2. Document n°. Rev.
DP07J1 DP07J1 00
1 AIR FLOW RATE AT W.P. MIN 4,20 m 3
/min
2 WORKING PRESSURE 7,0 BAR (G)
3 AIR TEMPERATURE INLET MAX. 50 °C (FOR SATURATED AIR)
4 DEWPOINTATW.P. - 10 °C (*)
5 PROTECTION DEGREE EL.PANEL IP55
6 NOMINAL POWER TO BE CONFIRMED BY SUPPLIER
7 POWER SUPPLY 230V / 1 / 50Hz
8 PRESSURE DROP MAX 0,4 BAR
9 CONNECTIONS:
10 AIR IN TO BE CONFIRMED BY SUPPLIER
11 AIR OUT TO BE CONFIRMED BY SUPPLIER
12
13
14
15 ADSORBED MATERIAL ACTIVATED ALUMINA 1/4
16 CYCLE TIME 5' + 5' (*)
17
18
19
20
21
22 MANUFACTURER TO BE CONFIRMED BY SUPPLIER
23 MODEL TO BE CONFIRMED BY SUPPLIER
24
25
26 WEIGHT TO BE CONFIRMED BY SUPPLIER
27
28
29
30
31
32
33
34
35
36
37
38
39
40
(*) On the D_IL dryers with EMS you can set the dryers at any dew point needed (-5°C to -40°C). The capacity flow
of the dryer is not changed, but only the cycling time that is different. The lower the dew point is needed, the
shorter the cycling time is.