to commissioning. The opening of our new
Innovation and Development Center marks a
milestone in our commitment to training. It
is the most advanced learning facility in the
industry, and it’s all yours.
People make the difference.
When you choose Taco, you’re partnering with the most dedicated group of great
people you’ll ever meet; people who truly
want to help you do your best work. You
don’t find that everywhere. That’s why we’re
the one.
John Hazen White, Jr., Owner, Taco, Inc.
www.taco-hvac.com
PA G E 2

3. “The most advanced learning facility in the industry”
PAG E
3

4. www.taco-hvac.com
PA G E 4

5. American Can Lofts
Cincinnati, OH
Bob Stiens of Cincinnati
Air Conditioning with
Ray Fischer, the project’s
Design Engineer
“I was very impressed with the HSS tool.
As for LoadMatch®, I’d use it again!” said
design engineer Ray Fischer. The install
also included four KV & KS Vertical
In-line Pumps, a Taco Plate & Frame
Heat Exchanger and a 4900 Series Air
Separator. Despite the space limitations,
Bob Stiens says it was a “turn-key install.”
Penn Foundation
Sellersville, PA
Glenn Synder, PE, of
Lederach and Associates
“I don’t think you can find a smarter,
more efficient mechanical system
than the one we’ve installed here.”
Full system payback was achieved
within 16 months of commissioning.
PAG E
5

6. www.taco-hvac.com
PA G E 6

7. Williston Northampton School — UPDATE
Easthampton, MA
Jeff Tannatt, Director of
Physical Plant at Williston
Phase two of the retrofit included iWorx.
“iWorx is attractive due to the ability to
control all the buildings from anywhere
there is an internet connection. No
matter what kind of HVAC equipment
we install in the future, the iWorx
system will easily adapt to it.”
Phase one of the school retrofit featured installation of the Taco LoadMatch® System. Eliminating control valves realized “big savings”
for the school. “Long term, we hope to build additional geothermally heated and cooled dormitories” said Tannatt.
Tanque Verde Apartments
Tuscon, AZ
Mo Forrey, owner of Oracle
Control Systems, Inc. (OCSI).
“iWorx controls are easy to install and
require minimal programming. There
was virtually no learning curve when we
started using the product. We’ve been
looking for a controls platform just like it...
Not only is it a great product, but our rep
stands behind it entirely.”
PAG E
7

8. www.taco-hvac.com
PA G E 8

9. Sierra Grande School
Fort Garland, CO
Steve Shaw with McCoy
Sales in Littleton, CO
“The old pneumatic controls had been
a real problem for the school, so we’re
using Taco’s new iWorx control system to
bring the building into the next century.”
This installation also utilizes six Taco1900
Series pumps that controls six zones, each
pressurized by one of Taco’s new ECM,
variable-speed Viridian® pumps.
D’Youville College
Buffalo, NY
Jeff Garwol,
Project Manager John W.
Danforth Company
“The LoadMatch® system saved us a lot
of labor time and money on materials...
Being a young engineer and evaluating
the system for the first time, I looked at
the design and the data and it all made
sense. It turned out to be a great install.”
PAG E
9

10. www.taco-hvac.com
PA G E 1 0

11. Northland Pines High School
Eagle River, WI
Mark Hanson, Director of
Sustainable Services Hoffman LLC
“The client is very happy with the
building and the HVAC performance,
as we are.”
Nathan Bishop Middle School
Providence, RI
Wayne Mattson. P.E.
Principal with G&V
Consulting Engineers
“All the hydronic equipment in the
mechanical room – the pumps, valves
and accessories - is by Taco. At Griffith &
Vary we’ve been specifying Taco products
for a good number of years. Taco’s products are very reliable and we’ve never
encountered a problem with them.”
PAG E
11

12. www.taco-hvac.com
PA G E 1 2

13. Lois Hole Library
Edmonton, Canada
David Folster, C.E.T..
Lead Designer, Williams
Engineering Canada, Inc.
“We first used the LoadMatch® system
in an Islamic center here in Edmonton.
Using the HSS design tool, everything
told us it was going to work, and it has
since day one. The Lois Hole Library is
our second install of the system. I like
LoadMatch. For pipe 2-1/2” and above,
LoadMatch makes perfect sense.”
Waterloo High School
Waterloo, IL
Tom Baker
President of
Hurst-Rosche Engineers
“Taco Hydronic Systems Solutions® (HSS)
software proved to be a great time saver
for us. It helped minimize errors, allowed
us to check and then guarantee our
design with Taco, and to link in associated
disciplines such as electrical, plumbing,
condensate piping and controls into
the system design.”
PAG E
13

