2. Why look to Jesus for
leadership development?
Broad Spectrum of
effective leadership
3. Why look to Jesus for
Mother Teresa
leadership development?
Broad Spectrum of
effective leadership
4. Why look to Jesus for
Mother Teresa
leadership development? Jack Welch
Broad Spectrum of
effective leadership
5. Why look to Jesus for
Mother Teresa
leadership development? Jack Welch
Hilter
Broad Spectrum of
effective leadership
6. Why look to Jesus for
Mother Teresa
leadership development? Jack Welch
Hilter
Broad Spectrum of
Steve Jobs
effective leadership
7. Why look to Jesus for
Mother Teresa
leadership development? Jack Welch
Hilter
Broad Spectrum of
Steve Jobs
effective leadership
Bobby Knight
John Wooden
10. Does Jesus have
legitimacy as a leader?
No – failed to win over the
primary powerbrokers
Yes – Gave birth to a
movement that swept the
world like no other within a
few hundred years of his
life
11. Specific Leadership Credentials…
1. working with or living and caring for imperfect
people
2. taking time to train develop and delegate
3. under constant scrutiny and testing of
commitment and integrity
4. required to handle rejection, criticism, and
opposition
5. facing fierce competition and conflicting demands
from friends and foes
6. tempted by instant gratification, recognition, and
misuse of power
12. Specific Leadership Credentials…
7. facing serious personal issues, including turnover
and betrayal
8. required to communicate in a multicultural
environment
9. the need to challenge the status quo and
hierarchy to bring about change
10. the need to communicate a radically new vision of
the future
11. the need to call attention to poor leadership at
great personal risk
12. the need to put career or relationships on the line
to serve higher purpose
13. In looking at the leadership of Jesus
where do we begin?
14. In looking at the leadership of Jesus
where do we begin?
1. What were his domains?
15. In looking at the leadership of Jesus
where do we begin?
1. What were his domains?
2. What were his values?
17. The Values of Jesus
Matt 20:25-28
25 Jesus
called them together and said, “You know that
the rulers of the Gentiles lord it over them, and their
high officials exercise authority over them. 26 Not so
with you. Instead, whoever wants to become great
among you must be your servant, 27 and whoever
wants to be first must be your slave— 28 just as the Son
of Man did not come to be served, but to serve, and to
give his life as a ransom for many.”
18. Others & Giving
Adam Grant, Ph.D. is the youngest tenured professor
and single highest rated teacher at the Wharton
School. He's been honored as one of Businessweek's
favorite professors and one of the world's top 40
business professors under 40. In addition to being an
award-winning researcher and teacher, his consulting
and speaking clients include Google, the National
Football League, IBM, GlaxoSmithKline and the
United States Army and Navy. He is the author of Give
and Take: A Revolutionary Approach to Success.
19. Adam Grant, Ph.D – Givers & Takers
“Takers have a distinctive signature, they like to get
more than they give. They tilt reciprocity in their own
favor, putting their own interests ahead of others'
needs. Takers believe that the world is a competitive,
dog-eat-dog place. By contrast, givers . . . tilt
reciprocity in their direction, preferring to give more
than they get. Whereas takers tend to be self-focused
. . . givers are others focused.”
20. Adam Grant, Ph.D – Givers & Takers
“Givers and takers differ in their attitudes and actions
towards other people. If you’re a taker, you help
others strategically, when the benefits to you
outweigh the personal costs. If you are a giver, you
might use a different cost-benefit analysis: you help
whenever the benefits to others exceed the personal
costs.”
In between are matchers, who seek balance in their
interactions through returning the favors done to
them and expecting others to reciprocate in kind.
21. Adam Grant, Ph.D – Givers & Takers
Adam Grant advances the provocative proposition
that givers enjoy a powerful comparative advantage
over takers. His message is that the succeed-at-anyexpense takers’ tactic is a dangerous, ultimately illfated success strategy. In particular, Give and Take is a
searing indictment of the takers’ tactics of grasping,
maneuvering, and manipulating corporate executives
who literally take from their colleagues and
customers; and who by their pursuit of egregious
unethical misconduct literally take from their
company’s customers, colleagues, and shareholders.
22. Adam Grant, Ph.D – Givers & Takers
The putative poster boy of this unsustainable style is
Ken Lay, former Enron CEO, who exemplified that
“takers may rise by kissing up, but they often fall by
kicking down.”
23. Adam Grant, Ph.D – Givers & Takers
Phil Jackson convinced Jordan that if he would focus
on improving the performance of and making his
team members more successful, he would expand his
impact and ultimate success, and thereby become the
best individual basketball player and also the leader
of the best basketball team. Notably, Michael Jordan
reconfigured his game, in the process becoming even
more dominant and prominent. As he did less alone,
when game circumstances dictated the
appropriateness of more selfish play, he was even
more effective.
24. In Summary
• Jesus is worth looking to for leadership development
• A foundational element of his leadership is his values
• Others and Giving are values that we can learn to
adopt for ourselves.
• These values can bring coherence to all the domains
of our lives.
• These are values that can work.
• They work because this is the way the world is meant
to be.
• They require trust and they are a risk.
Editor's Notes
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
Picture with background removed(Intermediate)To reproduce the picture effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Insert tab, in the Images group, click Picture.In the Insert Picture dialog box, select a picture and then click Insert.Select the picture. Under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 7.5” and the widthis set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also under PictureTools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Grayscale.Also in the Adjust group, click Corrections, and then under Brightness and Contrast, click Brightness: -40% Contrast: +20%.On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.Select the second picture. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center.Under PictureTools, on the Format tab, in the Adjust group, click ResetPicture.Also under PictureTools, on the Format tab, in the Size group, click the Size and Position dialog box launcher.. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example picture is set to 3.54” heightand 3.24” width).To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.Also underPictureTools, on the Format tab, in the Adjust group, click RemoveBackground, and then do the following:To remove additional background areas from the picture, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Remove. Select all of the additional areas to be removed.To keep additional areas of the picture that have been removed, on the BackgroundRemoval tab, in the Refine group, click Mark Areas to Keep. Select all of the additional areas to be kept.Click KeepChanges in the Close group when finished.To reproduce the shape effects on this slide, do the following:On the Home tab, in the Drawing group, select Rectangle.On the slide, drag to draw a rectangle.Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.In the Format Shape dialog box, in the Size tab, enter 7.5” into the Height box and enter 4” into the Width box.Also in the Format Shape dialog box, in the Fill tab, select Gradientfill, and then do the following:In the Type list, select Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop from the leftin the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%.Select the second stop from the leftin the slider, and then do the following: In the Position box, enter 40%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 47, Green: 91, and Blue: 77.In the Transparency box, enter 0%.Select the third stop from the leftin the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).In the Transparency box, enter 90%.Also in the FormatShape dialog box, in the LineColor tab, select NoLine.Select the second picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click TextBox, and then on the slide drag to draw your text box.Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, click Calisto MT.In the FontSize list, click 36 pt. Click FontColor, and then under Theme Colors click White, Background 1 (first row, first option from the left).Position text over the least transparent part of the gradient.
