When you need Network Data Cat5 Cat6 Cabling in Kansas City for your company or small business, there are a few points you need to know in order to properly utilize the application of these communication tools.

1. Kansas City Network Cabling 6 Point
Buyers Guide
When you need Network Data Cat5 Cat6 Cabling for your
business, there are a few points you need to know in order to
properly utilize the application of these communication tools.
It always will prove useful to consult with professionals when
looking to wire your building or office for voice and data
cabling.
Discussed here are five points you need to know about network
and voice structured cabling.
1. For office cabling, it must first be determined what exactly
you need in terms of the uses for network cabling.
Do you need cabling for voice and do you require cabling for
data?

2. How many computers are in your network?
Note: Locations or drops include employee workstations as
well as common area applications such as fax machines and
conference phones.
If there is more than one, it will require a network, with a
server and properly ventilated server room, in order for the
network computers to work together and give you efficiency in
the work place.
You may require video and data in your conference room.
2. Not all cabling is alike.
For telephone usage, a Cat (or category) 3 is common.
However, Cat5E is now the standard for phones for your
network.
Cat6 for your network data is used when very large files eg cad
drawings are being sent.
Click on this link or on the picture for immediate
network cabling help.

3. 3. The type of cabling for network cabling and wiring in your
business varies in of itself.
It’s important to consider what you can afford now, but also to
consider if it will be sufficient with room to grow.
It’s logical to purchase the most you can afford now, rather
than have to restructure and expend more costs later with an
upgrade.
Remember that technology is always growing.
Cat 3 is rarely used anymore with Cat5E being used for voice.
Cat 5E for fast Ethernet carries up to 100 Mbps.
Cat 5E cable is an enhanced version of Cat 5 that adds
specifications for far end crosstalk, and has superseded Cat 5
specification.

4. Category 6 is used for gigabit connections.
Most businesses chose Cat5E.
Note: Both Category 3 and Category 5 have a maximum
segment length of 100 meters.
4. Consider Plenum versus non-Plenum. Plenum Cabling is
structured cabling and is required under building codes for
plenum commercial spaces.
Plenum rated cable has fire-resistant & slow burning casing
that emits very little smoke. The space between the structural
ceiling and the raised floor or under a dropped ceiling is
usually considered plenum. The plenum space is typically used
to house communication cables for a buildings telephone and
computer network, and allows for a cooling and ventilated
environment.
No high-voltage powered equipment is allowed in the plenum
space. It should be determined if your building requires this
cable by inquiring with your building manager.
Plenum is 30% to 40% higher in price, if not required by the
building management company then standard network cabling
will suffice.
5. Cost. A rule of thumb, depending on the factors
above ie Cat5E vs Cat6, plenum or non-plenum, and
length of the cable runs, with material and labor the
cost should be $125 to $150 per cable run or drop.

5. 6. When considering all the options and requirements to fit
your network structured cabling needs, in order to have
adequate office wiring, the best results for the future growth of
your business is to utilize cabling installation for data and voice
applications at one time, rather than over a series of
installations, which will cut your costs.
For free quotes with no obligation just click.