This document is an operator's handbook for Alcatel-Lucent's METRO OMSN equipment. It provides guidance for commissioning, operating, and maintaining the 1640FOX, 1650SMC, and 1660SM metro nodes. The handbook describes the necessary software applications and assumes the operator is familiar with the hardware, operating modes, and Windows applications. Safety warnings are referenced from the technical handbook rather than duplicated here. The handbook is a collection of documents that may have different editions and the overall edition is that of Section 1.
4. LIST OF FIGURES AND TABLES
TABLES
not permitted without written authorization from Alcatel.
Table 1. Handbooks related to the specific product hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
All rights reserved. Passing on and copying of this
document, use and communication of its contents
Table 2. Handbooks related to the specific product SW management and local product control . . 8
Table 3. Handbooks related to ATM specific product SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 4. Handbooks related to PR_EA specific product SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 5. Handbook related to ISA–PR specific product SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 6. Handbook related to ISA–ES specific product SW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 7. Handbooks common to Alcatel Network Elements using 1320CT platform . . . . . . . . . . . . . 10
Table 8. Optional handbooks common to 16xxSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Table 9. Documentation on CD–ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 2 / 24
24
5. 1 HANDBOOK STRUCTURE AND CONFIGURATION CHECK
1.1 General information
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
WARNING
ALCATEL makes no warranty of any kind with regards to this manual, and specifically disclaims the
implied warranties of merchantability and fitness for a particular purpose. ALCATEL will not be liable
for errors contained herein or for damages, whether direct, indirect, consequential, incidental, or
special, in connection with the furnishing, performance, or use of this material.
NOTICE
The product specification and/or performance levels contained in this document are for information
purposes only and are subject to change without notice. They do not represent any obligation on the
part of ALCATEL.
COPYRIGHT NOTIFICATION
The technical information of this manual is the property of ALCATEL and must not be copied,
reproduced or disclosed to a third party without written consent.
1.2 Handbook applicability
This handbook applies to the following product-releases:
PRODUCT ANV P/N
1640FOX (Rel. 4.4) 3AL 37491 AAAA
1650SMC (Rel. 4.4) 3AL 36641 AAAA
1660SM (Rel. 4.4) 3AL 36301 AAAA
1660SM (Rel. 5.2) 3AL 36301 AAAA
VERSION
PRODUCT RELEASE ANV P/N
(N.B.)
1640FOX Rel.4.4 B 3AL 80997 AEAA
1650SMC Rel.4.4 B 3AL 81018 AEAA
1660SM Rel.4.4 B 3AL 81025 AEAA
1660SM Rel.5.2 B 3AL 81407ACAA
For further information on the Alcatel software product and its physical distribution support refer to the
“Introduction” section.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 3 / 24
24
6. N.B. NOTES FOR HANDBOOKS RELEVANT TO SOFTWARE APPLICATIONS
Handbooks relevant to software applications (typically the Operator’s Handbooks) are not
not permitted without written authorization from Alcatel.
modified unless the new software ”version” distributed to Customers implies man–machine
All rights reserved. Passing on and copying of this
document, use and communication of its contents
interface changes or in case of slight modifications not affecting the understanding of the
explained procedures.
Moreover, should the screen prints included in the handbook contain the product-release’s
”version” marking, they are not replaced in the handbooks related to a subsequent version, if
the screen contents are unchanged.
1.3 Purpose of the handbook
This Handbook contains detailed information for the METRO OMSN 1640FOX, 1650SMC, 1660SM
equipment management. Unless otherwise specified, the menus have to be used for all the equipments.
This handbook describes the operations concerning commissioning, operation and maintenance that the
operators must carry out as indicated by the specific software application(s) referred to in this handbook
(see para. 1.2 on page 3).
This handbook must be used together with the associated Technical Handbook ( see Table 1. on page
7) and the 1320CT associated documentation ( see Table 7. on page 10) does not replicate information
contained into it.
In particular, all cautions relevant to safety, rules for EMC and ESD, as well as warnings regarding
operations that may cause damages to the equipment, are not duplicated here, but must be retrieved from
the Technical Handbook.
When using this handbook it is assumed that the Operators know:
• the structure (hardware composition) and all the possible operating modes of the equipment
(product-release) this handbook refers to.
• how to use a PC and the Windows ambient applications
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 4 / 24
24
7. 1.4 Handbook configuration check
This handbook is a collection of documents (each contained in a specific section) that can have
editions different from one another.
not permitted without written authorization from Alcatel.
