http://selflevelingconcrete.net - The best thing about self-leveling concrete curing is that it is only a matter of hours. A characteristic not found in conventional concrete. The following process can serve as your guide.

1. Self Leveling Concrete Curing Guide
The best thing about self-leveling concrete curing is that it is only a matter of hours. A
characteristic not found in conventional concrete.
This is actually one of the advantages you get by using a self-leveling concrete material to your
floor repair, resurfacing and finishing projects. Learning about the concrete curing process and
how long it takes allows you to decide on which material gives you the best advantage. The
following process can serve as your guide.
Spreading
Apply the self-leveling concrete mixture to the surface with a trowel. It is advisable to mix only
the amount of concrete you can use in a 15-minute interval since it dries quickly than
conventional concrete.
Smoothing
Smooth out the poured mixture using a squeegee and work on all corners as quick as you can.
Drying
You will need to wait for about 30 minutes for the poured concrete to set up and get into place.
Then leave to dry for 12 hours, you can also dry-cure it if you’re working in a moderate climate.
Misting
During hot or windy conditions, spray the self-leveling concrete area with water. Do this for the
first three hours after working on the entire surface to prevent it from drying quickly.
Curing
Let it dry after spraying with water and allow it to dry naturally. After 12 hours the concrete
curing is complete and ready for final floor covering.