14. Detail photo shown
to indicate the size of
this 4900 Series unit.
www.taco-hvac.com
PA G E 1 4

15. Florida State University
Tallahassee, FL
Robert Vaughn
FSU Utilities Superintendent
“Taco’s 4900 Series Air-Dirt Separator works
great! Several months after installation the
unit was blown down for the first time and
three barrels of sand were removed. We
perform a weekly blow down of the unit,
and we’re still removing sand and dirt each
time we do. We’ve been very impressed
with the performance of the 4900 Series unit.”
Sprint Center
Kansas City, MO
Jack Hausbeck
Foley Mechanical,
Kansas City, Missouri
“What we appreciated from an installation
standpoint, especially on a fast-track
project like this one, is the support we
received from Taco. All the equipment
arrived on site as needed, submittals
were received in a timely manner and
that permitted us to stay on schedule.”
PAG E
15

16. www.taco-hvac.com
PA G E 1 6

17. Maxim Medical Center
Buffalo, NY
Drew Nowak
MJ Mechanical, Buffalo, NY
“LoadMatch® works. Why not use it?
The Taco Hydronic System Solutions®
software makes designing, making
changes, and recalculating quick
and easy.”
Proximity Hotel
Greensboro, NC
Joe Millikan, P.E.
Superior Mechanical,
Randleman, North Carolina
“Taco brought a lot to the table in terms
of systems and design. Our partnership
with Taco on this project gave us a
complete system.”
PAG E
17

18. www.taco-hvac.com
PA G E 1 8

19. Midland Insurance Company
Cincinnati, OH
John Mullikan
Applied Mechanical
Systems, Inc.,
Cincinnati, Ohio
“With Taco you’re buying not just
the dependable products but the
excellent service we receive from their
representatives here in Ohio, Weber-Huff.”
Point Pleasant Middle School
Anne Arundel County, MD
Ray Pitt
Denver Elek,
Baltimore, Maryland
“Taco equipment was key to this steam
to hot water conversion. As big as these
Taco KV pumps are and the amount of
space we had to work with, it’s a real
nice compact job.”
PAG E
19

20. www.taco-hvac.com
PA G E 2 0

21. The Ascent at Roebling’s Bridge™ Condos
Covington, KY
Bob Cartwright
Commercial HVAC,
Cincinnati, Ohio
“Taco provides good equipment,
excellent engineering, and great
backup and support”
Renaissance Hotel
Providence, RI
Steve Beretta
Director of Engineering,
Renaissance Hotel
“Troubleshooting the HVAC closed loop
system, Taco determined that corrosive
iron oxide gunk was fouling the system’s
components. The clear solution: install
two 4900 Series Air and Dirt Separators
to eliminate microbubbles, sand, dirt and
rust in the system. “As the quality of the
system water improved”, says Steve,
“the air conditioning improved.”
PAG E
21

22. www.taco-hvac.com
PA G E 2 2

23. Taco Canada, Ltd.
Milton, Ontario
Jim Garrett
Taco (Canada) Ltd.
“The advantage of our new LOFlo®
radiant cooling system is that it
operates with a single pipe at a
much higher efficiency level. Our
new Radiant Cooling Block makes
LOFlo Cooling technology perfect
for new installations and retrofits.”
Taco (HQ) Warehouse/Distribution
Cranston, RI
Chris Integlia
Executive Vice President,
Taco, Inc.
“The LEED scorecard for the warehousedistribution facility project, mapped out
by the project architectural firm AECOM,
called for achieving 29 points to qualify
for LEED certification. Taco received
LEED NC notification in January of 2009,
and held a certification ceremony on
April 22nd, Earth Day 2009.”
PAG E
23

24. and our award-winning LOFlo® radiant cooling/chilled
beam systems are proven more economical, more
comfortable, and healthier than air systems.
The web-enabled iWorx® building
management system and LOFlo®
active chilled beam solutions are
the most comfortable, efficient
systems in the industry.
Why do business with Taco? We’re much more
than a manufacturer: we’re a total resource. Take advantage of our systems expertise, advanced hydronic
technologies, components, design software, training,
and project support. It’s all in place for you, at Taco.
E-smart® technology you can trust. We build all of
our energy-saving components for the job at hand, so
you won’t have to compromise or compensate. From
variable speed to ECM to web-enabled, from solar to
geothermal, we have what your job demands.
Lower first costs, energy use. Shift your thinking
from air to hydronic systems. E-smart® Taco LoadMatch®
Taco Catalog #300-37
PA G E 2 4
Value-addeds that are priceless. How much is
your time worth? Our easy to learn HS2 system
design software helps you draw, compare, spec, and
model systems in as little as 30 minutes. And our
mobile apps are real handy in the field.
More training. The new Innovation & Development
Center, Taco’s $20 million training center, is the most
advanced hydronic learning facility of its kind. It’s a
living lab that’s all Taco – and it’s all yours.
Real people, real support. Choosing Taco means
choosing a team that stays with you. From start to
finish, we’re here to help you do your best work.
Contact your local Taco rep or visit us on the web
to learn more about making your job easier.
www.taco-hvac.com
©2012 Taco Inc., All Rights Reserved.