The Edition of the whole handbook is that of Section 1 (HANDBOOK GUIDE).
All rights reserved. Passing on and copying of this
document, use and communication of its contents
The edition of the enclosed documents indicated in the following table is that of the
corresponding original internal document.
HANDBOOK EDITION 01 02 03 04 05
REGISTER AND SECTION TITLE SECTION EDITION
1 HANDBOOK GUIDE 01 02
2 INTRODUCTION MANUAL 01 02
3 NE MANAGEMENT MANUAL 01 02
4 MAINTENANCE MANUAL 01 02
5 SIBDL MANUAL 01 02
1.4.1 Notes on Ed. 01
Ed.01 issued on NOVEMBER 2004, is the first released and validated version of the handbook.
1.4.2 Notes on Ed. 02
Ed.02 issued on APRIL 2005, is the second released and validated version of the handbook.
New description added:
– ISA ES4–8FE SMII mode and GMII mode
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 5 / 24
24
8. 1AA 00014 0004 (9007) A4 – ALICE 04.10
ED
02
SC.1:HANDBOOK GUIDE
24
3AL 91670 AA AA
6 / 24
All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization from Alcatel.
9. 2 PRODUCT-RELEASE HANDBOOKS
The list of handbooks given here below is valid on the issue date of this Handbook and
can be changed without any obligation for ALCATEL to update it in this Handbook.
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
Some of the handbooks listed here below may not be available on the issue date of this
Handbook.
The standard Customer Documentation in the English language for the equipment whose
product-release-version is stated in para.1.2 on page 3 consists of the following handbooks:
Table 1. Handbooks related to the specific product hardware
THIS
REF HANDBOOK Part Number
HDBK
1640FOX Rel.4.4
3AL 91666 AAAA
Technical Handbook
1
Provide information regarding Equipment description, Maintenance,
Hardware setting documentation.
1640FOX Rel.4.4
3AL 91666 BAAA
Installation Handbook
2
Provide information regarding Equipment Installation, according to
A–Installation Engineering Dept. rules.
1640FOX Rel.4.4
3AL 91666CAAA
Turnup & Commissionig Handbook
3
Provide information regarding Equipment Turn–On, Test and Operation,
according to A–Installation Engineering Dept. rules.
1650SMC Rel.4.4
3AL 91667 AAAA
Technical Handbook
4
Provide information regarding Equipment description, Maintenance,
Hardware setting documentation.
1650SMC Rel.4.4
3AL 91667 BAAA
Installation Handbook
5
Provide information regarding Equipment Installation, according to
A–Installation Engineering Dept. rules.
1650SMC Rel.4.4
3AL 91667 CAAA
Turnup & Commissionig Handbook
6
Provide information regarding Equipment Turn–On, Test and Operation,
according to A–Installation Engineering Dept. rules.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 7 / 24
24
10. THIS
REF HANDBOOK Part Number
HDBK
1660SM Rel.4.4
not permitted without written authorization from Alcatel.
3AL91668 AAAA
All rights reserved. Passing on and copying of this
document, use and communication of its contents
Technical Handbook
7
Provide information regarding Equipment description, Maintenance,
Hardware setting documentation.
1660SM Rel.4.4
3AL 91668 BAAA
Installation Handbook
8
Provide information regarding Equipment Installation, according to
A–Installation Engineering Dept. rules.
1660SM Rel.4.4
3AL 91668CAAA
Turnup & Commissionig Handbook
9
Provide information regarding Equipment Turn–On, Test and Operation,
according to A–Installation Engineering Dept. rules.
1660SM Rel.5.2 “Version B”
3AL91669 AAAA
Technical Handbook
10
Provide information regarding Equipment description, Maintenance,
Hardware setting documentation.
1660SM Rel.5.2
3AL 91669 BAAA
Installation Handbook
11
Provide information regarding Equipment Installation, according to
A–Installation Engineering Dept. rules.
1660SM Rel.5.2
3AL 91669 CAAA
Turnup & Commissionig Handbook
12
Provide information regarding Equipment Turn–On, Test and Operation,
according to A–Installation Engineering Dept. rules.
