ECWAY TECHNOLOGIES IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE BANGALORE / HYDRABAD CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111 Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com

1. DESIGN AND FABRICATION OF GEAR &SPLINE
CUTTING ATTACHMENT IN LATHE
Abstract
Mechanical engineering without production and manufacturing is
meaningless and inseparable. Production and manufacturing process deals
with conversation of raw materials inputs to finished products as per
required dimensions specifications and efficiently using recent technology.
Our project design and fabrication of spline (gear) cutting attachment
is used to cut gear or splines over the cylindrical job. Our main aim is prove
lathe is a versatile machine. So this gear cutting operation is done by lathe
itself
Working
In this project End mill cutter (tool) is fixed in lathe chuck and job is
fixed over the compound slide by gear cutting attachment. This fixture has
spindle with indexing plate, here job is hold rigidly in spindle itself Feed is
given by cross slide movement. And depth of cut is given by movement of
carriage. When cutter rotate at 1100 Rpm. Angular splines also done by
this .indexing can be done with the aid of indexing plate
ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com

2. DESIGN AND FABRICATION OF GEAR AND SPLINE ATTACHMENT FOR
CONVENTIONAL LATHE
TOP VIEW
FRONT VIEW
LATHE CHUCK
END MILL CUTTER
LATHE CARRIAGE
JOB
HELICAL SPRING
JOB
SLOT GUIDE BUSH
GUIDE PIN
FIXTURE GRIPPER
SLOTTING FIXTURE ASSLY
FEED
DEPTH OF CUT
INDEXING ARM
INDEXING
PLATE
Advantage
1) Fixture cost is low
2) No need of purchase special machine for this
3) Production cost is low
Disadvantage
1) Accuracy is little bit low