ECWAY TECHNOLOGIES IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE BANGALORE / HYDRABAD CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111 Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com

1. PNEUMATIC CUP MAKING MACHINE
SYNOPSIS
Our project work is “PNEUMATIC CUP MAKING
MACHINE” it can be used making paper cup.( use and throw cup ).
This is an era of automation where it is broadly defined as
replacement of manual effort by mechanical power in all degree of
automation. The operation remains an essential part of the system although
with changing demands on physical input as the degree of mechanization is
increased.
Pneumatic paper cup forming machine” is a wonderful project topic
for mechanical engineering students.
In a pneumatic system, energy is stored in a potential state in the form
of compressed air. Working energy is produced in a pneumatic system when
the compressed air is allowed to expand. So, in order to do work, a device is
required which is able to supply an air tank with sufficient amount of air at a
desired pressure. This device usually happens to be a positive displacement
compressor.
ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com

2. AIRFROMCOMPRESSOR
PNEUMATICCYLINDER
FRAME
SHAFT
BEARING
BASE
PNEUMATICCUPMAKINGMACHINE

3. ADVANTAGES:
• The pneumatic is more efficient in the technical field.
• Quick response is achieved.
• Simple in construction.
• Easy to maintain and repair.
• Cost of the unit is less when compared to other machine.
• No fire hazard problem due to over loading.
• Comparatively the operation cost is less.
• Continuous operation is possible without stopping.
DISADVANTAGES:
• While working, the compressed air produces noise
therefore a silencer may be used.
• High torque can not be obtained.
• Load carrying capacity of this unit is not very high.