Table 2. Handbooks related to the specific product SW management and local product control
THIS
REF HANDBOOK Part Number
HDBK
METRO OMSN REL. 4.4 & 5.2 “Version B”
3AL 91670 AAAA
CT Operator’s Handbook
13
Provides METRO OMSN “SDH” Craft Terminal screens and operational
procedures
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 8 / 24
24
11. Table 3. Handbooks related to ATM specific product SW
THIS
REF HANDBOOK Part Number HDBK
not permitted without written authorization from Alcatel.
or note
All rights reserved. Passing on and copying of this
document, use and communication of its contents
ATM Rel.1.2 3AL 80814 AAAA
14
Operator’s Handbook
ATM Rel.2.0
15 3AL 81826 AAAA
Operator’s Handbook
ATM Rel.2.1
16 3AL 89777 AAAA
Operator’s Handbook
ATM Rel.2.2
17 3AL 91714 AAAA
Operator’s Handbook
Provide ATM Terminal screens and operational procedures
Table 4. Handbooks related to PR_EA specific product SW
THIS
REF HANDBOOK Part Number HDBK
or note
PR_EA Rel. 1.1
18 3AL 81062 BAAA
Operator’s Handbook
Provides “Packet Ring Edge Aggregator” Terminal screens and operational
procedures
Table 5. Handbook related to ISA–PR specific product SW
FACTORY THIS
REF HANDBOOK ANV Part No.
Part No. HDBK
ISA–PR Rel. 1.0
19 3AL 81771 AAAA ––
Operator’s Handbook
ISA–PR Rel. 1.1
20 3AL 91658 AAAA ––
Operator’s Handbook
ISA–PR Rel. 1.2
21 3AL 91715 AAAA ––
Operator’s Handbook
1AA 00014 0004 (9007) A4 – ALICE 04.10
Provides ISA_PR board Craft Terminal screens and operational procedures
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 9 / 24
24
12. Table 6. Handbook related to ISA–ES specific product SW
THIS
REF HANDBOOK ANV Part No.
HDBK
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
ISA–ES1 Rel. 1.0
22 3AL 89872 AAAA
Operator’s Handbook
ISA–ES1/ES4 Rel. 1.1
23 3AL 89871 AAAA
Operator’s Handbook
ISA–ES1/ES4 Rel. 1.2
24 3AL 91804 AAAA
Operator’s Handbook
ISA–ES16 Rel. 2.0
25 3AL 89870 AAAA
Operator’s Handbook
ISA–ES16 Rel. 2.1
26 3AL 91716 AAAA
Operator’s Handbook
Provides ISA_ES board Craft Terminal screens and operational procedures
Table 7. Handbooks common to Alcatel Network Elements using 1320CT platform
THIS
HDBK
REF HANDBOOK Part Number
OR
NOTE
1320CT 3.x
3AL 79551 AAAA
Basic Operator’s Handbook
27
Provides general information and operational procedures common to all 1320CT
(Craft terminal) of Alcatel InfoModel Network Elements.
1330AS Rel. 6.5
3AL 88876 AAAA
Operator’s Handbook
28
Provides detailed information and operational procedures regarding the alarm
Surveillance software embedded in the 1320CT software package.
ELB 2.X
3AL 88877 AAAA
Operator’s Handbook
29
Provide detailed information and operational procedures regarding the Event
Log Browsing software embedded in the 1320CT software package.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 10 / 24
24
13. Table 8. Optional handbooks common to 16xxSM
FACTORY THIS
REF HANDBOOK ANV Part No.
Part No. HDBK
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
S9–16xxSM
3AL 78901 AAAA 955.100.692 N
System Installation Handbook
30
Provides general installation rules necessary to install the Optinex family
equipment in the S9 Rack .
Optinex RACK–16xxSM
3AL 38207 AAAA 955.110.202 L
System Installation Handbook
31
Provides general installation rules necessary to install the Optinex family
equipment in the Optinex Rack .
N.B. Handbooks REF. 30 and 31 are available only on paper support.
Table 9. Documentation on CD–ROM
See para. 5.5 on page 23
REF CD–ROM TITLE Part Number
METRO OMSN 4.4 & 5.2 CD–ROM EN 3AL 91671 AAAA
32
Contains, in electronic format, the following handbooks: REF. 1 to 13
1320CT 3.x BASIC CD–ROM–DOC EN 3AL79552 AAAA
33
Contains, in electronic format, the following handbooks: REF. 27 to 29
ATM 1.2 CD–ROM–DOC EN 3AL 80815 AAAA
34
Contains, in electronic format, the following handbook: REF. 14 on page 9
ATM 2.0 CD–ROM–DOC EN 3AL 81829 AAAA
35
Contains, in electronic format, the following handbook: REF. 15 on page 9
ATM 2.1 CD–ROM–DOC EN 3AL 89778 AAAA
36
Contains, in electronic format, the following handbook: REF. 16 on page 9
ATM 2.2 CD–ROM–DOC EN 3AL 91714 AAAA
37
Contains, in electronic format, the following handbook: REF. 17 on page 9
PR_EA 1.1 CD–ROM EN 3AL 81063 BAAA
1AA 00014 0004 (9007) A4 – ALICE 04.10
38
Contains, in electronic format, the following handbook: REF. 18 on page 9
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 11 / 24
24
14. REF CD–ROM TITLE Part Number
PR 1.0 CD–ROM EN 3AL 81769 AAAA
not permitted without written authorization from Alcatel.
