Guide to using webLMT at the base station

1. How Use WebLMT
Locally at the Base
Station
OPEYEMI PRAISE
FOR CYBERSPACE FIELD ENGINEER

2. Connect the Base Station
 Use the USB to RJ-45 Cable
 Connect the USB end to USB Port on UMPT Board at the BBU
 Connect your straight cable to the RJ-45 port of the cable

3. IP Assignment (Laptop)
 Assign your Laptop this IP Address: 192.168.0.50 (to be configured
on your LAN Adapter).

4. IP Assignment (Base Station)
 Launch Your Browser (Preferabbly Mozilla Firefox or Internet
Explorer (32-bit); It does not accept 64-bit.
 Enter the default eNodeB IP Address 192.168.0.49

5. Enter Log-in Credentials
 Enter the Log-in Credentials
 Username: admin
 Password: hwbs@com
 Generated Verification Number

6. Check Alarms and Run MML
Commands

7. Thank you