2. The SRX Clustering Module (SCM) is a card that
you can install in the services gateway to
enable the dual control link feature for chassis
cluster supported in Junos OS Release 10.2.
3. When deploying SRX3600’s in H/A cluster, the
SRX cluster module utilize the redundant
architecture design of the SRX3000 line to
provide full control link resiliency for mission
critical environments.
4. To form a chassis cluster, a pair of the same kind
of supported SRX-series devices or J-series
devices are combined to act as a single system
that enforces the same overall security.
For SRX 5600 and SRX 5800 chassis
clusters, the placement and type of Services
Processing Cards (SPCs) must match in the two
clusters.
For SRX 3400 and SRX 3600 chassis
clusters, the placement and type of
SPCs, Input/output Cards (IOCs), and Network
Processing Cards (NPCs) must match in the two
devices.
5. For J-series chassis clusters, although the
devices must be the same kind, they can
contain different Physical Interface Modules
(PIMs).
When a device joins a cluster, it becomes a
node of that cluster. With the exception of
unique node settings and management IP
addresses, nodes in a cluster share the same
configuration.
6. You can deploy up to 15 chassis clusters in a
Layer 2 domain. Clusters and nodes are
identified in the following way:
1. A cluster is identified by a cluster
ID (cluster-id) specified as a number from 1
through 15.
2. A cluster node is identified by a node
ID (node) specified as a number from 0 to 1.
7. Juniper Networks Intrusion Detection and
Prevention (IDP) products provide comprehensive
and easy-to-use in-line protection that stops
network and application level attacks before they
inflict any damage to the network, minimizing the
time and costs associated with maintaining a
secure network.
Usingindustry-recognized stateful detection and
prevention techniques, Juniper Networks IDP
provides zero day protection against
worms, Trojans, spyware, key loggers and other
malware from penetrating the network or
spreading from already infected users.
8. Juniper Networks IDP not only helps protect
networks against attacks, it provides
information on rogue servers, as well as types
and versions of applications and operating
systems that may have unknowingly been
added to the network.
Application signatures, available on the Juniper
Networks IDP, goes a step further and enables
accurate detection of specific applications such
as peer-to-peer or instant messaging.
9.
10.
11. Juniper Networks IDP 75 brings full Intrusion
prevention System (IPS) capability to small and
mid-size businesses as well as remote offices.
Juniper Networks IDP 250 and IDP 800 offer
market-leading IPS capabilities to mid-size and
large enterprises as well as service providers.
Juniper Networks IDP 8200 offers market
leading performance with 10 Gbps of real world
throughput and is also suited for large
enterprises and service providers.