39
All rights reserved. Passing on and copying of this
document, use and communication of its contents
Contains, in electronic format, the following handbook: REF. 19 on page 9
PR 1.1 CD–ROM EN 3AL 91659 AAAA
40
Contains, in electronic format, the following handbook: REF. 20 on page 9
PR 1.2 CD–ROM EN 3AL 91718 AAAA
41
Contains, in electronic format, the following handbook: REF. 21 on page 9
ES1 1.0 CD–ROM EN 3AL89875 AAAA
42
Contains, in electronic format, the following handbook: REF. 22 on page 10
ES1/ES4 1.1 CD–ROM EN 3AL89871 AAAA
43
Contains, in electronic format, the following handbook: REF. 23 on page 10
ES1/ES4 1.2 CD–ROM EN 3AL91805 AAAA
44
Contains, in electronic format, the following handbook: REF. 24 on page 10
ES16 2.0 CD–ROM–DOC EN 3AL 89873 AAAA
45
Contains, in electronic format, the following handbooks: REF. 25 on page 10
ES16 2.1 CD–ROM–DOC EN 3AL 91719 AAAA
46
Contains, in electronic format, the following handbooks: REF. 26 on page 10
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 12 / 24
24
15. 3 SAFETY NORMS AND LABELS
3.1 First aid for electric shock
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
Do not touch the patient with bare hands until the circuit has been opened.
Open the circuit by switching off the line switches. If that is not possible, protect yourself with dry
material and free the patient from the conductor.
ARTIFICIAL RESPIRATION
It is important to start mouth to mouth resuscitation at once and seek doctor help immediately.
TREATMENT OF BURNS
This treatment should be used after the patient has regained consciousness. It can also be employed while
the artificial respiration is being applied (in this case there should be at least two persons present).
WARNING:
• Do not attempt to remove his clothing from the burnt parts;
• Apply dry gauze on the burns;
• Do not apply ointments or other oily substances.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 13 / 24
24
16. Mouth to mouth resuscitation method
Lay the patient supine with his arms parallel with the body, if the patient is laying
not permitted without written authorization from Alcatel.
on an inclined plane, make sure that his stomach is slightly lower than his chest.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
1
Open the patient’s mouth and check that there are no extraneous bodies in his
mouth (dentures, chewing–gum etc.),
Kneel beside the patient level with his head. Put
a hand under the patient’s head and one under
2
his neck (see fig.) Lift the patient’s head and let
it recline backwards as far as possible
Shift the hand from the patient’s neck to is chin:
place your thumb between his chin and his
mouth, the index along his jawbone, and keep the
3 other fingers closed together (see fig.). While
performing these operations take a good supply
of oxygen by taking deep breaths with your
mouth open.
With your thumb between the patient’s chin and
4 mouth keep his lips together and blow into his
nasal cavities (see fig.)
While performing these operations observe if the
patient’s chest rises (see fig.) If not it is possible
that his nose is blocked: in that case open the
patient’s mouth as much as possible by pressing
on his chin with your hand, place your lips around
5 his mouth and blow into his oral cavity. Observe
if the patient’s chest heaves. This second
method can be used instead of the first even
when the patient’s nose is kept closed by
pressing the nostrils together using the hand you
were holding his head with. The patient’s head
must be kept sloping backwards as much as
possible.
6 Start with ten rapid expirations, hence continue at a rate of twelve/fifteen
expirations per minute. Go on like this until the patient has regained
consciousness, or until a doctor has ascertained his death.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 14 / 24
24
17. 3.2 Norms and labels
Refer to the Technical Handbook associated to ALCATEL’s designed and manufactured equipment
to obtain the following information:
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
– COMPLIANCE WITH EUROPEAN NORMS.
