This document provides instructions for making a model of a natural water spring out of various materials. The instructions include spreading hot melt glue on a tile and sticking small rocks around the edges to form the base. A wire is bent and inserted into a plastic tap to represent the water flowing from the spring. Additional details include decorating the fountain with colored plastic strips and using hot melt glue to attach bars representing the flowing water.

1. • A natural water spring.
• Self-propelled car by balloon.
1

2. MATERIALS AND TOOLS
• Materials:
• A piece of tile or roof tile.
• A few groups of little rocks.
• Plastic taps.
• A piece of wire
• Plastic strips of diferent colors.
• Hot melt glue bars.
• Some tempera colors.
• Tools
• A hot melt glue gun.
• Scissors.
• Pliers
• Cutter
2

3. • (1 & 2) Spread hot melt glue over
the piece of tile and stick a little
rocks around.
• (3 & 4) Bent the wire with a
pliers and stick it in a plastic tap
(see the figures)
1 2
3
4
A natural spring of water
natural spread of water
3

4. • (5 & 6) stick the wire on a piece
of tile or rock. Stick the rock over
the previous glue bar spread.
• (7 & 8)Spread some lines over a
smooth surface with a hot melt
glue gun. Put previously some
vasseline over the surface to
unstick the bars easily (see the
figures)
A natural spring of water
5 6
7
8
4

5. A natural spring of water
• (9 & 10) stick the glue bars on the
wire with a hot melt glue gun.
Decorate the fountain with
colored plastic strips.
9 10
5
Self-propelled car by balloon
Free design