– SAFETY RULES
• General rules
• Harmful optical signals
• Risk of explosion
• Moving mechanical parts
• Heat–radiating Mechanical Parts
– ELECTROMAGNETIC COMPATIBILITY
– ELECTROSTATIC DISCHARGERS (ESD)
– EQUIPMENT LABELS
Identical or similar information on Personal Computer, Work–Station etc., other than ALCATEL’s, loaded
with software applicative described in this Handbook, is supplied in the Constructor’s technical
documentation.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 15 / 24
24
18. 1AA 00014 0004 (9007) A4 – ALICE 04.10
ED
02
SC.1:HANDBOOK GUIDE
24
3AL 91670 AA AA
16 / 24
All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization from Alcatel.
19. 4 HANDBOOK DESCRIPTION
This handbook is composed of the following Manuals:
not permitted without written authorization from Alcatel.
SECTION 1: HANDBOOK GUIDE (This document)
All rights reserved. Passing on and copying of this
document, use and communication of its contents
The Handbook Guide gives general information on the application and use of the Handbook. The
Handbook Guide includes the following chapters:
– Chapter 1: Handbook structure and configuration check. This chapter gives information on the whole
handbook application, composition and evolution.
– Chapter 2: Product-release handbooks. This chapter lists the handbooks the Operator should have
in order to carry out the tasks allowed by the specific product–release this handbook refers to.
– Chapter 3: Safety norms and labels
– Chapter 4: Handbook description
– Chapter 5: General on Alcatel Customer Documentation
SECTION 2: INTRODUCTION Manual
The Introduction Manual describes the main features of the graphical interface and provides a general
overview of the system architecture and the different functionalities provided by the Craft Terminal. The
Introduction Manual includes the following chapters:
– Chapter 1: Introduction. This chapter gives the structure of this manual.
– Chapter 2: General description of the Craft Terminal. The Craft Terminal is introduced and the
software product listed. The Craft Terminal main functionality in the NE management (EML–USM)
are listed and briefly described.
– Chapter 3: Acronyms and abbreviations. The acronyms used in all the operator manuals are listed.
– Chapter 4: Glossary of terms. Definitions concerning the acronyms.
SECTION 3: NETWORK ELEMENT MANAGEMENT Manual
The aim of this document is to describe the Craft Terminal view, inserting operative information.
The Network Element Manual includes the following chapters:
– Chapter 1: Introduction. This chapter gives the structure of this manual.
– Chapter 2: General introduction on views and menus. The view organization is presented and the
menus available listed and briefly described.
– Chapter 3: NE management supervision. This chapter is dedicated to the NE states and NE access.
– Chapter 4: NE management general configuration. In this chapter general configuration referred to
the equipment management are described (CT access, NE Time, Alarm Configuration etc).
– Chapter 5: Security Management. In this chapter configuration referred to the Security management
are described (ACD level and Manager list).
1AA 00014 0004 (9007) A4 – ALICE 04.10
– Chapter 6: External input and output points management. This chapter describes how to display and
set the input/output environmental alarm (housekeeping alarm).
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 17 / 24
24
20. – Chapter 7: Diagnosis management. In this chapter are specified: access to the Alarm Surveillance
to show the alarm condition, abnormal condition list (as result of operator’s command), access to the
Event and Alarm Log file and Internal Link Monitor.
not permitted without written authorization from Alcatel.
– Chapter 8: Communication and Routing management. In this chapter are presented the
All rights reserved. Passing on and copying of this
document, use and communication of its contents
communication and routing parameters, concerning the OSI and IP communication protocols for
the local NE, the OS and each other related NE in order to provide a global communication
capabilities inside the network
– Chapter 9: Equipment management. This chapter deals mainly with the setting and changing of the
boards present on the Equipment and undertaking board protection operations.
– Chapter 10: Board view. This chapter permits to show the physical port available in a specific board
(alarm synthesis and port symbol), to access the port view and to change the physical interface.
– Chapter 11: Port view. This chapter permits to set and show the transmission resources referred to
the Port.
– Chapter 12: Equipment Protection management (EPS). This chapter permits to manage the EPS
protection, setting the relevant configuration.
N.B. EPS is not applicable in 1640FOX
– Chapter 13: Multiplex Section protection management. This chapter permits to manage the MSP
protection.
– Chapter 14: Transmission view. This chapter permits to show and set the Termination Point of the
equipment, thus having an overview of the complete signal flow of the various port.
– Chapter 15: Cross connection management. This chapter permits to manage the connection of the
paths.
– Chapter 16: Overhead management. This chapter permits to manage the Overhead, setting the
relevant configuration.
– Chapter 17: Performance Monitoring management. This chapter permits to set and show
Performance Monitoring parameters and data.
– Chapter 18: Synchronization management. This chapter permits to set and show Synchronization
parameters and status.
– Chapter 19: MS–SPRing Management. This chapter permits to set the MS–SPRing protection of the
NE
N.B. MS–SPRing Management menu is available only for 1660SM
– Chapter 20: ISA port Configuration. This chapter describes the operations necessary for the
ATM/PR_EA/Ethernet boards creation and the ATM/PR_EA/Ethernet TTPs creation.
– Chapter 21: Software management. This chapter permits to update the NE by means download
procedure and to manage NE software.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 18 / 24
24
21. SECTION 4: NETWORK ELEMENT MAINTENANCE Manual
This document aims at introducing the Maintenance procedure, inserting information useful to identify
alarms and troubleshoot the NE.
not permitted without written authorization from Alcatel.
The Maintenance Manual includes the following chapters:
All rights reserved. Passing on and copying of this
document, use and communication of its contents
– Chapter 1: Introduction. This chapter gives the structure of this manual.
– Chapter 2: Craft Terminal Maintenance Introduction.
This chapter:
• list the maintenance steps;
• for the “Maintenance of the Personal Computer”, refers to the personal Computer
manual;
• describes the problem with Craft terminal (shut–down and restart of the PCis
indicated).
– Chapter 5: Troubleshooting (Corrective Maintenance). Detection location and correction of failure
are presented.
– Chapter 6: Unit replacement with spare. The replacement procedure is detailed.
– Chapter 7: Upgrading with New Hardware. The Hardware upgrading procedure is detailed.
– Chapter 8: FLASH card substitution. The FLASH card substitution procedure is detailed.
SECTION 5: SIBDL Manual
This document describes the download procedure with SIBDL.
The SIBDL Manual includes the following chapters:
– Chapter 1: Introduction
– Chapter 2: Download with SIBDL configuration
– Chapter 3: Configuration for SIBDL
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 19 / 24
24
22. 1AA 00014 0004 (9007) A4 – ALICE 04.10
ED
02
SC.1:HANDBOOK GUIDE
24
3AL 91670 AA AA
20 / 24
All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization from Alcatel.
23. 5 GENERAL ON ALCATEL CUSTOMER DOCUMENTATION
5.1 Products, product-releases, versions and Customer Documentation
not permitted without written authorization from Alcatel.
All rights reserved. Passing on and copying of this
document, use and communication of its contents
A ”product” is defined by the network hierarchical level where it can be inserted and by the whole of
performance and services for which it is meant.
A ”product” evolves through successive ”product-releases” which are the real products marketed for
their delivery at a certain ”product-release” availability date.
So, a ”product–release” defines a set of hardware components and a software package which, as a whole,
identify the possible network applications and the equipment performance which the specific
”product-release” has been designed, engineered and marketed for.
In some cases a ”product-release” has further development steps, named ”versions”, that are born to
improve or add some performance (mainly software) with respect to the previous version, or for bug fixing
purposes.
A ”product-release” has its own standard Customer Documentation, composed by one or more
handbooks.
A new ”version” of a ”product-release” may or may not produce a change in the status of the Customer
Documentation set, as described in para.5.4 on page 22.
5.2 Handbook supply to Customers
Handbooks are not automatically delivered together with the equipment they refer to.
The number of handbooks per type to be supplied must be decided at contract level.
5.3 Aims of standard Customer Documentation
Standard Customer Documentation, referred to hereafter, must be always meant as plant-independent.
Plant-dependent documentation, if envisaged by the contract, is subjected to commercial criteria as far
as contents, formats and supply conditions are concerned (plant-dependent documentation is not
described here).
Standard hardware and software documentation is meant to give the Customer personnel the possibility
and the information necessary for installing, commissioning, operating and maintaining the equipment
according to Alcatel–Telecom Laboratory design choices.
In particular the contents of the handbooks associated to the software applications focus on the
explanation of the man-machine interface and of the operating procedures allowed by it.
Consequently, no supply to the Customers of design documentation (like software source programs,
programming tools, etc.) is envisaged.
1AA 00014 0004 (9007) A4 – ALICE 04.10
ED 02 SC.1:HANDBOOK GUIDE
3AL 91670 AA AA 21 / 24
24